Description
The Chicago Pneumatic CP7120 works two ways: as a needle scaler that takes 19 needles of 1/8 in (3 mm), and as a chipping hammer that takes a 1.37 in (35 mm) chisel. It runs at 4,800 blows per minute.
- Two tools in one: needle scaler and chipping hammer
- 4,800 blows per minute with a 1.12 in stroke
- Needle capacity 19 x 1/8 in (3 mm); square 1/2 in chisel shank
- Uses 15 cfm at load; 1/4 in air inlet
- 6.17 lb, 17.99 in long
Manufacturer item number: 8941071200 (CP7120).
Specifications
Type: Needle Scaler; Chisel Hammer
Handle Type: In-Line
Cycle Rate: 4800 blows/min
Stroke Length: 1.12 in
Air Consumption @ Load: 15 CFM
Air Inlet: 1/4 in
Needle Capacity: 19 x 1/8 in (3 mm)
Chisel Shank: 1/2 in square
Weight: 6.17 lb
Length: 17.99 in
