Bayshore Safety & Industrial Supplies Guide
Why are rain coats so expensive, and can a raincoat be re-waterproofed? What drives the price of work rainwear, which rain suit material is most waterproof, PVC and PU vs coated nylon, ponchos in hot weather, yellow rainwear, and care
Rain coats are expensive when they are built to breathe, and cheap when they are built only to keep water out. A coated PVC or polyurethane work rain jacket is a woven polyester with a solid waterproof film: the Liberty Safety DuraWear 1225 (0.35 mm PVC on polyester, 48 inch coat, detachable hood) is $11.49 on our site today, the three-piece 1220 suit $16.49, and an emergency polyethylene coat $1.29, because a solid film is cheap to make and waterproof by nature. What costs money is a membrane or a coating engineered to let sweat vapor out while keeping rain out, taped seams, waterproof zips, a durable water-repellent finish on the face fabric and the testing behind the EN 343 or millimeter rating on the tag; that is the $150 to $500 outdoor jacket. Re-waterproofing follows from the construction: a solid PVC or PU coating is waterproof for as long as it is intact and cannot be "re-treated", only patched; a face fabric over a membrane sheds water because of its repellent finish, and that finish can be renewed with a wash-in or spray-on treatment when water starts to soak the face. For a work crew in steady rain the most waterproof suit is the solid-film one, and the figure to read is the fabric thickness and the seam construction the manufacturer prints.
Liberty Safety DuraWear 1220 Rain Jacket, Polyester, PVC, Yellow, 7 SizesLiberty Safety prints a three-piece suit: waterproof jacket, bib overall pants and detachable hood, dual-layer 0.35 mm PVC on polyester, front storm fly with zipper and snaps; sold as a setWhere the money goes. A rain garment is a fabric, a coating or membrane, seams, closures and a finish. A solid film (PVC, polyurethane, polyethylene) on a woven base is waterproof as made, is welded or heat-sealed at the seams (Liberty Safety prints "heat-sealed seams" on its 1026 poncho), and costs little; it does not breathe, so it is sold with a cape-vented back and underarm vents for air (the 1225 has a "cape-vented back", the Tech Series C16740GB "underarm air vents"). A breathable construction (a microporous membrane or hydrophilic coating under a face fabric) costs more to make, needs its seams taped to stay waterproof, needs a water-repellent finish on the face so the fabric does not wet out and stop breathing, and is tested and rated; every one of those steps is on the price tag. The outdoor-brand jacket people ask about is the second construction at its most refined. A work crew that stands in rain for a shift usually wants the first.
Who pays. Under 29 CFR 1926.95(d)(4)(ii) the employer is not required to pay for "ordinary clothing, skin creams, or other items, used solely for protection from weather, such as winter coats, jackets, gloves, parkas, rubber boots, hats, raincoats"; a rain suit required for another hazard (a Class 3 hi-vis rain suit on a roadway, an FR rain suit near flame, a chemical-splash suit) is PPE the employer provides. That is why a crew’s plain rain jackets are often the workers’ own and the hi-vis and FR suits the company’s.
The constructions, from cheapest to dearest
Fabric statements are Liberty Safety’s; the EN 343 and millimeter figures are as the manufacturers who print them state them.
The questions, one by one
Each answer uses the manufacturers’ fabric statements and the regulations named in the byline.
Why are rain coats so expensive?
The expensive ones are breathable: a membrane or coating engineered to pass sweat vapor, taped seams, waterproof zips, a repellent finish, a lining, and a lab test behind the rating, each a cost. A coated PVC work coat skips all of that because a solid film is waterproof on its own; on our site today the DuraWear 1225 PVC coat is $11.49 and the three-piece 1220 suit $16.49, and they keep more rain out than most $300 jackets, at the price of not breathing. Brand, cut and color add the rest. So the honest answer is: you are paying for breathability and the engineering that makes a breathable fabric stay waterproof, and whether that is worth it depends on how hard you work in the rain.
Can a raincoat be re-waterproofed?
It depends on what made it waterproof. A solid PVC, PU or polyethylene coating is the barrier and cannot be re-treated; when it cracks, delaminates or wears through, the coat is patched (PVC repair tape or a vinyl cement on a PVC suit) or replaced. A membrane or laminate jacket is waterproof by its membrane and sheds water by a repellent finish on the face fabric; when the face starts to "wet out" (darken and soak) the membrane may still be fine and the finish is what has gone, and a wash-in or spray-on water-repellent treatment, applied to a clean coat and heat-set as the treatment’s label says, renews it. Leaking seams on either kind are sealed with a seam sealer for the fabric type. The one thing that never works is spraying a repellent on a coated PVC suit; it has nothing to renew.
