Skip to main content
Home › Guides › Heat, cold and ergonomics › Dressing for cold work
Guide · Cold weather · OSHA Cold Stress Guide · NIOSH · EN 511 · ANSI/ISEA 107

Bayshore Safety & Industrial Supplies Guide

How do you dress for cold-weather work? Base, mid and shell layers, insulated coveralls and bibs and how to size them, the warmest vests, work socks, balaclavas and neck gaiters, and what the manufacturers state about each

In layers, loose, with the wet layer on the outside. OSHA’s Cold Stress Guide says to wear at least three loose layers: an inner layer of wool, silk or synthetic that wicks sweat off the skin (not cotton, which holds it), a middle layer of wool or synthetic that insulates even when damp, and an outer layer that blocks wind and rain and still lets moisture out; plus a hat or hood, insulated gloves, and insulated waterproof boots. The garments on this site that fill those slots are published with their fabrics: fleece-lined and insulated hi-vis bombers and parkas with a waterproof shell (Portwest 300D Industry at 15,000 mm, Radians PU-coated oxford, Neese Air-Tex), insulated bibs and coveralls (sized over the work clothes, one size up from the pants), fleece balaclavas and hard hat liners, insulated neck gaiters, work socks and Thinsulate-lined gloves. The warmest vest is the one worn as a middle layer under a shell; a vest alone is a mild-weather garment.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · OSHA Cold Stress Guide (protective clothing: at least three loose layers; inner wicking layer of wool, silk or synthetic, not cotton; middle insulating layer of wool or synthetic; outer wind and rain layer; hat or hood; insulated gloves; insulated waterproof boots) and NIOSH, Cold Stress: Cold and Work (extra socks, gloves, hat and jacket to carry) as the live cold stress guide quotes it; OSHA states there is no specific cold-environment standard; Portwest product data (300D Industry US463 bomber: 7 oz polyester oxford, fleece lining, 15,000 mm; Rainwear Softshell TK50 3L; CS20 7 oz polyester fleece balaclava; SK33 work socks; Bizflame FR422 insulated FR bib, FR610 parka; portwest.com); Radians SJ11QB and SJ411QB PU-coated hi-vis outerwear, Nordic Blaze liners (radians.com); MCR Safety Luminator bombers and IG7/IG8 insulated neck gaiters, 100 g Thinsulate mechanics gloves; PIP winter liners (2- and 3-layer cotton twill, fleece and sherpa) and Boss Heatrac insulated gloves (PIP Rich Product Data, October 2026); the live coverall size chart and EN 511 guides on this site; Liberty Safety product pages and spec sheets (libertysafety.com, read Nov 11 2026); ML Kishigo product pages and spec sheets (kishigo.com, read Nov 12 2026); Armor Guys product pages, spec sheets, catalog C.009 and workbook C.010 (armorguys.com, read Nov 12 2026)
Portwest US463 Hi-Vis Winter Bomber JacketPortwest US463 Hi-Vis Winter Bomber JacketPortwest lists the 300D Industry US463 bomber as 7 oz polyester oxford with a fleece lining, waterproof to 15,000 mm, Type R Class 3

Why the system matters more than any one coat. OSHA states that there is no specific cold-environment standard; the employer’s duty comes from the general duty clause, and the agency’s Cold Stress Guide and NIOSH’s Cold and Work guidance are the texts that say what to wear. Both say the same thing: layers, because insulation is trapped air and three thin layers trap more than one thick one and can be shed when the work warms you; loose, because tight clothing compresses the insulation and restricts circulation; and dry, because wet insulation stops insulating and sweat is the usual source of the wet. The live cold stress guide covers the injuries and the employer’s program; this page is the clothing, slot by slot, with what the manufacturers publish about each garment.

Cold-weather clothing, slot by slot

The layer rules are OSHA’s and NIOSH’s as the live cold stress guide quotes them; fabric statements are the manufacturers’ own from the product pages on this site.

