North Butyl
9 butyl from North, listed with what North publishes, and live prices.
Pick a length, thickness or lining; the list below narrows as you choose. Prices are live.
9 gloves
Ratings and specifications are as published by each manufacturer. Tap a group to open it.
North9 gloves
- North 10B1532A/9Q Chemical Resistant Gloves, 15 Mil Butyl Glovebox Glove, 32" — North · Material: Butyl · Thickness: 15 mil · Length: 32 in · Grip: Smooth · Standards: OSHA 29 CFR 1915.157, CE: EN 420, EN 388, EN 374-1:2003, EN 374-2:2003, 21 CFR 177 (USDA/FDA food contact), physical properties per ASTM D412
- North Butyl B131 Chemical Resistant Gloves, 13 Mil Rubber Glove, Smooth Grip — North · Material: Butyl · Thickness: 13 mil · Length: 11 in · Lining: Unlined · Grip: Smooth · EN 374: Bacteria and Fungi · Standards: EN 388:2016 2000X, EN ISO 374-1:2016 Type A (A, B, C, I, K, L: methanol, acetone, acetonitrile, ethyl acetate, sodium hydroxide 40%, sulphuric acid 96%), PPE Category 3
- North Butyl B131R Chemical Resistant Gloves, 13 Mil Rubber Glove, Rough Grip — North · Material: Butyl · Thickness: 13 mil · Length: 11 in · Lining: Unlined · Grip: Rough · EN 374: Bacteria and Fungi · Standards: EN 388:2016 2000X, EN ISO 374-1:2016 Type A (A, B, C, I, K, L: methanol, acetone, acetonitrile, ethyl acetate, sodium hydroxide 40%, sulphuric acid 96%), PPE Category 3
- North Butyl B144RGI Chemical Resistant Gloves, 14 Mil Rubber Glove, Rough Grip — North · Material: Butyl · Thickness: 14 mil · Length: 14 in · Lining: Unlined · Grip: Rough · Standards: OSHA 29 CFR 1915.157, ANSI/ISEA 105 (ASTM D3389-05, ASTM F1790-97), EN 374, EN 388, EN 420
- North Butyl B161 Chemical Resistant Gloves, 16 Mil Rubber Glove, Smooth Grip — North · Material: Butyl · Thickness: 16 mil · Length: 11 in · Lining: Unlined · Grip: Smooth
- North Butyl B161R Chemical Resistant Gloves, 16 Mil Rubber Glove, Rough Grip — North · Material: Butyl · Thickness: 16 mil · Length: 11 in · Lining: Unlined · Grip: Smooth
- North Butyl B174R Chemical Resistant Gloves, 17 Mil Rubber Glove, Rough Grip — North · Material: Butyl · Thickness: 17 mil · Length: 14 in · Lining: Unlined · Grip: Rough
- North Butyl B324R Chemical Resistant Gloves, 32 Mil Rubber Glove, Rough Grip — North · Material: Butyl · Thickness: 32 mil · Length: 14 in · Lining: Unlined · Grip: Rough
- North Butyl Chemical Resistant Gloves, 13 Mil Rubber Glove, Smooth Grip — North · Material: Butyl · Thickness: 13 mil · Length: 11 in · Lining: Unlined · Grip: Smooth · EN 374: Bacteria and Fungi · Standards: EN 388:2016 2000X, EN ISO 374-1:2016 Type A (A, B, C, I, K, L: methanol, acetone, acetonitrile, ethyl acetate, sodium hydroxide 40%, sulphuric acid 96%), PPE Category 3
Do not see what you need? Browse the category or call (925) 215-7337.
In plain words. A chemical glove is described by the material (nitrile, neoprene, PVC, butyl, natural rubber latex, Viton), its thickness in mil (thousandths of an inch), its length in inches, whether it is lined (flock, cotton, unlined) and its grip finish. Which chemicals it resists, and for how long, is published by the manufacturer per chemical as a breakthrough time; that table is on the manufacturer's spec sheet, not here. The EN 374 mark lists the letter codes of the chemicals the glove was tested against.
Technical. ASTM F739 measures permeation breakthrough time and rate; ASTM D5151 tests for pinholes (AQL); EN ISO 374-1:2016 marks Type A (6 chemicals over 30 min), Type B (3 chemicals) or Type C (1 chemical over 10 min) with the letter codes of the chemicals from the EN 374 list (for example K for sodium hydroxide, J for n-heptane); EN 374-5 covers micro-organisms and viruses. Thickness, length and lining values are the manufacturer's.
Ratings and specifications on this page are shown as published by the manufacturer or the named standard and describe performance in that standard's test. They are not a recommendation for any task. The employer's hazard assessment decides what protective equipment a job needs. Verify details against the manufacturer's current documentation before you buy.
The standard at a glance
Copied from the named standard or regulation and shown with its source; nothing in these tables is Bayshore's recommendation.
EN ISO 374-1:2016 glove types and chemical letter codes
| Type | Test result |
|---|---|
| Type A | At least 6 listed chemicals, 30 minutes or more breakthrough each |
| Type B | At least 3 listed chemicals, 30 minutes or more |
| Type C | At least 1 listed chemical, 10 minutes or more |
| Code | Chemical | Code | Chemical |
|---|---|---|---|
| A | Methanol | K | Sodium hydroxide 40% |
| B | Acetone | L | Sulphuric acid 96% |
| C | Acetonitrile | M | Nitric acid 65% |
| D | Dichloromethane | N | Acetic acid 99% |
| E | Carbon disulphide | O | Ammonia 25% |
| F | Toluene | P | Hydrogen peroxide 30% |
| G | Diethylamine | S | Hydrofluoric acid 40% |
| H | Tetrahydrofuran | T | Formaldehyde 37% |
| I | Ethyl acetate | ||
| J | n-Heptane |
Source: EN ISO 374-1:2016. US permeation testing: ASTM F739; pinhole AQL: ASTM D5151. Breakthrough times per chemical are on each manufacturer's spec sheet.