Disposable coverall fabrics · DuPont Tyvek 400 D

DuPont Tyvek 400 D Disposable Protective Clothing

Q: Which DuPont Tyvek 400 D garments does Bayshore Safety carry?

TD127S (DuPont Tyvek D147867 400 D Dual Disposable Coverall, Hood).

Q: What standards does the manufacturer name for DuPont Tyvek 400 D?

Tyvek® - EN 1149 ProShield® 10 - EN 1149. The wording for each is in the standards table above.

Q: Does the manufacturer publish chemical permeation data for DuPont Tyvek 400 D?

No. The published data for DuPont Tyvek 400 D covers physical properties and barrier tests; no chemical permeation table is published for it.

Q: What does the manufacturer warn about DuPont Tyvek 400 D?

Warning: Tyvek® and ProShield® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek® and ProShield® fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. *Intended for use in applications with frontal exposures a

Q: Is this a statement that the garment is compliant for my job?

No. These are the manufacturer's published test results and the standards it names. Under OSHA 29 CFR 1910.132 the employer's hazard assessment decides which protective clothing a task needs.

1 DuPont Tyvek 400 D item we carry (coverall). Manufacturer test data, chemical and barrier results and the standards named on the data sheet.

What DuPont Tyvek 400 D is

DuPont Tyvek 400 D is The garment shall be constructed of DuPont™ Tyvek® 400-- a patented flash-spun polyethylene fabric -- in the front and DuPont™ ProShield® 10 -- a spun-bond, meltblown, sun-bond (SMS) nonwoven in the back.; Tyvek® 400 fabric on the front and hood; DuPont™ ProShield® 10 fabric on the back; ProShield® 10 is made from a polypropylene spunbond-meltblown-spunbond (SMS) fabric; ProShield® 10 fabric has been optimized for comfort, softness and breathability; ProShield® 10 fabric is designed for non-hazardous dry particle and light liquid splash applications. The manufacturer names these applications: Designed for very specific applications where demanding comfort requirements are combined with limited protective requirements for frontal exposures: Wind turbine manufacturing; Composites manufacturing; Boat manufacturing; Remediation; Utilities; Maintenance; Glass manufacturing. Seams: Seam types on the SafeSPEC pages for this family: Serged; Serged or sewn*: A seam produced when three threads are interlocked around the raw edges of two pieces of material for a strong, stress-resistant seam. For potential misting exposure of non-hazardous liquids or particle penetration through th. Shelf life per the manufacturer: What is the shelf life of TYVEK® 400 D garments? There is no established shelf life for Tyvek® 400 D garments.

In the manufacturer's words: "DuPont™ Tyvek® 400 D garments combine the protection, durability and comfort of DuPont™ Tyvek® fabric on the front and the comfort, softness and breathability of DuPont™ ProShield® 10 fabric on the back. The DuPont™ Tyvek® 400 D garments are suitable for applications where comfort requirements are combined with limited protective requirements for frontal exposures. Garments are available in a variety of styles. Applications include fiberglass and composite manufacturing, wind turbines, boat con"

Every DuPont Tyvek 400 D item we carry

	Part number	Item	Seams	Sizes	Case	Price
	TD127S	DuPont Tyvek D147867 400 D Dual Disposable Coverall, Hood	Serged	3XL, 4XL	25 per case	$11.87	Choose size

Prices refresh from the store at the unit shown on the product page. Sized garments open the product page to pick the size.

DuPont Tyvek 400 D physical properties (manufacturer test data)

