Description
Ingersoll Rand 116 is a pneumatic riveting hammer. Type Standard Duty; handle type Pistol Grip; air consumption @ load 15 CFM. Ingersoll Rand lists 2-5/8 in stroke length with an 11/16 in bore diameter; 0.401 in round shank with a spring retainer; 1/4 in air inlet requiring a 3/8 in minimum hose; Runs at 90 psi with 15 CFM air consumption at load.
Ingersoll Rand 116 specifications
| Item | Ingersoll Rand data |
|---|---|
| Part number | 116 |
| Type | Standard Duty |
| Handle Type | Pistol Grip |
| Air Consumption @ Load | 15 CFM |
| Air Consumption | 3 CFM |
| Bore Diameter | 11/16 in |
| Control Type | Trigger |
| Cycle Rate | 3500 blows/min |
| Hose Size (min) | 3/8 in |
| Inlet Size | 1/4 in |
| Pressure | 90 psi |
| Retainer Type | Spring |
| Riveting Capacity | Up to 3500 BPM |
| Shank Diameter | 0.401 in |
| Stroke Length | 2-5/8 in |
| Width | 7.7 in |
| Height | 2.65 in |
Source: Ingersoll Rand published product data.
The Ingersoll Rand 116 is a standard-duty pistol-grip air hammer built for riveting and light chipping work at up to 3,500 blows per minute.
- 2-5/8 in stroke length with an 11/16 in bore diameter
- 0.401 in round shank with a spring retainer
- Trigger throttle rated for accurate, easily controlled operation
- 1/4 in air inlet requiring a 3/8 in minimum hose
- Runs at 90 psi with 15 CFM air consumption at load
Furnished with two retainers, it accepts a wide range of chisels and rivet-set accessories for fabrication and repair work. Manufacturer item number: 116. Sold individually.