What is the most waterproof raincoat, and which type of raincoat is most waterproof?
A solid-film coated suit with welded or heat-sealed seams: the 0.35 mm PVC on polyester (Liberty 1220, 1320, FR1340) and the heavier PVC chemical-splash suits are waterproof for as long as the film is intact, with no rating needed because a continuous film does not pass water at any pressure a person meets. Among rated breathable fabrics the millimeter figure is the measure: 5,000 mm is where the manufacturers start calling a fabric waterproof, 10,000 mm holds steady rain and the pressure of a strap, 15,000 to 20,000 mm is wind-driven rain over a long shift, as the waterproof-rating guide linked below explains. "Most waterproof" and "most comfortable" pull in opposite directions; pick by how long you stand in it and how hard you work.
How to know if a rain jacket is good?
Read the construction, not the adjective. Good signs on a work coat: the fabric thickness printed (0.35 mm PVC on a woven base rather than a thin unsupported film), welded or heat-sealed seams, a storm fly over the zipper, a hood that detaches or stows, vents (cape-vented back, underarm), reinforced joints, a hi-vis class or FR statement if the site needs one, and a size range to 4XL or 5XL so it goes over a jacket. On a breathable coat: a millimeter or EN 343 rating, taped seams, a repellent finish and a brand that prints all three. A coat that prints "waterproof" and nothing else is a coat whose seller does not know.
Is a poncho good for hot weather, and are emergency ponchos waterproof?
A poncho is the most ventilated rain garment there is, open at the sides and loose over the body, which is why it is the hot-weather rain cover for a crew that would sweat through a suit; its weaknesses are wind (it flaps) and work that needs the arms free (it has reach-through sleeves, not real ones). An emergency poncho of 0.02 mm polyethylene is waterproof, once; it tears and it is thrown away. The PVC poncho (Liberty 1026, heat-sealed seams, snap sides) is the reusable one. The poncho guide linked below weighs poncho against jacket for work.
Why do fishermen wear yellow raincoats, and are yellow raincoats in style?
Yellow was the color of oilskin, the linseed-oiled cotton sailors wore before rubber and PVC, and it stayed because it is seen on a gray sea: a man overboard in yellow is found. Work rainwear kept the color for the same reason, and the DuraWear line is yellow by default. Whether it is in style is not a safety question; whether it is seen is, and on a roadway the answer is a hi-vis Class 3 suit in fluorescent yellow-green or orange, not plain yellow, as the hi-vis rain gear guide linked below explains.
How to put on a rain poncho, and how do you fold a poncho?
Hood up first, then the body over the head so the front and back hang even, then snap or tie the sides from the hips up, leaving the arm openings; over a backpack, put the pack on first and the poncho over it. To fold: lay it flat, fold the sides to the middle in thirds, then fold from the hem up into a square the size of the hood, and tuck it into the hood or its pouch. A polyethylene emergency poncho is rolled, not folded, so it does not crack along a crease.
Can a rain jacket keep me warm, and can you wear a rain jacket in the summer?
A rain jacket keeps you warm only by blocking wind and rain; it has no insulation, and a coated PVC coat holds sweat in, which is cold once you stop moving. Over a fleece or an insulated vest it works as a shell in the cold, and the lined hi-vis rain jackets (Liberty C16728GBX, "fully insulated fleece liner") are the winter version. In summer a coated coat is hot; a poncho or a vented coat is what a crew wears, and the dress-for-cold guide linked below covers layering.
Which waterproofer for jackets, and how do you clean a rain jacket?
The manufacturers of repellent treatments sell wash-in and spray-on versions for membrane jackets and we do not rank them; the rule is to use the one made for the fabric type, on a clean coat, and heat-set it if the label says to. Cleaning: a coated PVC suit is hosed or sponged with soap and water and hung to dry (no machine, no dryer, no solvents, which attack PVC); a breathable jacket is machine-washed cool on gentle with a detergent made for technical fabrics (ordinary detergent leaves residue that stops the finish working), rinsed twice and tumbled low or air-dried, then re-treated if it wets out.
Which waterproof overalls, and what is the highest level of waterproof jacket?
