International Enviroguard · MicroGuard CE

International Enviroguard MicroGuard CE Disposable Protective Clothing

Q: Which MicroGuard CE garments are available?

CE8013CI (MicroGuard CE Disposable Cleanroom Microporous Coverall, Tunnelized Elastic Wrist and Ankle), CE8019CI (MicroGuard CE Disposable Cleanroom Microporous Coverall with Hood and Boot, Tunnelized Elastic Wrist and Ankle), CE8046CI (MicroGuard CE Disposable Cleanroom Microporous Frock, No Pockets, Tunnelized Elastic Wrist, Bound Mandarin Collar), CE8063CI (MicroGuard CE Disposable Cleanroom Microporous Hood, Elastic Face), CE8065CI (MicroGuard CE Disposable Cleanroom Microporous Sleeves, 18" Length), CE8104CI (MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole), CE8105CI (MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole), CE8106CI (MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole), CE8103CI (MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole).

Q: What standards does the manufacturer name for MicroGuard CE?

Cleanroom Classifications (ISO 14644 class table); BS EN 1149-1:2006; Seam Safety Guide capability chart (Serged Seam Brands). The wording for each is in the standards table above.

Q: Does the manufacturer publish chemical test data for MicroGuard CE?

Yes: 1 table on this page (Liquid & Chemical Testing), copied from the sell sheet. Penetration and repellency classes under ISO 6530 / EN 368 and permeation breakthrough under ASTM F739 are different tests; the guide on permeation versus penetration explains how to read them.

Q: What does the manufacturer warn about MicroGuard CE?

Product Usage Advisory — WARNING: Cleanroom apparel should not be used around heat, flames, sparks, or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.

Q: Is this a statement that the garment is compliant for my job?

No. These are the manufacturer's published test results and the standards it names. Under OSHA 29 CFR 1910.132 the employer's hazard assessment decides which protective clothing a task needs.

9 International Enviroguard MicroGuard CE items (boot covers, coveralls, face hoods, frocks, shoe covers, sleeves). Clean-processed microporous laminate for controlled environments. Manufacturer test data, chemical and barrier results and the standards named on the sell sheet, with live prices by the case.

What MicroGuard CE is

MicroGuard CE is the International Enviroguard fabric family built as low-linting fabric and tunnelized elastic that traps particles; Anti-Static Fabric; Microporous fabric (brand page: 'soft, non-woven fabric with a microporous film'). The manufacturer names these applications: Clean-Processed Cleanroom Clothing; controlled environments, such as cleanroom apparel ... hot or damp, nonhazardous work environments. Seams: Serged Seams.

In the manufacturer's words: "Clean-processed garments that provide superior protection against particulates and non-hazardous liquids. All garments are individually packaged to prevent cross-contamination."

Every MicroGuard CE item we carry

Part number	Item	Seams	Sizes	Per case	Price per case
CE8013CI	MicroGuard CE Disposable Cleanroom Microporous Coverall, Tunnelized Elastic Wrist and Ankle	Serged Seams	M, L, XL, 2XL, 3XL, 4XL	25	$222.00	Choose size
CE8019CI	MicroGuard CE Disposable Cleanroom Microporous Coverall with Hood and Boot, Tunnelized Elastic Wrist and Ankle	Serged Seams	M, L, XL, 2XL, 3XL, 4XL	25	$275.00	Choose size
CE8046CI	MicroGuard CE Disposable Cleanroom Microporous Frock, No Pockets, Tunnelized Elastic Wrist, Bound Mandarin Collar	Serged Seams	M, L, XL, 2XL, 3XL, 4XL	50	$233.00	Choose size
CE8063CI	MicroGuard CE Disposable Cleanroom Microporous Hood, Elastic Face	Serged Seams	One size	100	$185.00
CE8065CI	MicroGuard CE Disposable Cleanroom Microporous Sleeves, 18" Length	Serged Seams	One size	100	$191.00
CE8103CI	MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole	Serged Seams	One size	200	$214.00
CE8104CI	MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole	Serged Seams	One size	200	$305.00
CE8105CI	MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole	Serged Seams	One size	200	$220.00
CE8106CI	MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole	Serged Seams	One size	200	$281.00

Prices are per case and refresh from the store. Sized garments open the product page to pick the size; one-size items add straight to the cart. Contractor Direct pricing and free shipping apply once the order reaches the International Enviroguard line.

