Lincoln Electric Welding Helmets & Face Protection
13 welding helmets & face protection from Lincoln Electric, listed with what Lincoln Electric publishes, and live prices.
Pick a leather, shade or cuff; the list below narrows as you choose. Prices are live.
13 products
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
Lincoln Electric13 products
Open the Lincoln Electric page
- Lincoln Electric K3028-4 Welding Helmets, Black — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.82 x 2.44 in, 9.3 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379
- Lincoln Electric K3028-5 Welding Helmets, Viking ADV — Lincoln Electric · Shade: Shade 5-13
- Lincoln Electric K3034-4 Welding Helmets, Black — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.34 in, 12.5 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379, AS/NZS 1338.1
- Lincoln Electric K3034-5 Welding Helmets, Viking ADV — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.15 in, 11.8 sq in
- Lincoln Electric K3101-4 Welding Helmets, Mojo Graphic — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.34 in, 12.5 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379, AS/NZS 1338.1
- Lincoln Electric K3540-3 Welding Helmets, Viking FGS — Lincoln Electric · Shade: Shade 5-13
- Lincoln Electric K3683-4 Welding Helmets, Daredevil Graphic — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.34 in, 12.5 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379, AS/NZS 1338.1
- Lincoln Electric K4034-4 Welding Helmets, Code Red Graphic — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.34 in, 12.5 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379, AS/NZS 1338.1
- Lincoln Electric K4440-4 Welding Helmets, Hot Rodders Graphic — Lincoln Electric · Shade: Shade 5-13 · Viewing area: 3.74 x 3.34 in, 12.5 sq in · Standards: ANSI Z87.1-2010, CSA Z94.3, EN 379, AS/NZS 1338.1
- Lincoln Electric KP3047-1 Hard Hat Accessories, Viking Hard Hat Adapter — Lincoln Electric · Material: Nylon
- Lincoln Electric KP3908-1 Welding Helmets, Viking Gen 3 Pivot — Lincoln Electric
- Lincoln Electric KP3938-1 PAPR & Supplied Air Respirators, Viking PAPR — Lincoln Electric
- Lincoln Electric KP4470-1 Welding Helmets, Viking X6 6-Point — Lincoln Electric
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. Welding protection is described by what it is made of and what it blocks. Gloves are listed by leather type (cowhide, goatskin, deerskin, pigskin; grain or split), cuff length and lining, as the manufacturer states them; MIG and stick gloves are usually heavier split leather, TIG gloves thinner grain leather. Helmets and lenses are listed by shade number, the darkness of the filter (a higher number is darker), and by viewing area. FR welding clothing carries the manufacturer's arc rating in cal/cm² where it has one.
Technical. Welding filter shades follow ANSI Z87.1 (W plus the shade number) and AWS/OSHA 29 CFR 1910.133 shade tables by process and amperage; auto-darkening helmets state a light state (usually 3 or 4) and a dark-state range (for example 9–13). Welding gloves and clothing are tested to ASTM F1060 / ANSI/ISEA 105 for conductive heat and EN 407 in Europe; FR fabrics to ASTM F1506 or NFPA 2112; arc ratings (ATPV or EBT, cal/cm²) to ASTM F1959. Values shown are the manufacturer's.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
Minimum protective shade by process (OSHA)
| Process | Electrode size or current | Minimum shade |
|---|---|---|
| Shielded metal arc (stick) | Under 3 mm electrode | 7 |
| Shielded metal arc (stick) | 3 to 5 mm | 8 |
| Shielded metal arc (stick) | 5 to 8 mm | 10 |
| Shielded metal arc (stick) | Over 8 mm | 11 |
| Gas metal arc (MIG) and flux cored | Under 60 A | 7 |
| Gas metal arc (MIG) and flux cored | 60 to 500 A | 10 |
| Gas tungsten arc (TIG) | Under 150 A | 8 |
| Gas tungsten arc (TIG) | 150 to 500 A | 10 |
| Plasma arc cutting | Light, medium, heavy | 8, 9, 10 |
| Carbon arc welding | — | 14 |
| Oxyfuel gas cutting | Light, medium, heavy | 3, 4, 5 |
Source: OSHA 29 CFR 1910.133(a)(5), Table E-1, Filter Lenses for Protection Against Radiant Energy (minimum protective shade; a darker shade may be used). Lens marks per ANSI Z87.1 (W + shade).