Head Protection

Hard hats, Type II safety helmets, bump caps, suspensions, chin straps, sun shades and winter liners from MSA, Studson, Portwest, Liberty, PIP and OccuNomix. Class and type are stated on every hat; logo imprinting is available on MSA, PIP, Fibre-Metal, Studson and KASK hard hats and helmets.

In this category

427 products from PIP, JSP, Portwest, Nightstick, Studson and 34 more brands. Electrical Class: Class E (56), Class C (36), Class G (7). Suspension: 4 Point Nylon Webbing Cradle (27), 6 Point Polyester (19), 6-point (11), SuperEight (10), Foam Cradle System (10), Polyester Textile Straps (9) and 14 more. Material: High Density Polyethylene (15), Cotton (14), Polyethylene (11), Engineered polymer (10), HDPE (9), Modacrylic (6) and 38 more. Sold by the pack (39), individually (23), by the dozen (4).

Brands in this category: PIP (89) · JSP (48) · Portwest (34) · Nightstick (25) · Studson (23) · MSA (21) · OccuNomix (21) · Fibre-Metal (20) · Liberty Safety (20) · North (18) · Dynamic (16) · Radians (12) · Ergodyne (11) · Jackson Safety (10) · Kask (9) · Bullard (6) · Comeaux Caps (6) · Anchor Brand (5) · DEWALT (5) · Draeger (4) · 3M (2) · LAPCO (2) · Milwaukee Tool (2) · Streamlight (2) · WaveCel (2) · UVEX (1) · Accuform (1) · Best Welds (1) · DuPont Tyvek (1) · Energizer (1) · EVO ALTA Ascend (1) · Hardknock (1) · LIFT Safety (1) · Lincoln Electric (1) · MCR Safety (1) · Miller Electric (1) · Pyramex (1) · Tillman (1) · Reflective Apparel (1)

Browse by type

Head Protection Accessories (161) · Hard Hats (106) · Safety Helmets (61) · Winter Liners & Caps (61) · Bump Caps (26) · Welder Caps & Doo Rags (12)

How to read a hard hat rating

ANSI/ISEA Z89.1 marks a hard hat by Type and Class. Type I is tested for top impact, Type II for top and lateral impact. Class G (General) is tested to 2,200 volts, Class E (Electrical) to 20,000 volts, Class C (Conductive) is not tested for electrical protection and may have vents or metal parts. The label under the brim shows the type, class, manufacture date and, where tested, the reverse-donning arrow, LT (low temperature) and HV (high visibility) marks.

Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.