What is the three-layer system, and why not cotton?Inner (base) layer: wicks sweat away from the skin and dries fast; OSHA names wool, silk or synthetic, “not cotton, which holds sweat”. Middle layer: insulation, wool or synthetic fleece, which keeps working when damp and is the layer you add or remove as the work changes. Outer layer (shell): blocks wind and rain and “still lets some moisture out”; on a jobsite it is usually also the hi-vis garment. Cotton is the problem in the first two slots because it absorbs water, holds it against the skin and loses its insulation when wet; a cotton hoodie under a shell is damp by mid-morning. Loose fit is part of the rule: tight layers compress the trapped air and restrict circulation to the hands and feet.
Which winter jacket, and what is the warmest type of winter jacket for work?The warmest work jacket is an insulated shell: a waterproof or water-resistant outer fabric with a fleece or quilted filling, worn over a base and a mid layer. Portwest’s 300D Industry US463 bomber is “7 oz polyester oxford” with “a fleece lining”, waterproof to 15,000 mm and Type R Class 3; Radians’ SJ411QB parka and SJ11QB bomber are PU-coated oxford polyester, Class 3, with concealed hoods; MCR Safety’s Luminator bombers are polyester Class 3 jackets; Neese’s Air-Tex parka is listed waterproof and breathable. A parka beats a bomber in the cold because it covers the hips and lower back; a bomber beats a parka for bending and climbing. Portwest’s Rainwear Softshell (3L, 8,000 mm, fleece lining) is the mild-cold shell. For a rated cold-weather jacket there is no standard; the warmth is in the filling and the fit, and the shell’s mm figure is what keeps the filling dry.
Which insulated vest is the warmest, and is a vest enough?A vest insulates the torso and leaves the arms free, which is why it is the mid layer people reach for when they are working hard; the warmest vest is a quilted or fleece vest worn under a shell, not over one. Heated vests (the live heated gear guide covers their batteries and run times) add heat at the back and chest and are also mid layers, not shells; Radians and DEWALT state that their heated garments are not FR and not hi-vis unless marked. A vest alone is a mild-weather or indoor garment; in wind and wet it is the layer under the jacket.
How do you size insulated coveralls and bibs, and do they fit the same as pants?Insulated coveralls and bibs are sized to go over work clothes, so the manufacturers’ charts run a size larger than the pants size for the same body: a man who wears a 34 waist and a large shirt is usually a large or an extra-large in an insulated coverall, and the bib’s adjustable shoulder straps take up the length. The live coverall size chart guide lays out chest, waist and height by size for the garments on this site; the rule of thumb is to measure the chest over the clothes you will wear underneath and add nothing, because the chart already allows for it. Insulated FR bibs follow the same rule: Portwest’s Bizflame FR422 bib (10 oz shell, FR lining and filling, ATPV 40 cal/cm²) is sized S to 5XL over an FR shirt and pants. Bibs stay up and seal the lower back where waist pants gap under a jacket; coveralls seal everything and are warmer and slower to get in and out of.
What socks for cold feet, and how do you keep feet warm in winter boots?Wool or synthetic socks, not cotton, for the same reason as the base layer: cotton holds sweat against the foot and a wet foot is a cold foot. OSHA’s guide lists “insulated, waterproof boots” and NIOSH says to carry extra socks and change them when they are damp. A boot sized for a thick sock, with room to wiggle the toes, is warmer than a tight boot with two socks, because compression kills the insulation and the circulation. Portwest’s SK33 work socks are the sock on this site; the warmth comes from changing them dry at lunch as much as from the fiber.
Balaclava, neck gaiter or hard hat liner: which, and can you wear one under a hard hat?The hard hat liner is the piece made for the purpose: PIP’s 2- and 3-layer liners (cotton twill and fleece; polyester, foam and fleece, some with an FR-treated shell), Radians’ Nordic Blaze liners and Portwest’s Insulatex-lined knit hats sit inside the suspension, cover the ears and neck, and are cut so the hat still seats. A fleece balaclava (Portwest CS20, 7 oz anti-pill polyester fleece; Radians Nordic Blaze 3-in-1; PIP brushed fleece) covers the head, face and neck and goes under a hat where the manufacturer allows a liner; the live winter liner guide covers what a liner does to fit. A neck gaiter (MCR Safety IG7 insulated, IG8 hi-vis lime insulated; Radians RAD-NGG) closes the gap at the collar and pulls up over the face in wind. OSHA’s guide: a hat or hood, because a hat reduces the heat lost from the head; a thick knit cap under a hard hat that was not designed for one changes the fit.
Which gloves, and what does the EN 511 number mean?Insulated gloves, water-resistant where the work is wet, in OSHA’s words. The published cold rating is EN 511, three digits for convective cold, contact cold and water penetration, which the live EN 511 guide explains; the insulation names on the product pages are the other half (MCR Safety 981 and 980 mechanics gloves with “100-Gram Thinsulate Lining”; Caiman MAG 2915 with Heatrac 100 g microfiber insulation; Boss Heatrac winter gloves). Dexterity and warmth trade against each other, which is why liners under a work glove (the live glove liner guide) are the cold-storage answer. NIOSH’s rule for everyone: do not touch cold metal with bare skin.
What about the base layer and the ten winter tips?A synthetic or wool base layer (long-sleeve top and bottoms) is the one slot most crews skip and the one OSHA puts first; we do not list base layers on this site, so the rule is the fiber, not the brand: wool, silk or synthetic, snug but not tight, changed when wet. The rest of the winter list is in the live cold stress guide and is OSHA’s and NIOSH’s: know the signs of hypothermia and frostbite in yourself and the person next to you; take warm breaks in a dry area; drink warm, sweetened, non-alcoholic fluids; schedule the heavy work in the warm part of the day; use a buddy system; acclimatize new workers; carry extra socks, gloves, a hat and a jacket; keep blankets, a thermometer and chemical hot packs in the first aid kit; shield the work from wind; and do not touch cold metal bare-handed.

