Ironcat Welding Apparel
26 welding apparel from Ironcat, listed with what Ironcat publishes, and live prices.
Pick a leather, shade or cuff; the list below narrows as you choose. Prices are live.
26 products
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
Ironcat26 products
- Ironcat 7000 Welding Apparel, Split Leather Welding Cape Sleeve — Ironcat
- Ironcat 7001 Welding Apparel, Split Leather Welding Bib — Ironcat
- Ironcat 7005 Welding Apparel, Split Leather Welding Jacket — Ironcat · Leather: Split Cowhide
- Ironcat 7010 Welding Apparel, Split Leather Welding Apron — Ironcat · Leather: Split Cowhide
- Ironcat 7011 Welding Apparel, Leather Split Leg Welding Apron — Ironcat
- Ironcat 7012 Welding Apparel, Split Leather Waist Apron — Ironcat
- Ironcat 7020 Welding Apparel, Split Leather Sleeves — Ironcat · Leather: Split Cowhide
- Ironcat 7030 Welding Apparel, Leather Shoe Protectors — Ironcat
- Ironcat 7040 Welding Apparel, Economy FR Treated 100% Cotton Welders Jacket, 30" — Ironcat · Standards: ASTM D6413
- Ironcat 7041 Welding Apparel, 100% FR Cotton Sleeve, Elastic Ends — Ironcat · Material: Cotton, Twill · Standards: ASTM D6413
- Ironcat 7042 Welding Apparel, FR Treated 100% Cotton Sleeve — Ironcat · Material: Cotton, Twill · Standards: ASTM D6413
- Ironcat 7042R Welding Apparel, FR Treated 100% Cotton Sleeve — Ironcat
- Ironcat 7043 Welding Apparel, Economy FR Treated 100% Twill Cotton Apron — Ironcat · Standards: ASTM D6413
- Ironcat 7044R Welding Apparel, FR Treated 100% Cotton Cape Sleeve — Ironcat
- Ironcat 7045R Welding Apparel, FR Treated 100% Cotton Bib — Ironcat
- Ironcat 7050 Welding Apparel, FR Treated 100 % Cotton Sateen Jacket — Ironcat · Material: Sateen · Standards: ASTM D6413
- Ironcat 7051 Welding Apparel, FR Treated 100% Cotton Sateen Cape Sleeve — Ironcat · Standards: ASTM D6413
- Ironcat 7052 Welding Apparel, FR Treated 100% Cotton Sateen Bib Apron for Cape — Ironcat · Material: Sateen · Standards: ASTM D6413
- Ironcat 7060 Welding Apparel, FR Treated 100% Cotton Sateen Jacket — Ironcat · Standards: ASTM D6413
- Ironcat 7070 Welding Apparel, FR Treated 100% Cotton Sateen sleeves — Ironcat · Material: Sateen · Standards: ASTM D6413
- Ironcat 7070B Welding Apparel, FR Treated 100% Cotton Sateen sleeves — Ironcat · Standards: ASTM D6413
- Ironcat 7071 Welding Apparel, FR Treated 100% Cotton Sateen Sleeves — Ironcat · Standards: ASTM D6413
- Ironcat 7080 Welding Apparel, FR Treated 100% Cotton Sateen Apron — Ironcat · Standards: ASTM D6413
- Ironcat Proban 8051 Arc Flash Clothing, FR 7 oz. Cotton/Leather Cape Sleeve — Ironcat · Arc rating: 10 cal/cm² · Standards: NFPA 70E; NFPA 2112; ASTM F1506
- Ironcat Proban 8052 Arc Flash Clothing, FR 7 oz. Cotton Bib Apron for Cape — Ironcat
- Ironcat Proban 8053 Arc Flash Jackets, FR 7oz. Cotton/Leather Jacket, 10Cal/cm2 — Ironcat · Leather: Split Cowhide · Arc rating: 10 cal/cm² · Standards: NFPA 70E; NFPA 2112; ASTM F1506
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. Welding protection is described by what it is made of and what it blocks. Gloves are listed by leather type (cowhide, goatskin, deerskin, pigskin; grain or split), cuff length and lining, as the manufacturer states them; MIG and stick gloves are usually heavier split leather, TIG gloves thinner grain leather. Helmets and lenses are listed by shade number, the darkness of the filter (a higher number is darker), and by viewing area. FR welding clothing carries the manufacturer's arc rating in cal/cm² where it has one.
Technical. Welding filter shades follow ANSI Z87.1 (W plus the shade number) and AWS/OSHA 29 CFR 1910.133 shade tables by process and amperage; auto-darkening helmets state a light state (usually 3 or 4) and a dark-state range (for example 9–13). Welding gloves and clothing are tested to ASTM F1060 / ANSI/ISEA 105 for conductive heat and EN 407 in Europe; FR fabrics to ASTM F1506 or NFPA 2112; arc ratings (ATPV or EBT, cal/cm²) to ASTM F1959. Values shown are the manufacturer's.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
Minimum protective shade by process (OSHA)
| Process | Electrode size or current | Minimum shade |
|---|---|---|
| Shielded metal arc (stick) | Under 3 mm electrode | 7 |
| Shielded metal arc (stick) | 3 to 5 mm | 8 |
| Shielded metal arc (stick) | 5 to 8 mm | 10 |
| Shielded metal arc (stick) | Over 8 mm | 11 |
| Gas metal arc (MIG) and flux cored | Under 60 A | 7 |
| Gas metal arc (MIG) and flux cored | 60 to 500 A | 10 |
| Gas tungsten arc (TIG) | Under 150 A | 8 |
| Gas tungsten arc (TIG) | 150 to 500 A | 10 |
| Plasma arc cutting | Light, medium, heavy | 8, 9, 10 |
| Carbon arc welding | — | 14 |
| Oxyfuel gas cutting | Light, medium, heavy | 3, 4, 5 |
Source: OSHA 29 CFR 1910.133(a)(5), Table E-1, Filter Lenses for Protection Against Radiant Energy (minimum protective shade; a darker shade may be used). Lens marks per ANSI Z87.1 (W + shade).