3M Face Shields
12 face shields from 3M, listed with what 3M publishes, and live prices.
Pick a lens tint, coating, frame style or z87 mark; the list below narrows as you choose. Prices are live.
12 products
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
3M12 products
- 3M H18 Face Shields, Cap Mount Hard Hat Headgear Thermoplastic — 3M
- 3M H24M Face Shields, Headgear For Hard Hat Aluminum, Blue — 3M
- 3M H8A Face Shields, Ratchet Headgear Blue, 9 in L x 6 in H — 3M
- 3M H8A Face Shields, Ratchet Headgear, Uncoated — 3M · Standards: ANSI Z87.1+
- 3M Speedglas 9100 Face Shields, FX-Air Wide-View Grinding — 3M · Lens tint: Clear
- 3M Total Performance Faceshields — 3M · Lens tint: Clear
- 3M Versaflo M-925 Face Shields, Standard Visor Uncoated, Clear — 3M
- 3M W96 Clear Polycarbonate Faceshield, Uncoated — 3M
- 3M W96 Clear Propionate Faceshield Uncoated — 3M · Lens tint: Clear
- 3M W96IR5 Faceshield Window Shade 5, Uncoated — 3M
- 3M WP96 Dark Green Polycarbonate Faceshield — 3M
- 3M WP98 Faceshield Uncoated, Clear — 3M
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. Safety eyewear is marked by the manufacturer under ANSI/ISEA Z87.1. Z87 on the lens and frame means it passed the basic impact tests; Z87+ means it passed the high-impact tests (a quarter-inch steel ball at 150 feet per second for spectacles). Lens tint is about light, not impact: clear for indoors, gray or smoke for sun, indoor/outdoor and mirror tints for moving between the two, amber for low light. Anti-fog and hard (scratch-resistant) coatings are named by the manufacturer. Goggles add a seal around the eyes; face shields are worn over spectacles or goggles, not instead of them.
Technical. ANSI/ISEA Z87.1-2020 (and the 2015 edition still on many labels) marks: Z87 basic impact, Z87+ high impact, D3 splash and droplet, D4 dust, D5 fine dust, W plus a shade number for welding filters, U plus a scale number for UV, L plus a number for visible-light filters, R for infrared, H for head sizes smaller than average. CSA Z94.3 is the Canadian equivalent, EN 166 the European mark (F, B, A for impact grades). Each mark shown on this page is the one the manufacturer publishes for that product.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
ANSI/ISEA Z87.1 lens and frame marks
| Mark | Meaning |
|---|---|
| Z87 | Basic impact |
| Z87+ | High impact (spectacles: quarter-inch steel ball at 150 ft/s) |
| D3 | Splash and droplet |
| D4 | Dust |
| D5 | Fine dust |
| W + number | Welding filter, shade number |
| U + number | UV filter, scale number |
| L + number | Visible light filter, scale number |
| R | Infrared filter |
| H | Sized for smaller heads |
Source: ANSI/ISEA Z87.1-2020, American National Standard for Occupational and Educational Personal Eye and Face Protection Devices.