Skip to main content
Eye Protection Finder · 762 products, every brand we carry

MCR Safety Safety Glasses

96 Safety glasses from MCR Safety, listed with what MCR Safety publishes, and live prices.

Pick a lens tint, coating, frame style or z87 mark; the list below narrows as you choose. Prices are live.

MCR Safety 28550 Safety Glasses, Welding Goggle, 50mm Stationary Round Lens
By type
Safety Glasses (422)Face Shields (190)Safety Goggles (75)
By lens tint and type
Clear Safety Glasses (58)Clear Face Shields (40)Clear Safety Goggles (27)Gray Safety Glasses (21)Clear; Smoke Safety Glasses (20)Clear; Indoor/Outdoor; Smoke Safety Glasses (16)Clear; Gray Safety Glasses (14)
By coating and type
Anti-Fog Safety Glasses (46)Mirror Safety Glasses (19)Anti-Fog Safety Goggles (18)Anti-Fog; Mirror Safety Glasses (17)Anti-Fog; Anti-Scratch Safety Glasses (11)Duramass Hard Coat; UV-AF Anti-Fog Safety Glasses (11)Hard Coat Safety Glasses (9)
By frame style
Rimless Safety Eyewear (29)Semi-Rimless Safety Eyewear (20)Over-The-Glass Safety Eyewear (14)Wraparound; Frameless / Rimless Safety Eyewear (13)Wraparound; Full Frame Safety Eyewear (10)Foam-Lined Safety Eyewear (10)Wraparound Safety Eyewear (9)

96 products

Ratings and specifications are as published by each manufacturer. Tap a group to open it.

MCR Safety96 products

Open the MCR Safety page

Do not see what you need? Browse the category or call (925) 215-7337.

In plain words. Safety eyewear is marked by the manufacturer under ANSI/ISEA Z87.1. Z87 on the lens and frame means it passed the basic impact tests; Z87+ means it passed the high-impact tests (a quarter-inch steel ball at 150 feet per second for spectacles). Lens tint is about light, not impact: clear for indoors, gray or smoke for sun, indoor/outdoor and mirror tints for moving between the two, amber for low light. Anti-fog and hard (scratch-resistant) coatings are named by the manufacturer. Goggles add a seal around the eyes; face shields are worn over spectacles or goggles, not instead of them.

Technical. ANSI/ISEA Z87.1-2020 (and the 2015 edition still on many labels) marks: Z87 basic impact, Z87+ high impact, D3 splash and droplet, D4 dust, D5 fine dust, W plus a shade number for welding filters, U plus a scale number for UV, L plus a number for visible-light filters, R for infrared, H for head sizes smaller than average. CSA Z94.3 is the Canadian equivalent, EN 166 the European mark (F, B, A for impact grades). Each mark shown on this page is the one the manufacturer publishes for that product.

Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.

The standard at a glance

Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.

ANSI/ISEA Z87.1 lens and frame marks
MarkMeaning
Z87Basic impact
Z87+High impact (spectacles: quarter-inch steel ball at 150 ft/s)
D3Splash and droplet
D4Dust
D5Fine dust
W + numberWelding filter, shade number
U + numberUV filter, scale number
L + numberVisible light filter, scale number
RInfrared filter
HSized for smaller heads

Source: ANSI/ISEA Z87.1-2020, American National Standard for Occupational and Educational Personal Eye and Face Protection Devices.

Need help choosing?Call us with the job and the hazard; we will point you at the products the manufacturers rate for it.
Call (925) 215-7337
!
Corporate AccountsContract pricing and inventory management available.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.