The words on cold-weather workwear

The vocabulary of cold-weather clothing, layer by layer.

  • Base, mid and shell: OSHA’s three loose layers; wicking inner, insulating middle, wind-and-rain outer. Not cotton in the first two.
  • Wicking: moving sweat off the skin into the fabric to evaporate; wool, silk and synthetics do it, cotton holds the water.
  • Insulated: a shell with a filling (fleece, quilted polyfill, Thinsulate). PIP prints “built-in quilted high loft polyfil insulation” on its 331 jacket; MCR Safety prints 100 g Thinsulate on its 980 and 981 gloves.
  • Softshell: a stretch woven with a fleece back, wind- and water-resistant rather than waterproof unless rated; Portwest’s Rainwear Softshell TK50 is rated 8,000 mm with 3,000 g/m²/24 h.
  • Hard hat liner: a cap with ear and neck coverage cut to fit inside a hard hat suspension; PIP 2- and 3-layer liners, Radians Nordic Blaze, Portwest Insulatex knit hats.
  • Balaclava: head, face and neck in one fleece or knit piece; Portwest CS20 7 oz fleece; FR versions in Nomex and modacrylic for arc and welding work.
  • Neck gaiter: a tube for the neck that pulls up over the face; MCR Safety IG7 and IG8 insulated, Radians RAD-NGG.
  • EN 511: the glove cold-rating standard, three digits for convective cold, contact cold and water penetration.
  • Wind chill: the cooling effect of wind on exposed skin; OSHA’s guide names shielding the work area from wind as an engineering control.
OSHA Cold Stress Guide and NIOSH Cold and Work as the live cold stress guide quotes them; manufacturer statements as published on this site.
The slots in the system and the garments on this site that fill them
Slot (OSHA / NIOSH)What it doesFabric ruleGarments on this site (as published)
Inner layerWicks sweat off the skinWool, silk or synthetic; not cottonNot listed here; the fiber rule is what matters
Middle layerInsulates, even when damp; added and removed as work changesWool or synthetic fleece; quilted vests; heated vests as a mid layerFleece-lined garments; heated vests (not FR, not hi-vis unless marked)
Outer layerBlocks wind and rain, lets moisture outWaterproof or water-resistant shell, often the hi-vis garmentPortwest 300D Industry US463 (15,000 mm, fleece lined); Radians SJ411QB parka and SJ11QB bomber (PU-coated oxford); Neese Air-Tex parka; MCR Safety Luminator bombers; Portwest Softshell 3L (8,000 mm)
LegsInsulation over the work pants, lower back coveredInsulated bibs or coveralls one size over the pantsPortwest Bizflame FR422 insulated bib and FR514 coverall (ATPV 40); Class E rain bibs over insulated pants
HeadReduces heat lost from the headHat or hood; a liner made for the hard hatPIP 2- and 3-layer winter liners; Radians Nordic Blaze; Portwest CS20 fleece balaclava and Insulatex knit hats
Neck and faceCloses the collar gap, covers the face in windFleece or insulated gaiter; FR where requiredMCR Safety IG7 and IG8 insulated gaiters; Radians RAD-NGG; FR balaclavas (Portwest, Neese, PIP Nomex)
HandsInsulated, water-resistant where wetEN 511 rating; Thinsulate or microfiber liningMCR Safety 980 and 981 (100 g Thinsulate); Caiman MAG 2915 (Heatrac 100 g); Boss Heatrac
FeetDry, insulated, room to moveWool or synthetic socks, changed dry; insulated waterproof bootsPortwest SK33 work socks

Fabric statements are per style; each product page carries its own.

