Jackson Safety welding helmet safety plates
Every Jackson Safety welding helmet safety plates listing we stock, with its price and add to cart: 2 listings, 2 part numbers (16073 and 16078). Figures are as Jackson Safety (SureWerx) publishes them. Ships in 1–2 business days; most orders arrive in 3–7 business days.
Welding helmet safety plates: every part number
| Part number | As the manufacturer titles it | Standards | Sold by | Price | ||
|---|---|---|---|---|---|---|
![]() | 16073 | Safety Outer Plates - Polycarbonate - 2 in. x 4.25 in. | CSA Z94.3, ANSI Z87.1 | Each | $9.49 | |
![]() | 16078 | Safety Outer Plates - Polycarbonate -5.25 in. x 4.5 in. | ANSI Z87.1 | Each | $11.99 |
Source: Jackson Safety (SureWerx) product pages on jacksonsafety.com (Technical Specifications as printed); manufacturer product data; prices are ours.
Welding helmet safety plates family data
| Specification | Jackson Safety |
|---|---|
| Family | Welding helmet safety plates |
| Part numbers | 16073, 16078 |
| Standards | CSA Z94.3, ANSI Z87.1; ANSI Z87.1 |
| Sell units | Each |
| Country of origin | Vietnam |
Source: Jackson Safety (SureWerx) product pages on jacksonsafety.com (Technical Specifications as printed); manufacturer product data.
Welding helmet safety plates, as Jackson Safety (SureWerx) describes them
Jackson Safety lists its polycarbonate safety outer plates by size: 2 x 4.25 in. for the 2 x 4 passive shells and 5.25 x 4.5 in. for the HSL, HLX and Huntsman 4.5 x 5.25 shells; 1910.252(b)(2)(ii)(C) calls for filter and cover plates designed for easy removal.
Replacement safety plates are made of high impact and lightweight, clear, polycarbonate material. Designed to prevent surface damage to filter plates and lenses, these replacement plates are compatible with a variety of Jackson Safety welding helmets.
Source: Jackson Safety (SureWerx) product pages; wording is the manufacturer's, summarized in the first paragraph.
Welding eye protection rules
29 CFR 1910.252(b)(2)(i)(A): helmets or hand shields shall be used during all arc welding or arc cutting operations, excluding submerged arc welding; (B): goggles or other suitable eye protection during all gas welding or oxygen cutting; (ii)(A): helmets and hand shields shall be made of a material which is an insulator for heat and electricity, not readily flammable; (B): arranged to protect the face, neck and ears from direct radiant energy from the arc; (C): helmets shall be provided with filter plates and cover plates designed for easy removal; (G): lenses shall bear a permanent distinctive marking by which the source and shade may be identified; (I): filter lenses must meet the transmission test of a consensus standard listed in 1910.133(b)(1). 29 CFR 1910.133(a)(5): the employer shall ensure that each affected employee uses equipment with filter lenses that have a shade number appropriate for the work; its table lists the minimum protective shade by operation and arc current (shielded metal arc 7 to 11 by amperage, gas metal and flux cored arc 7 to 10, gas tungsten arc 8 to 10, plasma arc cutting 8 to 10, torch brazing 3, torch soldering 2, gas welding 4 to 6 and oxygen cutting 3 to 5 by plate thickness), with the rule of thumb to start with a shade too dark to see the weld zone and go lighter without going below the minimum. 1926.102(b)(1) carries the same table for construction. ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes (American Welding Society), is the consensus standard the welding trade names for eye, face and body protection in welding; it is named here, not quoted.
Source: OSHA 29 CFR 1910.252(b)(2), 1910.133(a)(5) and 1926.102(b)(1) as published on eCFR; ANSI Z49.1 and Z87.1 named, not quoted.
Welding helmet safety plates documents
Source: Jackson Safety (SureWerx) literature; each item page links its own documents.
Jackson Safety welding helmet safety plates questions
Which Jackson Safety welding helmet safety plates do you stock? Jackson Safety 16073 Safety Outer Plate, Polycarbonate, 2 x 4.25 in, Jackson Safety 16078 Safety Outer Plate, Polycarbonate, 5.25 x 4.5 in.
Which part numbers are these? 16073, 16078; the part number is on each line.
How are they sold? By the each as marked on each line; the price on the line is for that unit.
Where do the figures come from? From the Jackson Safety (SureWerx) product pages (Technical Specifications as printed) and the manufacturer product data; each product page cites its source under every table.
Do you ship nationwide? Yes. Ships in 1–2 business days; most orders arrive in 3–7 business days.


