Skip to main content
Hard Hat Finder · 193 products, every brand we carry

JSP Hard Hats

15 hard hats from JSP, listed with what JSP publishes, and live prices.

Pick a ansi type, electrical class, brim or vents; the list below narrows as you choose. Prices are live.

JSP EVO VISTAlens 280-EVLN Hard Hats, Type I
By type
Hard Hats (106)Safety Helmets (61)Bump Caps (26)
By ansi type
ANSI Z89.1 Type I Hard Hats (90)ANSI Z89.1 Type II Hard Hats (50)
By electrical class
ANSI Z89.1 Class E Hard Hats (75)ANSI Z89.1 Class C Hard Hats (67)
By brim and type
Cap Style Hard Hats (41)Full Brim Hard Hats (36)Cap Style Bump Caps (24)Full Brim Safety Helmets (19)Cap Style Safety Helmets (19)
By vents
Vented Hard Hats (41)Non-Vented Hard Hats (27)

15 products

Ratings and specifications are as published by each manufacturer. Tap a group to open it.

JSP15 products

Open the JSP page

Do not see what you need? Browse the category or call (925) 215-7337.

In plain words. Hard hats are marked under ANSI/ISEA Z89.1. Type I protects against a blow to the top of the head; Type II also protects against blows from the side, front and back. The electrical class is separate: Class G (general) is tested to 2,200 volts, Class E (electrical) to 20,000 volts, Class C (conductive) is not tested for electrical protection and may be vented. Bump caps are not hard hats; they protect against bumps and scrapes only. The manufacturer prints the Type and Class inside the shell.

Technical. ANSI/ISEA Z89.1-2014 (R2019): Type I impact and penetration from above; Type II adds lateral impact (EN 12492 climbing-style helmets are tested similarly and are sold here where the manufacturer rates them to Z89.1 Type II); Class G 2,200 V, Class E 20,000 V, Class C no electrical rating; optional marks LT (low temperature, −30 °C), HV (high visibility), and the reverse-donning arrow. CSA Z94.1 is the Canadian equivalent. Suspension points, ratchet or pin-lock adjustment, brim style and vents are as published.

Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.

The standard at a glance

Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.

ANSI/ISEA Z89.1 types and classes
MarkWhat it means in the standard
Type IImpact and penetration protection from a blow to the top of the head
Type IIType I plus lateral impact (front, back and sides)
Class G (General)Tested at 2,200 volts
Class E (Electrical)Tested at 20,000 volts
Class C (Conductive)No electrical protection; may be vented
LTLow-temperature tested (−30 °C)
HVHigh-visibility shell
Reverse-donning arrowTested worn backwards

Source: ANSI/ISEA Z89.1-2014 (R2019), American National Standard for Industrial Head Protection. Bump caps are not covered by Z89.1.

Need help choosing?Call us with the job and the hazard; we will point you at the products the manufacturers rate for it.
Call (925) 215-7337
!
How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.