Skip to main content
Home › Guides › Hand protection › Disposable glove sizes
Guide · Hand protection · EN 420 sizing · 21 CFR 800.20 · manufacturers’ size charts

Bayshore Safety & Industrial Supplies Guide

What size disposable gloves do I need? Nitrile, latex and vinyl sizes S to 5XL, the surgical half sizes 5½ to 9, how tight a disposable glove should fit, and the small sizes

Measure around the palm at the knuckles, thumb excluded: the inches are the number size, and the number maps to the letter on the box the way the manufacturers print it, S (7), M (8), L (9), XL (10), 2XL (11). A 7-inch hand is a small, an 8-inch hand a medium, a 9-inch hand a large, a 10-inch hand an extra large. That scale is EN 420, the European sizing standard MCR Safety and Portwest print beside the letters (size 7 = 178 mm, 8 = 203, 9 = 229, 10 = 254, 11 = 279), and MCR Safety’s own guide reads the letter from a ruler laid across the palm (3.5 to 4 inches is a large). Disposable gloves run S to 5XL on this site: Radians RWG94 and RWG91 in S to XL or 2X, MCR Safety NitriShield in S to 2XL and the Dura Shield 6001 to 3XL, PIP Ambi-dex in S to 2XL and the Grippaz 67-307 to 3XL and 67-308 to 5XL; no disposable glove here is stocked in XS, so S (7) is the smallest size on these pages. Surgical gloves are sized differently, by number in half steps (5½ to 9), as hand-specific left-and-right pairs; examination gloves are ambidextrous and lettered. Should a nitrile glove be tight? Snug at the palm and fingertips with no slack at the tips, because a loose fingertip catches and tears and a loose cuff lets liquid in; too tight and the cuff splits on donning and the hand tires. A disposable is stretched over the hand, so most people wear one letter smaller in nitrile than in a leather work glove, and the thinner the mil the closer the fit. Boxes hold 100 gloves (50 for the heavier 11 to 14 mil latex and 8 mil nitrile); Radians packs 10 boxes to a case, and the case count is on every product page.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · the Sizes lines and size charts on the Radians RWG94 and RWG91 pages (S (7) to 2X; hand circumference by size; radians.com, Nov 8 2026), the MCR Safety disposable glove pages and size guide (S (7) to 3XL; the ruler-across-the-palm method; mcrsafety.com, Nov 6 2026) and the PIP Ambi-dex and Grippaz pages (S (7) to 2XL (11), with 67-307 to 3XL and 67-308 to 5XL; us.pipglobal.com, November 2026); EN 420 sizing as MCR Safety and Portwest print it (size 7 = 178 mm hand circumference, 8 = 203, 9 = 229, 10 = 254, 11 = 279); 21 CFR 800.20 and 880.6250; the case and box counts on the product pages (Radians: 10 boxes of 100 per case); Liberty Safety product pages and spec sheets (libertysafety.com, read Nov 11 2026); Armor Guys product pages, spec sheets, catalog C.009 and workbook C.010 (armorguys.com, read Nov 12 2026)
Radians RWG9414 4 Mil Nitrile Disposable Examination Glove, Nitrile CoatedRadians RWG9414 4 Mil Nitrile Disposable Examination Glove, Nitrile CoatedRadians sizes this glove S; M; L; XL; 2X, with its hand-circumference chart on the product page (Radians data)

Why the same letter fits differently on a disposable and a work glove. A knit or leather work glove is cut to a pattern with ease built in; the letter is the pattern size. A disposable glove is a thin film stretched over the hand, and its letter is the hand it fits when stretched, which is why the manufacturers print the EN 420 number beside the letter on their disposable pages (Radians: S (7), M (8), L (9), XL (10); PIP: S (7) to 2XL (11)) and why the fit question is answered by the hand measurement rather than by the size worn in another glove. The number is a hand circumference in inches, measured around the palm at the knuckles with the thumb out; EN 420 ties each number to a millimeter figure and a hand length. MCR Safety’s size guide uses a second method for the same answer: lay a ruler across the palm below the knuckles and read the width, 3 to 3.5 inches a medium, 3.5 to 4 a large, 4 to 4.5 an extra large. Thickness changes the fit: a 3 or 4 mil glove stretches more and hugs the hand, a 6 to 8 mil glove holds its shape and feels a half size smaller, and the 11 to 14 mil latex gloves feel smaller again. Women’s hands run a size or more smaller on the same scale (the average glove size for a woman guide has the measurements), which is why the small and extra-small questions are about disposables more than any other glove: a small (7) fits a 7-inch hand, and the gloves that come in XS are the ones for hands under 7 inches. At the other end, 2XL (11) fits an 11-inch hand and the few styles made in 3XL and above (PIP Grippaz 67-307 and 67-308, MCR Safety 6001 and the PD6953 cut glove) are the answer to “do they make 3XL nitrile gloves.” The FDA’s rules do not set glove dimensions; 21 CFR 800.20 governs leaks and 880.6250 defines the device, and the ASTM specifications (D6319 for nitrile) carry the dimension tables the manufacturers build to.

