Description
Ingersoll Rand 170PG is a pneumatic scaler. Type Needle Scaler; handle type Pistol Grip; cycle rate 3000 blows/min. Ingersoll Rand lists 3,000 blows per minute, 1.40 in (35 mm) piston stroke, 0.93 in bore; Pistol grip with a rubber overmold and low vibration for longer use; Uses 5.5 cfm at load; 1/4 in NPT air inlet, 5/16 in minimum hose; 6.62 lb without chisel, 12.4 in long.
Ingersoll Rand 170PG specifications
| Item | Ingersoll Rand data |
|---|---|
| Part number | 170PG |
| Type | Needle Scaler |
| Handle Type | Pistol Grip |
| Cycle Rate | 3000 blows/min |
| Stroke Length | 1.40 in |
| Bore Diameter | 0.93 in |
| Air Consumption @ Load | 5.5 CFM |
| Air Inlet | 1/4 in NPT |
| Hose Size (min) | 5/16 in |
| Weight | 6.62 lb |
| Length | 12.4 in |
Source: Ingersoll Rand published product data.
The Ingersoll Rand 170PG is a pistol-grip air needle scaler for removing rust, scale, old paint and weld slag. It runs at 3,000 blows per minute with a 1.40 in piston stroke.
- 3,000 blows per minute, 1.40 in (35 mm) piston stroke, 0.93 in bore
- Pistol grip with a rubber overmold and low vibration for longer use
- Uses 5.5 cfm at load; 1/4 in NPT air inlet, 5/16 in minimum hose
- 6.62 lb without chisel, 12.4 in long
Manufacturer item number: 170PG.
