Dunlop steel toe waders
All the Dunlop steel toe waders we stock, with prices and add to cart: 2 listings, 7 part numbers (one per US size). Sold by the pair (one pair) as marked on each line. Figures are as Dunlop publishes them on its US product pages and specification sheets. Ships in 1–2 business days; most orders arrive in 3–7 business days.
Steel toe waders: every part number
Source: Dunlop Protective Footwear US product pages (dunlopboots.com/us; the Specifications table and feature bullets as printed) and specification sheets; manufacturer product data; prices are ours.
Steel toe waders family data
| Specification | Dunlop |
|---|---|
| Family | Steel toe waders |
| Styles | 8605600, 8606700 |
| Part numbers | 8605600.09, 8605600.10, 8605600.11, 8605600.12, 8606700.10, 8606700.11, 8606700.12 |
| Standards as the manufacturer prints them | ASTM F2413-11 M I/75 C/75 SD |
| Materials | PVC |
| Toe caps | Steel |
| Colors | Black |
| US sizes | 9, 10, 11, 12 |
| Sell units | pair (one pair) |
| Country of origin | USA |
Source: Dunlop Protective Footwear US product pages (dunlopboots.com/us; the Specifications table and feature bullets as printed) and specification sheets; manufacturer product data.
Steel toe waders, as Dunlop describes them
Dunlop 8605600 Steel Toe Hip Waders, PVC, ASTM F2413 SD, Black, Sizes 9 to 12: Hip Wader Black Steel Toe. Locks out water and resists oil and gas, grease.
Dunlop 8606700 Steel Toe Chest Waders, PVC, ASTM F2413 SD, Black, Sizes 10 to 12: Chest Wader Black Steel Toe. waterproof protection that resists oil and gas, grease, and saltwater in every condition.
Feature bullets the manufacturer prints: Cleated outsole for traction clogging prevention in wet or muddy terrain. Hip high lightweight PVC upper with non absorbent lining provides flexibility and comfort. Steel toe listed to ASTM F2413-11. Chest high Durable heavy PVC upper with non absorbent lining provides flexibility and comfort.
Source: Dunlop product pages (titles, taglines and feature bullets as printed); wording is the manufacturer's, its marketing words dropped.
Safe use
29 CFR 1910.136(a): the employer shall ensure that each affected employee uses protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects, or objects piercing the sole, or when the use of protective footwear will protect the affected employee from an electrical hazard, such as a static-discharge or electric-shock hazard, that remains after the employer takes other necessary protective measures. 29 CFR 1910.136(b)(1), condensed: protective footwear must meet any of the following consensus standards: ASTM F-2412-2005 and ASTM F-2413-2005, ANSI Z41-1999, or ANSI Z41-1991 (incorporated by reference in 1910.6); 1910.136(b)(2): protective footwear that the employer demonstrates is at least as effective as footwear constructed to one of those standards is deemed to meet the section.
ASTM F2413 is the standard the manufacturer prints on the steel toe of this wader (the edition as printed); its marks read M men's sizing, I/75 impact and C/75 compression resistance of the toe cap, SD static dissipative. A wader is footwear and a garment in one: the toe cap carries the rating; the upper is PVC the manufacturer prints as waterproof. The standard is licensed and is not quoted here.
Source: OSHA 29 CFR and Cal/OSHA Title 8 as published on ecfr.gov and dir.ca.gov, read Nov 19 2026; each item page carries the paragraphs for its product.
Steel toe waders documents
- Dunlop product page: Hip Wader Black Steel Toe
- Dunlop Specification Sheet: Hip Wader Black Steel Toe (PDF)
- Dunlop product page: Chest Wader Black Steel Toe
- Dunlop Specification Sheet: Chest Wader Black Steel Toe (PDF)
- Dunlop declarations of conformity page
- Dunlop Protective Footwear US site
Source: Dunlop product pages; each item page links its own.
Dunlop steel toe waders questions
Which Dunlop steel toe waders do you stock? Dunlop 8605600 Steel Toe Hip Waders, PVC, ASTM F2413 SD, Black, Sizes 9 to 12, Dunlop 8606700 Steel Toe Chest Waders, PVC, ASTM F2413 SD, Black, Sizes 10 to 12.
Which styles and part numbers are these? 8605600: 4 sizes, 8606700: 3 sizes; the part number on each line is the style code plus the US size.
Which standards does the manufacturer print here? ASTM F2413-11 M I/75 C/75 SD, as printed on each product page; the standards are licensed and not quoted.
How are they sold? By the pair (one pair) as marked on each line; the price on the line is for that unit.
Where do the figures come from? From the Dunlop Protective Footwear US product pages (the Specifications table and feature bullets as printed), its specification sheets and the manufacturer product data; each product page cites its source under every table.
Do you ship nationwide? Yes. Ships in 1–2 business days; most orders arrive in 3–7 business days.