The questions, one by one

From the manufacturers’ size charts and the EN 420 scale they print.

What size disposable gloves do I need?Measure the palm circumference at the knuckles, thumb excluded. 7 inches: S. 8 inches: M. 9 inches: L. 10 inches: XL. 11 inches: 2XL. Between sizes, the thinner the glove the more it stretches, so a 4 mil glove takes the smaller size and an 8 mil glove the larger. The product page prints the manufacturer’s own chart.
Should nitrile gloves be tight?Snug, not tight: no slack at the fingertips (a loose tip catches and tears), a cuff that seals at the wrist without rolling, and no strain across the palm. A glove that splits at the cuff when pulled on is a size too small; one that wrinkles at the fingertips is a size too large.
How do I measure for nitrile gloves without a tape?Lay a ruler across the palm just below the knuckles and read the width, as MCR Safety’s guide does: about 3 inches is a small, 3 to 3.5 a medium, 3.5 to 4 a large, 4 to 4.5 an extra large. Or wrap a string around the knuckles and measure the string.
What are the different sizes of nitrile, latex and vinyl gloves?S, M, L, XL, 2XL and, on a few styles, 3XL to 5XL (XS where a manufacturer makes it; none stocked here). On this site: Radians RWG94 nitrile S to 2X, RWG91 latex S to XL; MCR Safety NitriShield S to 2XL, 6001 to 3XL; PIP Ambi-dex nitrile, latex and vinyl S to 2XL, Grippaz 67-307 to 3XL, 67-308 to 5XL; Portwest A930 S to XL. Vinyl runs the same letters and fits looser.
What are the standard sizes of surgical gloves, and what is size 7?Surgical gloves are numbered in half steps, 5½ to 9, and made as left-and-right pairs; the number is the hand circumference in inches, so a size 7 surgical glove fits a 7-inch hand, which is a small in examination-glove letters. Size 7 in women’s dress gloves is the same measurement. This site lists examination gloves, not surgical gloves.
Where can I find nitrile gloves in small sizes?Every disposable line here runs to S (7), which fits a 7-inch hand: Radians RWG9413 and RWG9414, MCR Safety 6012 and 5045, PIP 66-400 and 2940. None is stocked in XS on this site; a hand under 7 inches around takes the S in the thinnest glove (3 or 4 mil), which stretches to fit. The size is the part-number ending (RWG9413S, 6012S, 66-400/S).
Do they make 2XL and 3XL nitrile gloves?2XL (11) is standard on most lines (Radians RWG94 2X, MCR Safety 6012 XXL, PIP 66-400 2XL). 3XL and larger: PIP Grippaz 67-307 (3XL) and 67-308 (to 5XL), MCR Safety 6001 (3XL). The downsides of nitrile guide also lists the 3XL question.
Are there different grades of nitrile gloves, and does grade change the size?Examination (medical) grade and industrial grade, plus the chemotherapy-tested examination gloves; the grades are quality and clearance levels (21 CFR 800.20), not sizes. The same letter means the same hand on both grades from the same manufacturer.
How many gloves in a box, and boxes in a case?Usually 100 per box, 50 for the heavier gloves (Radians RWG9114 14 mil latex, PIP Grippaz 8 mil, MCR Safety 6062 and 6012 6 mil in some sizes). Radians packs 10 boxes of 100 to a case (1,000 gloves) and 10 boxes of 50 for the 14 mil latex; MCR Safety and PIP state the case count on each page, and the price shown is per the unit named.

The size scale, in plain words

The figures the Radians, MCR Safety and PIP disposable glove pages print, and what each means for fit.

