Description
Ingersoll Rand 172LNA1 is a pneumatic scaler. Type Needle Scaler; handle type In-Line; control type Lever. Ingersoll Rand lists 5,500 blows per minute, 0.56 in (14 mm) piston stroke, 0.94 in bore; Adjustable bayonet-type needle housing lock; no special tools needed; Rubber-faced throttle valve seals the internal parts; strengthened head block; Uses 12 cfm at load; 1/4 in NPT air inlet, 5/16 in minimum hose.
Ingersoll Rand 172LNA1 specifications
| Item | Ingersoll Rand data |
|---|---|
| Part number | 172LNA1 |
| Type | Needle Scaler |
| Handle Type | In-Line |
| Control Type | Lever |
| Cycle Rate | 5500 blows/min |
| Stroke Length | 0.56 in |
| Bore Diameter | 0.94 in |
| Air Consumption @ Load | 12 CFM |
| Air Inlet | 1/4 in NPT |
| Hose Size (min) | 5/16 in |
| Weight | 5.25 lb |
| Length | 13.75 in |
Source: Ingersoll Rand published product data.
The Ingersoll Rand 172LNA1 is an in-line air needle scaler with a lever throttle, built for surface preparation on steel, castings and welds. It runs at 5,500 blows per minute in a compact, well-balanced body.
- 5,500 blows per minute, 0.56 in (14 mm) piston stroke, 0.94 in bore
- Adjustable bayonet-type needle housing lock; no special tools needed
- Rubber-faced throttle valve seals the internal parts; strengthened head block
- Uses 12 cfm at load; 1/4 in NPT air inlet, 5/16 in minimum hose
- 5.25 lb without chisel, 13.75 in long
Manufacturer item number: 172LNA1.