Test	Method	Result
Thickness	Tyvek® - ASTM D1777 ProShield® 10 - ASTM D1117	5.9 mils 12 mils
Basis Weight	Tyvek® - ASTM D3776 ProShield® 10 - ASTM D3776	1.2 oz/yd2 1.3 oz/yd2
Burst Strength - Mullen	Tyvek® - ASTM D774 ProShield® 10 - ASTM D3786	50 psi 23 psi
Tear Resistance - Trap Tear (MD)	Tyvek® - ASTM D5733 ProShield® 10 - ASTM D5733	6 lbf 4.5 lbf
Tear Resistance - Trap Tear (CD)	Tyvek® - ASTM D5733 ProShield® 10 - ASTM D5733	5 lbf 7 lbf
Breaking Strength - Grab (MD)	Tyvek® - ASTM D5034 ProShield® 10 - ASTM D5034	18 lbf 17 lbf
Breaking Strength - Grab (CD)	Tyvek® - ASTM D5034 ProShield® 10 - ASTM D5034	22 lbf 14 lbf
Hydrostatic Head	Tyvek® - AATCC 127 ProShield® 10 - AATCC 127	45" H^2O 20" H^2O
Surface Resistivity (23°C / 25% RH)	Tyvek® - EN 1149 ProShield® 10 - EN 1149	<2.5 x 10^9 ohms
Wearing Apparel Flammability	Tyvek® - 16 CFR 1610 ProShield® 10 - 16 CRF 1610	Class 1 Class 1

Source: DuPont published data (dupont-tyvek-400-d-td127s-wb-option-cm.html), copied as published. The employer's hazard assessment under OSHA 29 CFR 1910.132 decides what a job needs; these are the manufacturer's test results, not a fitness statement for any task.

DuPont Tyvek 400 D barrier tests

Test	Method	Result
Hydrostatic Head	Tyvek® - AATCC 127 ProShield® 10 - AATCC 127	45" H^2O 20" H^2O

Standards named by the manufacturer for DuPont Tyvek 400 D

Standard	What the manufacturer states
Tyvek® - EN 1149 ProShield® 10 - EN 1149	Surface Resistivity (23°C / 25% RH): <2.5 x 10^9 ohms

Manufacturer limitations and warnings

Warning: Tyvek® and ProShield® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek® and ProShield® fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
*Intended for use in applications with frontal exposures as only the body front, leg front, arms and hood are made with DuPont™ Tyvek® fabric. Portion not comprised of Tyvek® fabric is more breathable and porous.
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®400, Tyvek® 400 D, ProShield®, ProShield® 10, ProShield® 60, Tyvek® 400 FC, and ProShield® 70 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® 500 and Tyvek® 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® 2000 and Tychem® 4000 garments with taped seams. (6)
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation, no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use. Cellosolve® and Selexol™ are registered trademarks of Dow Chemicals Company. Skydrol® is a registered trademark of Solutia.
As of January 2023, all DuPont Personal Protection products are manufactured under specifications that exclude components containing natural rubber latex. Tyvek® 500, Tyvek® 600 and Tyvek® 800 styles made before January 2023 contain natural rubber latex, which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products and should report it to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.

DuPont Tyvek 400 D questions

What is DuPont Tyvek 400 D made of? The garment shall be constructed of DuPont™ Tyvek® 400-- a patented flash-spun polyethylene fabric -- in the front and DuPont™ ProShield® 10 -- a spun-bond, meltblown, sun-bond (SMS) nonwoven in the back.; Tyvek® 400 fabric on the front and hood; DuPont™ ProShield® 10 fabric on the back; ProShield® 10 is made from a polypropylene spunbond-meltblown-spunbond (SMS) fabric; ProShield® 10 fabric has been optimized for comfort, softness and breathability; ProShield® 10 fabric is designed for non-hazardous dry particle and light liquid splash applications

Which DuPont Tyvek 400 D garments does Bayshore Safety carry? TD127S (DuPont Tyvek D147867 400 D Dual Disposable Coverall, Hood).

What standards does the manufacturer name for DuPont Tyvek 400 D? Tyvek® - EN 1149 ProShield® 10 - EN 1149. The wording for each is in the standards table above.

Does the manufacturer publish chemical permeation data for DuPont Tyvek 400 D? No. The published data for DuPont Tyvek 400 D covers physical properties and barrier tests; no chemical permeation table is published for it.

What does the manufacturer warn about DuPont Tyvek 400 D? Warning: Tyvek® and ProShield® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek® and ProShield® fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. *Intended for use in applications with frontal exposures a

Is this a statement that the garment is compliant for my job? No. These are the manufacturer's published test results and the standards it names. Under OSHA 29 CFR 1910.132 the employer's hazard assessment decides which protective clothing a task needs.