Skip to main content
Hard Hat Finder · 193 products, every brand we carry

Hard Hat Finder

193 hard hats, helmets and bump caps from every brand we carry, in one list with live prices. Pick a type, a rating or a brand; every selection is its own page.

Pick a type, ansi type, electrical class, brim, brand or vents; the list below narrows as you choose. Prices are live.

PIP 280-HP940 Bump Cap, 4-Point Plastic Suspension and Pin-Lock Adjustable Back

193 products

Ratings and specifications are as published by each manufacturer. Tap a group to open it.

Z89.1 Type I, Class C21 products

Open the Z89.1 Type I, Class C page

Z89.1 Type I, Class E40 products

Open the Z89.1 Type I, Class E page

Z89.1 Type I, Class E & Class G2 products

Open the Z89.1 Type I, Class E & Class G page

Z89.1 Type I, Class G7 products

Open the Z89.1 Type I, Class G page

Z89.1 Type II, Class C24 products

Open the Z89.1 Type II, Class C page

Z89.1 Type II, Class E25 products

Open the Z89.1 Type II, Class E page

Z89.1 Type I, class not stated6 products

Open the Z89.1 Type I, class not stated page

Bump Caps, rating not stated26 products

Open the Bump Caps, rating not stated page

Hard Hats, rating not stated19 products

Open the Hard Hats, rating not stated page

Safety Helmets, rating not stated8 products

Open the Safety Helmets, rating not stated page

Z89.1 Class C, type not stated15 products

Open the Z89.1 Class C, type not stated page

Do not see what you need? Browse the category or call (925) 215-7337.

Browse by type

Hard Hats (106)Safety Helmets (61)Bump Caps (26)

Browse by ansi type

ANSI Z89.1 Type I Hard Hats (76)ANSI Z89.1 Type II Hard Hats (49)

Browse by electrical class

ANSI Z89.1 Class E Hard Hats (65)ANSI Z89.1 Class C Hard Hats (60)

Browse by brim and type

Cap Style Hard Hats (38)Full Brim Hard Hats (36)Cap Style Bump Caps (24)Full Brim Safety Helmets (19)Cap Style Safety Helmets (17)

Browse by brand and type

PIP Hard Hats (25)PIP Safety Helmets (17)JSP Hard Hats (15)Liberty Safety Hard Hats (15)JSP Bump Caps (13)MSA Hard Hats (13)Fibre-Metal Hard Hats (10)Studson Safety Helmets (10)JSP Safety Helmets (9)Portwest Safety Helmets (8)Portwest Hard Hats (8)

Browse by vents

Vented Hard Hats (41)Non-Vented Hard Hats (27)

In plain words. Hard hats are marked under ANSI/ISEA Z89.1. Type I protects against a blow to the top of the head; Type II also protects against blows from the side, front and back. The electrical class is separate: Class G (general) is tested to 2,200 volts, Class E (electrical) to 20,000 volts, Class C (conductive) is not tested for electrical protection and may be vented. Bump caps are not hard hats; they protect against bumps and scrapes only. The manufacturer prints the Type and Class inside the shell.

Technical. ANSI/ISEA Z89.1-2014 (R2019): Type I impact and penetration from above; Type II adds lateral impact (EN 12492 climbing-style helmets are tested similarly and are sold here where the manufacturer rates them to Z89.1 Type II); Class G 2,200 V, Class E 20,000 V, Class C no electrical rating; optional marks LT (low temperature, −30 °C), HV (high visibility), and the reverse-donning arrow. CSA Z94.1 is the Canadian equivalent. Suspension points, ratchet or pin-lock adjustment, brim style and vents are as published.

Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.

The standard at a glance

Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.

ANSI/ISEA Z89.1 types and classes
MarkWhat it means in the standard
Type IImpact and penetration protection from a blow to the top of the head
Type IIType I plus lateral impact (front, back and sides)
Class G (General)Tested at 2,200 volts
Class E (Electrical)Tested at 20,000 volts
Class C (Conductive)No electrical protection; may be vented
LTLow-temperature tested (−30 °C)
HVHigh-visibility shell
Reverse-donning arrowTested worn backwards

Source: ANSI/ISEA Z89.1-2014 (R2019), American National Standard for Industrial Head Protection. Bump caps are not covered by Z89.1.

Need help choosing?Call us with the job and the hazard; we will point you at the products the manufacturers rate for it.
Call (925) 215-7337
!
Corporate AccountsContract pricing and inventory management available.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.