Eyewash Parts & Accessories
11 eyewash parts & accessories from every brand we carry, listed with what each manufacturer publishes, and live prices.
Pick a ansi class, ansi type, brand or case; the list below narrows as you choose. Prices are live.

11 products
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
Fendall5 products
- Fendall 32-002450-0000 Eyewash Parts & Accessories, Replacement Cartridge — Fendall
- Fendall Porta Stream 32-000102-0000 Eyewash Parts & Accessories — Fendall
- Fendall Porta Stream 32-000105-0000 Eyewash Parts & Accessories — Fendall
- Fendall Porta Stream II 32-000201-0000 Eyewash Parts & Accessories — Fendall
- Fendall Porta Stream II 32-000203-0000 Eyewash Parts & Accessories — Fendall
Haws5 products
- Haws 9082 Eyewash Parts & Accessories, Eyewash Water Preservative, Pack of 4 — Haws
- Haws 9084 Eyewash Parts & Accessories, Eyewash Tank Cleansing Stick — Haws
- Haws SP157A Eyewash Parts & Accessories, Scald Protection Bleed Valve — Haws
- Haws SP260 Eyewash Parts & Accessories, Stay-Open Shower Ball Valve, 1 in NPT — Haws
- Haws SP829 Eyewash Parts & Accessories, AXION MSR Drench Shower Head, 20 GPM — Haws
Bradley1 product
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. Workplace first aid kits are labelled under ANSI/ISEA Z308.1 by Class and Type. Class A kits carry the basic supplies for common injuries; Class B kits carry more of each item plus extra items for larger or higher-risk workplaces. The Type says what the case is built for: Type I mounted indoors, Type II portable indoors, Type III portable and water-resistant for indoor or outdoor use, Type IV portable and waterproof for rough outdoor use. Refills are matched to the kit the manufacturer lists them for.
Technical. ANSI/ISEA Z308.1-2021 lists minimum contents by class (for example 16 adhesive bandages, 1 absorbent compress and 2 trauma pads for Class A; 50 adhesive bandages, 2 absorbent compresses, 4 trauma pads and a tourniquet for Class B) and tests the container for Types I–IV (mounting, portability, water resistance, impact). OSHA 29 CFR 1910.151 requires readily available first aid supplies and references Z308.1 as a guide. Eyewash stations are built to ANSI/ISEA Z358.1 (15-minute flush).
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
ANSI/ISEA Z308.1 kit classes and container types
| Class | Intended for |
|---|---|
| Class A | The most common workplace injuries; the basic assortment |
| Class B | A broader range and quantity of supplies for more complex or higher-risk environments |
| Type | Container |
|---|---|
| Type I | Mounted, indoor use |
| Type II | Portable, indoor use |
| Type III | Portable, indoor or outdoor, water-resistant |
| Type IV | Portable, indoor or outdoor, waterproof, impact-tested |
Source: ANSI/ISEA Z308.1-2021, Minimum Requirements for Workplace First Aid Kits and Supplies. OSHA 29 CFR 1910.151 references it as a guide. Eyewash stations: ANSI/ISEA Z358.1 (15-minute flush).