  • The number is the hand: circumference in inches around the palm at the knuckles, thumb excluded. 7 = S, 8 = M, 9 = L, 10 = XL, 11 = 2XL on the manufacturers’ charts.
  • EN 420 (now EN ISO 21420) fixes the numbers in millimeters: 7 = 178 mm, 8 = 203 mm, 9 = 229 mm, 10 = 254 mm, 11 = 279 mm, each with a hand length; MCR Safety and Portwest print the number beside the letter.
  • XS, where a manufacturer makes it, fits hands under 7 inches (none stocked here); 3XL and above fit hands over 11 inches; few disposable styles are made outside S to 2XL.
  • Thickness and fit: 3 to 4 mil stretches and hugs; 6 to 8 mil holds its shape; 11 to 14 mil latex feels a half size smaller. Choose by the hand, then adjust by the mil.
  • Ambidextrous: examination and industrial disposables fit either hand; surgical gloves are left and right. Finger cots are sized S to L by the finger.
  • Grade is not size: examination and industrial grades of the same style share the chart.
  • Box and case: 100 gloves per box (50 for the heavy ones); the case count and the unit the price covers are on every product page.
EN 420 as MCR Safety and Portwest print it; the Radians RWG94 and RWG91 size charts; the MCR Safety size guide; the PIP Ambi-dex and Grippaz size lines.
Disposable glove sizes on this site, by manufacturer and style
Manufacturer and styleMaterial and thicknessSizesBox / case
Radians RWG9413, 9414, 9415, 9426, 9417, 9418Nitrile, 3 to 8 mil, examination gradeS (7), M (8), L (9), XL (10); 2X on 9414, 9415, 9417, 9418, 9426100 per box, 10 boxes per case
Radians RWG9405, 9406, 9606, 9608Nitrile, 5 to 8 mil, industrial gradeS to 2X100 per box, 10 boxes per case
Radians RWG9104, 9105, 9115, 9114Latex, 4 to 14 milS to XL; 2X on the 14 mil100 per box (50 for the 14 mil), 10 boxes per case
MCR Safety NitriShield 6010, 6015, 6060, 6061, 6062; NitriMed 6012Nitrile, 3.5 to 6 milS to XL or 2XLPer page
MCR Safety Dura Shield 6001Nitrile, 4 milS to 3XLPer page
MCR Safety SensaTouch 5010, 5015, 5025Vinyl, 5 to 6.5 milS to XLPer page
PIP Ambi-dex 66-400, 63-503, 2940, 2550, 64-V2000PFNitrile, latex and vinyl, 4 to 14 milS (7) to 2XL (11)100 per box (50 for the 14 mil latex 2550)
PIP Grippaz 67-306, 67-246, 67-256Nitrile, 6 milS to 2XL48 or 50 per box
PIP Grippaz 67-307, 67-308Nitrile, 7 and 8 milS to 3XL (67-307); S to 5XL (67-308)48 or 50 per box
Portwest A930Nitrile, 7 milS to XL100 per box

Sizes stocked can differ from sizes made; the product page shows the sizes offered.

Source: The Sizes, Thickness and Box Count lines and the size charts on the product pages on this site.

Questions people ask

What size disposable gloves do I need?

Measure around the palm at the knuckles, thumb out: 7 inches S, 8 M, 9 L, 10 XL, 11 2XL. Thinner gloves stretch more, so a 4 mil takes the smaller of two sizes and an 8 mil the larger.

Should nitrile gloves be tight?

Snug: no slack at the fingertips and a cuff that seals without rolling, but not so tight the cuff splits on donning. Loose tips tear and loose cuffs let liquid in.

How do I measure for nitrile gloves?

Tape around the knuckles with the thumb excluded, or MCR Safety’s method of a ruler across the palm (3.5 to 4 inches is a large). The number of inches is the size number.

What are the different sizes of nitrile gloves?

S to 2XL on most lines, with 3XL on MCR Safety 6001 and PIP Grippaz 67-307 and up to 5XL on Grippaz 67-308. Radians RWG94 runs S to 2X.

What are the different sizes of latex gloves?

S to XL on Radians RWG91 (2X on the 14 mil RWG9114), S to 2XL on PIP Ambi-dex 2550 and the Repel latex gloves, S to XL on MCR Safety Med Tech 5049.

What are the standard sizes of surgical gloves?

Numbered half sizes from 5½ to 9 as left-and-right pairs, the number being the hand circumference in inches; this site lists examination gloves, which are ambidextrous and lettered.

What size is 7 in surgical gloves?

A 7-inch hand, which is a small in examination-glove letters; the same number means the same hand in women’s dress gloves.

Where can I find nitrile gloves in small sizes?

Every disposable line here runs to S (7), the size for a 7-inch hand; none is stocked in XS. The size is the part-number ending and the product page lists what is stocked.

Do they make 3XL nitrile gloves?

Yes: PIP Grippaz 67-307 (3XL) and 67-308 (to 5XL) and MCR Safety Dura Shield 6001 (3XL) on this site; most other styles stop at 2XL.

Are there different grades of nitrile gloves?

Examination (medical) grade, industrial grade and chemotherapy-tested examination gloves; the grade is a clearance and quality level, not a size, and the chart is the same.

How many boxes come in a case of nitrile gloves?

Radians packs 10 boxes per case (100 gloves per box, 50 for the 14 mil latex); MCR Safety and PIP state the count on each page. The price shown is per the unit named on the page.

Is there a pack of 100 disposable gloves?

A box of 100 is the standard unit on the Radians, MCR Safety, PIP and Portwest disposable pages, with 50 for the heavier gloves and 48 for some Grippaz styles; the page says whether the price is per box or per case.

Do nitrile gloves run small?

They fit closer than work gloves because the film is stretched over the hand; the manufacturers’ number sizes correct for it. Measure and use the chart rather than the letter worn in a leather glove.

What size disposable gloves fit a woman’s hand?

By measurement: most women’s hands fall at 6½ to 7½ inches, an S in a disposable (the thin gloves stretch to the smaller hands); the average glove size for a woman guide has the figures and the gloves made in those sizes.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need gloves matched to a crew’s work?Call (925) 215-7337 or email us the task, the hazard and the sizes and we will quote by the dozen with the manufacturer’s ratings listed.
Work glove selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.