ANSI Class 1 Hi-Vis Vests
10 ANSI class 1 hi-vis vests from every brand we carry, listed with what each manufacturer publishes, and live prices.
Pick a ansi type, brand or closure; the list below narrows as you choose. Prices are live.
10 garments
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
Radians6 garments
- Radians SV010X-1 Hi-Vis Vests, Economy Break Away Vest X-Back — Radians · ANSI type / class: Type R Class 1 · Material: Mesh
- Radians SV020X-1 Hi-Vis Vests, Heavy Duty 7-Pocket Tear Away Cruiser Vest X-Back — Radians · ANSI type / class: Type O Class 1 · Material: Mesh, Solid
- Radians SV030X-1 Hi-Vis Vests, Heavy Duty 10-Pocket Cruiser Vest — Radians · ANSI type / class: Type O Class 1 · Material: Solid
- Radians SV22-1 Hi-Vis Vests, Economy Type O Class 1 Two Tone Safety Vest — Radians · ANSI type / class: Type O Class 1 · Material: Mesh
- Radians SV59-1ZBM Hi-Vis Vests, SV59-1 Type O Class 1 Heavy Duty Surveyor Safety — Radians · ANSI type / class: Type O Class 1 · Material: Mesh
- Radians SV6P-1 Hi-Vis Vests, Type O Class 1 Mesh Surveyor Vest — Radians · ANSI type / class: Type O Class 1 · Material: Mesh
PIP2 garments
- PIP 301-0500M Hi-Vis Vests, ANSI Type O Class 1 Two-Tone Eleven Pocket Mesh — PIP · ANSI type / class: Type O Class 1 · Material: Mesh · Closure: Zipper · Pockets: 11 · Tape width: 2 in
- PIP 302-0800D-BK Hi-Vis Vests, ANSI Type O Class 1 Black Two-Tone Eleven Pocket — PIP · ANSI type / class: Type O Class 1 · Material: Mesh, Polyester · Closure: Zipper · Pockets: 15 · Tape width: 2 in
Radwear USA2 garments
- Radwear USA Hi-Vis Vests, CSV22 Custom Type O Class 1 Safety Vest — Radwear USA · ANSI type / class: Type O Class 1
- Radwear USA Hi-Vis Vests, CSV6 Custom Type O Class 1 Safety Vest — Radwear USA · ANSI type / class: Type O Class 1
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. ANSI/ISEA 107 sorts high-visibility garments by how much fluorescent background material and reflective tape they carry. Class 1 is the least, Class 2 is the mid level and Class 3 the most; Class E is for pants and bibs that only reach Class 3 when worn with a Class 2 or 3 top. The Type says where the garment is meant for: Type R for roadway and temporary traffic control, Type O for off-road work, Type P for public safety. The manufacturer prints the Type and Class on the label; non-ANSI garments carry no rating.
Technical. ANSI/ISEA 107-2020 (and 107-2015, which most labels still cite) sets minimum areas of background material and retroreflective material per class: Class 1 at least 217 sq in background and 155 sq in reflective; Class 2 at least 775 sq in background and 201 sq in reflective; Class 3 at least 1,240 sq in background and 310 sq in reflective, with sleeves; Class E supplemental garments at least 465 sq in background and 109 sq in reflective. Type R garments must meet Class 2 or 3; Type O is Class 1; Type P may be Class 2 or 3 with a lower background minimum. Flame-resistant hi-vis is tested separately (ASTM F1506, NFPA 2112, or ASTM D6413 for a self-extinguishing fabric) and is marked FR here only where the manufacturer rates it.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
ANSI/ISEA 107-2020 minimum material areas by class
| Class | Background material (sq in) | Retroreflective material (sq in) | Garment types |
|---|---|---|---|
| Class 1 | 217 | 155 | Type O (off-road) only |
| Class 2 | 775 | 201 | Type R (roadway) and Type P (public safety) |
| Class 3 | 1,240 | 310 | Type R and Type P; must have sleeves |
| Class E | 465 | 109 | Supplemental pants, bibs and shorts; Class 3 ensemble when worn with a Class 2 or 3 top |
Source: ANSI/ISEA 107-2020, American National Standard for High-Visibility Safety Apparel. Flame resistance is a separate test (ASTM F1506, NFPA 2112).