MicroGuard CE physical properties (manufacturer test data)

Test	Method	Result
Air Permeability (cfm)	ASTM D737	<0.55
Burst Strength (lbs)	ASTM D3787	20
Tensile Strength (lbs) Machine Direction	ASTM D5034	23.2
Tensile Strength (lbs) Cross Direction	ASTM D5034	18.1
Tensile Strength (lbs) Trapezoidal - Machine Direction	ASTM D1117	9.76
Tensile Strength (lbs) Trapezoidal - Cross Direction	ASTM D1117	4.97

Source: International Enviroguard MicroGuardCE.pdf (manufacturer sell sheets and catalogs), copied as published. The employer's hazard assessment under OSHA 29 CFR 1910.132 decides what a job needs; these are the manufacturer's test results, not a fitness statement for any task.

MicroGuard CE: Liquid & Chemical Testing

TEST	METHOD	RESULT
Bleach 5%	ASTM T903	Pass
Hydraulic Jack Oil	ASTM T903	Pass
Isocyanate Based Paint Hardener	ASTM T903	Pass
Motor Oil	ASTM T903	Pass
Sodium hydroxide	ASTM T903	Pass
Mineral Oil	ASTM T903	Pass
Blood	ASTM 1670-07	Pass

MicroGuard CE barrier tests

Test	Method	Result
Blood	ASTM 1670-07	Pass

Standards named by the manufacturer for MicroGuard CE

Standard	What the manufacturer states
Cleanroom Classifications (ISO 14644 class table)	ISO CLASS \| ISO CLASS LIMITS† \| FS209 CLASS LIMITS†† \| MICROGUARD CE®
BS EN 1149-1:2006	Anti-Static Fabric. BS EN 1149-1:2006 Protective clothing. Electrostatic properties- Test method for measurement of surface resistivity. Surface resistance= 1.2 x 109 Ω
Seam Safety Guide capability chart (Serged Seam Brands)	MicroGuard CE®: Dry particulate, dust, dirt, grime ✓ \| Overspray ✓ \| Heavy splash, liquids under pressure ✓ \| Blood ASTM F1670 ✓ \| Anti-static EN 1149-5 ✓

Source: International Enviroguard MicroGuardCE.pdf, SeamSafetyGuide.pdf (manufacturer sell sheets and catalogs), copied as published. The employer's hazard assessment under OSHA 29 CFR 1910.132 decides what a job needs; these are the manufacturer's test results, not a fitness statement for any task.

Manufacturer limitations and warnings

Product Usage Advisory — WARNING: Cleanroom apparel should not be used around heat, flames, sparks, or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.

International Enviroguard MicroGuard CE questions

What is MicroGuard CE made of? low-linting fabric and tunnelized elastic that traps particles; Anti-Static Fabric; Microporous fabric (brand page: 'soft, non-woven fabric with a microporous film')

Which MicroGuard CE garments are available? CE8013CI (MicroGuard CE Disposable Cleanroom Microporous Coverall, Tunnelized Elastic Wrist and Ankle), CE8019CI (MicroGuard CE Disposable Cleanroom Microporous Coverall with Hood and Boot, Tunnelized Elastic Wrist and Ankle), CE8046CI (MicroGuard CE Disposable Cleanroom Microporous Frock, No Pockets, Tunnelized Elastic Wrist, Bound Mandarin Collar), CE8063CI (MicroGuard CE Disposable Cleanroom Microporous Hood, Elastic Face), CE8065CI (MicroGuard CE Disposable Cleanroom Microporous Sleeves, 18" Length), CE8104CI (MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole), CE8105CI (MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole), CE8106CI (MicroGuard CE Disposable Cleanroom Microporous Boot Cover, Non-Skid Sole), CE8103CI (MicroGuard CE Disposable Cleanroom Microporous Shoe Cover, Non-Skid Sole).

What standards does the manufacturer name for MicroGuard CE? Cleanroom Classifications (ISO 14644 class table); BS EN 1149-1:2006; Seam Safety Guide capability chart (Serged Seam Brands). The wording for each is in the standards table above.

Does the manufacturer publish chemical test data for MicroGuard CE? Yes: 1 table on this page (Liquid & Chemical Testing), copied from the sell sheet. Penetration and repellency classes under ISO 6530 / EN 368 and permeation breakthrough under ASTM F739 are different tests; the guide on permeation versus penetration explains how to read them.

What does the manufacturer warn about MicroGuard CE? Product Usage Advisory — WARNING: Cleanroom apparel should not be used around heat, flames, sparks, or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.

Is this a statement that the garment is compliant for my job? No. These are the manufacturer's published test results and the standards it names. Under OSHA 29 CFR 1910.132 the employer's hazard assessment decides which protective clothing a task needs.