First Aid Only Burn Care
8 burn care from First Aid Only, listed with what First Aid Only publishes, and live prices.
Pick a ansi class, ansi type or case; the list below narrows as you choose. Prices are live.
8 products
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
First Aid Only8 products
- First Aid Only 16-00 Burn Care, Burn Dressing, 1 per Box — First Aid Only
- First Aid Only 3630-1 Burn Care, 36"x30" WaterJel Burn Wrap Canister, Case of 4 — First Aid Only
- First Aid Only 440-O/FAO 1 Person Bullk Plastic Burn Care Kit — First Aid Only · People: 1 person · Standards: OSHA
- First Aid Only 7260-1 Burn Care, 1 Water Jel Heat Shield Fire Extinguishing — First Aid Only
- First Aid Only 91264 Burn Care, Enhanced Burn Kit — First Aid Only · Standards: OSHA
- First Aid Only 9131 Burn Care, Burn Dressing — First Aid Only
- First Aid Only 9672-1 Burn Care, 96"x72" WaterJel Heat Shield Blanket, Case of 4 — First Aid Only
- First Aid Only FAO-3030 Burn Care, Small Fabric Burn Kit, 7 Pieces — First Aid Only · Standards: OSHA
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. Workplace first aid kits are labelled under ANSI/ISEA Z308.1 by Class and Type. Class A kits carry the basic supplies for common injuries; Class B kits carry more of each item plus extra items for larger or higher-risk workplaces. The Type says what the case is built for: Type I mounted indoors, Type II portable indoors, Type III portable and water-resistant for indoor or outdoor use, Type IV portable and waterproof for rough outdoor use. Refills are matched to the kit the manufacturer lists them for.
Technical. ANSI/ISEA Z308.1-2021 lists minimum contents by class (for example 16 adhesive bandages, 1 absorbent compress and 2 trauma pads for Class A; 50 adhesive bandages, 2 absorbent compresses, 4 trauma pads and a tourniquet for Class B) and tests the container for Types I–IV (mounting, portability, water resistance, impact). OSHA 29 CFR 1910.151 requires readily available first aid supplies and references Z308.1 as a guide. Eyewash stations are built to ANSI/ISEA Z358.1 (15-minute flush).
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
ANSI/ISEA Z308.1 kit classes and container types
| Class | Intended for |
|---|---|
| Class A | The most common workplace injuries; the basic assortment |
| Class B | A broader range and quantity of supplies for more complex or higher-risk environments |
| Type | Container |
|---|---|
| Type I | Mounted, indoor use |
| Type II | Portable, indoor use |
| Type III | Portable, indoor or outdoor, water-resistant |
| Type IV | Portable, indoor or outdoor, waterproof, impact-tested |
Source: ANSI/ISEA Z308.1-2021, Minimum Requirements for Workplace First Aid Kits and Supplies. OSHA 29 CFR 1910.151 references it as a guide. Eyewash stations: ANSI/ISEA Z358.1 (15-minute flush).