For work, bib overalls in 0.35 mm PVC on polyester (the pants of the Liberty 1220 and 1320 suits, with "heavy PVC reinforced joints" on the 1320) are waterproof as made and take the abuse of kneeling; the hi-vis Class E rain pants (C16920G, C16929GB) are the roadway version. The "highest level" of a rated jacket is the EN 343 top class for water penetration and breathability, or the highest millimeter figure printed; the waterproof-rating guide linked below has the scale. For standing in rain the solid-film suit is above any of them.
Does OSHA require rain gear, and who pays for it?
No OSHA rule requires rainwear as such, and 1926.95(d)(4)(ii) names "raincoats" among the weather items the employer need not pay for. Rainwear becomes PPE when another rule reaches it: a Class 2 or 3 hi-vis rain suit where the MUTCD and 1926.201 require hi-vis on a roadway, an FR rain suit where flame or arc is the hazard, a chemical-splash suit under 1910.132 where the hazard assessment finds liquid chemicals. Those the employer provides, as our hi-vis and FR guides linked below explain.
In plain words
- Expensive rain coats are breathable: membrane, taped seams, repellent finish, testing. Coated PVC work coats are cheap because a solid film is waterproof as made.
- A coated PVC or PU coat cannot be re-waterproofed, only patched; a membrane jacket’s repellent finish can be renewed with a wash-in or spray-on treatment.
- Most waterproof for standing in rain: a 0.35 mm PVC-on-polyester suit with welded seams. Most comfortable for working in rain: a rated breathable jacket.
- A poncho is the hot-weather rain cover; an emergency poncho is waterproof once.
- Yellow is the old oilskin color and is seen at sea; on a roadway the rule is a hi-vis Class 3 suit.
- Clean PVC with soap and water and hang it; machine-wash a membrane jacket cool with a technical-fabric detergent.
- OSHA does not require rainwear and the payment rule excepts raincoats; hi-vis, FR and chemical rain suits are PPE the employer provides. We sell nationwide.
Questions people ask
Why are rain coats so expensive?
The expensive ones are breathable: membrane, taped seams, zips, repellent finish and testing. A coated PVC work coat skips all of that and costs about $11 to $20 on our site.
Can a raincoat be re-waterproofed?
A membrane jacket’s repellent finish can be renewed with a wash-in or spray-on treatment; a coated PVC or PU coat cannot, only patched.
What is the most waterproof raincoat?
A solid-film coated suit with welded seams, such as 0.35 mm PVC on polyester; among rated fabrics, the highest millimeter or EN 343 figure.
Which type of raincoat is most waterproof?
Coated PVC or PU for standing in rain; a rated breathable laminate for working hard in it.
Is a poncho good for hot weather?
Yes; it is the most ventilated rain garment. It flaps in wind and has no real sleeves.
Are emergency ponchos waterproof?
Yes, once; 0.02 mm polyethylene tears and is thrown away. A PVC poncho is the reusable one.
How do you know if a rain jacket is good?
It prints its construction: fabric thickness or a rating, welded or taped seams, storm fly, hood, vents, and a size range that fits over a jacket.
Why do fishermen wear yellow raincoats?
Oilskin was yellow and yellow is seen on a gray sea; work rainwear kept the color.
Can a rain jacket keep me warm?
Only by blocking wind and rain; it has no insulation. Layer under it or buy the fleece-lined version.
How do you clean a rain jacket?
PVC: soap, water, hang to dry. Membrane: cool gentle wash with a technical-fabric detergent, then re-treat if it wets out.
Does OSHA require rain gear?
No; raincoats are a weather item the payment rule excepts. Hi-vis, FR and chemical rain suits are PPE.
What does 0.35 mm mean on a rain suit?
The coated fabric thickness: the work standard for PVC on polyester, thicker and tougher than a 0.10 mm film suit.
Related guides
PVC vs polyurethane rain gearWhat the fabric names meanWhat does an 8,000 mm waterproof rating mean?EN 343 classes and the figuresWhat are the types of waterproof rain jackets?And what waterproof meansIs a rain poncho better than a rain jacket for work?What the rainwear data saysWhere can you buy a rain poncho?And is a dollar-store poncho the same thingHi-vis rain gear and cold-weather gearKeeping the class ratingWhy are rain boots called galoshes?Galoshes, overshoes, overboots and PVC work bootsHow do you dress for cold-weather work?Base, mid and shell layers, insulated coveralls and bibsThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
