PVC Chemical Gloves, 12 in
12 PVC chemical gloves, 12 in from every brand we carry, listed with what each manufacturer publishes, and live prices.
Pick a brand, thickness or lining; the list below narrows as you choose. Prices are live.
12 gloves
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
PIP6 gloves
- PIP 1027R Chemical Resistant Gloves, PVC Coated, PVC Dipped Glove — PIP · Material: PVC · Length: 12 in · Lining: Interlock · Grip: Semi-Rough
- PIP PermFlex 58-8651 Chemical Resistant Gloves, PVC Coated, 12" — PIP · Material: PVC · Length: 12 in · Lining: Interlock · Grip: Rough
- PIP ProCoat 58-8230DD Chemical Resistant Gloves, PVC Coated — PIP · Material: PVC · Length: 12 in · Lining: Jersey · Grip: Sandy
- PIP XtraTuff 58-8656 Chemical Resistant Gloves, PVC Coated, 12" — PIP · Material: PVC · Length: 12 in · Lining: Interlock · Grip: Rough · EN 374: AJKL · Standards: 21 CFR
- PIP XtraTuff 58-8658DL Chemical Resistant Gloves, PVC Coated — PIP · Material: PVC · Length: 12 in · Lining: Acrylic · Grip: Rough
- PIP XtraTuff 58-8658K Chemical Resistant Gloves, ANSI A3 — PIP · Material: PVC · Length: 12 in · Grip: Rough · EN 374: AJK · Standards: ASTM F1060 3
Assurance3 gloves
- Assurance 58-8030DD Chemical Resistant Gloves, PVC Coated, 12" Length — Assurance · Material: PVC · Length: 12 in · Lining: Jersey · Grip: Rough Acid
- Assurance 58-8130DD Chemical Resistant Gloves, PVC Coated — Assurance · Material: PVC · Length: 12 in · Lining: Interlock · Grip: Sandy · EN 374: JKL
- Assurance PowerCoat 660 Chemical Resistant Gloves, PVC Coated, PVC Dipped Glove — Assurance · Material: PVC · Thickness: 35 mil · Length: 12 in · Lining: Interlock · Grip: Rough · EN 374: AKL
MCR Safety3 gloves
- MCR Safety Memphis BlueCoat 6632 Chemical Resistant Gloves, ANSI A1, PVC Coated — MCR Safety · Material: PVC · Length: 12 in
- MCR Safety Memphis PVC 6212S Chemical Resistant Gloves, PVC Coated — MCR Safety · Material: PVC · Length: 12 in
- MCR Safety Predator MG9648 Chemical Resistant Gloves, PVC Coated — MCR Safety · Material: PVC · Length: 12 in
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. A chemical glove is described by the material (nitrile, neoprene, PVC, butyl, natural rubber latex, Viton), its thickness in mil (thousandths of an inch), its length in inches, whether it is lined (flock, cotton, unlined) and its grip finish. Which chemicals it resists, and for how long, is published by the manufacturer per chemical as a breakthrough time; that table is on the manufacturer's spec sheet, not here. The EN 374 mark lists the letter codes of the chemicals the glove was tested against.
Technical. ASTM F739 measures permeation breakthrough time and rate; ASTM D5151 tests for pinholes (AQL); EN ISO 374-1:2016 marks Type A (6 chemicals over 30 min), Type B (3 chemicals) or Type C (1 chemical over 10 min) with the letter codes of the chemicals from the EN 374 list (for example K for sodium hydroxide, J for n-heptane); EN 374-5 covers micro-organisms and viruses. Thickness, length and lining values are the manufacturer's.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
EN ISO 374-1:2016 glove types and chemical letter codes
| Type | Test result |
|---|---|
| Type A | At least 6 listed chemicals, 30 minutes or more breakthrough each |
| Type B | At least 3 listed chemicals, 30 minutes or more |
| Type C | At least 1 listed chemical, 10 minutes or more |
| Code | Chemical | Code | Chemical |
|---|---|---|---|
| A | Methanol | K | Sodium hydroxide 40% |
| B | Acetone | L | Sulphuric acid 96% |
| C | Acetonitrile | M | Nitric acid 65% |
| D | Dichloromethane | N | Acetic acid 99% |
| E | Carbon disulphide | O | Ammonia 25% |
| F | Toluene | P | Hydrogen peroxide 30% |
| G | Diethylamine | S | Hydrofluoric acid 40% |
| H | Tetrahydrofuran | T | Formaldehyde 37% |
| I | Ethyl acetate | ||
| J | n-Heptane |
Source: EN ISO 374-1:2016. US permeation testing: ASTM F739; pinhole AQL: ASTM D5151. Breakthrough times per chemical are on each manufacturer's spec sheet.