Skip to main content
Spill Control Finder · 128 products, every brand we carry

Spill Control Finder

128 spill control products from every brand we carry, in one list with live prices. Pick a type, a rating or a brand; every selection is its own page.

Pick a category, sorbent type, form or brand; the list below narrows as you choose. Prices are live.

3M 144 High-Capacity Petroleum Sorbent Roll, Absorbs 73 gal, 38 in x ft

128 products

Ratings and specifications are as published by each manufacturer. Tap a group to open it.

Universal sorbents16 products

Open the Universal sorbents page

Oil-only sorbents10 products

Open the Oil-only sorbents page

Hazmat / chemical sorbents7 products
Sorbents34 products

Open the Sorbents page

Sorbent Kits27 products

Open the Sorbent Kits page

Pallets16 products

Open the Pallets page

Berms12 products

Open the Berms page

Drain Protection6 products

Do not see what you need? Browse the category or call (925) 215-7337.

In plain words. Spill control products are described by what they soak up and what shape they come in. Universal (grey) sorbents take up oils, water-based liquids and most chemicals; oil-only (white) sorbents float and take up oil and fuel but repel water, for use on water or in rain; hazmat (yellow or pink) sorbents are for aggressive chemicals such as acids and caustics. Forms are pads, rolls, socks, pillows and booms, plus kits that bundle them with disposal bags; capacity is the manufacturer's stated volume absorbed per pad, bale or kit. Containment pallets and berms hold drums and leaks under them.

Technical. Sorbent capacity is published by the manufacturer per unit (gallons per pad, bale or kit) and is not standardised across brands; ASTM F726 describes a sorbent performance test some manufacturers cite. Spill pallets are sized to EPA 40 CFR 264.175 secondary containment (the larger of 10% of total volume or the volume of the largest container); SPCC rules under 40 CFR 112 apply to oil storage. Colour coding (grey, white, yellow) is a convention, not a standard. Values shown are the manufacturer's.

Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.

The standard at a glance

Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.

Secondary containment sizing (EPA)
RuleRequirement
40 CFR 264.175 (hazardous waste container storage)Containment capacity at least the larger of 10% of the total volume of all containers or the volume of the largest container
40 CFR 112 (SPCC)Spill prevention, control and countermeasure plans for oil storage above the threshold quantities

Source: EPA 40 CFR 264.175 and 40 CFR 112. Sorbent capacities are the manufacturer's per-unit figures; ASTM F726 is the sorbent test some manufacturers cite. Colour coding (grey, white, yellow) is a trade convention, not a standard.

Need help choosing?Call us with the job and the hazard; we will point you at the products the manufacturers rate for it.
Call (925) 215-7337
Corporate AccountsContract pricing and inventory management available.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.