Source: OSHA Cold Stress Guide and NIOSH Cold and Work as the live cold stress guide quotes them; manufacturer statements as published on this site, fetched Nov 5–9 2026.

More questions people ask

What is the point of a neck gaiter?

It seals the gap between collar and hat where wind gets in and pulls up over the face in a gust; the gaiter-and-skull-cap guide linked below covers gaiter vs snood vs balaclava.

Answers from the sources named in the byline; Liberty Safety figures from the manufacturer’s product pages and spec sheets read Nov 11 2026.

Questions people ask

How should workers dress for cold weather?

In at least three loose layers, per OSHA’s Cold Stress Guide: a wicking inner layer (wool, silk or synthetic, not cotton), an insulating middle layer (wool or fleece), a wind-and-rain outer layer, plus a hat or hood, insulated gloves and insulated waterproof boots.

What is the warmest type of winter jacket for work?

An insulated, waterproof shell worn over a base and mid layer: a fleece-lined or quilted hi-vis parka or bomber (Portwest 300D Industry, Radians SJ411QB, MCR Safety Luminator, Neese Air-Tex). A parka covers more; a bomber moves more.

Which insulated vest is the warmest?

The one worn under a shell as a mid layer; a quilted or fleece vest, or a heated vest, insulates the torso and leaves the arms free. Alone it is a mild-weather garment.

How do you size insulated coveralls and bibs?

Over the work clothes, which the manufacturers’ charts already allow for; most people take one size up from their pants size and use the bib straps for length. The live coverall size chart has the measurements.

Do insulated overalls fit the same as pants?

No; they are cut to go over pants and a shirt, so the same body is a size larger. Measure the chest over the clothes you will wear underneath.

What socks for cold feet in winter?

Wool or synthetic, not cotton, in a boot with room for them; carry a spare pair and change them when damp, as NIOSH says. Portwest SK33 is the work sock on this site.

Can you wear a beanie or balaclava under a hard hat?

Wear a liner made for the hard hat (PIP, Radians, Portwest) or a thin fleece balaclava where the hat manufacturer allows a liner; a thick cap changes the suspension fit. The live winter liner guide covers it.

What is a good breathable balaclava?

A 7 oz polyester fleece (Portwest CS20) or a 3-in-1 fleece (Radians Nordic Blaze) that can be pulled down off the mouth; for arc or welding work, an FR balaclava (Portwest Modaflame or Kermel, PIP Nomex, Neese Polartec FR).

What is another name for a neck gaiter, and what can I use instead?

A neck tube or buff; a balaclava pulled down or a scarf does the same job. MCR Safety’s IG7 and IG8 insulated gaiters and Radians’ RAD-NGG are the ones on this site.

What gloves for cold weather work?

Insulated, water-resistant where wet, with an EN 511 rating where the manufacturer publishes one; Thinsulate-lined mechanics gloves (MCR Safety 980, 981) and Heatrac-insulated gloves (Caiman MAG) are on this site. The live EN 511 and glove liner guides cover the ratings.

Does the employer have to pay for winter gear?

OSHA’s PPE payment rule excepts ordinary clothing used solely for protection from weather (winter coats, hats, gloves, boots), so most cold-weather clothing is not employer-paid PPE; the live cold stress guide and who-pays guide cover the exceptions.

What are the winter safety tips OSHA and NIOSH give?

Layers; warm breaks in a dry place; warm, sweetened, non-alcoholic drinks; heavy work in the warm part of the day; a buddy system; acclimatization; extra socks, gloves, hat and jacket; blankets, thermometer and hot packs in the first aid kit; wind shielding; no bare skin on cold metal.

What is a Level 7 jacket?

A term from the U.S. military’s cold-weather layering system (ECWCS), where level 7 is the outermost insulated parka; it is not an industrial rating, and the manufacturers we carry do not use it.

Can I wash a down or insulated work jacket with dish soap?

Follow the care label. The manufacturers we carry list wash temperatures and icons on their garment pages; a mild detergent and no fabric softener is the general rule for insulated and waterproof shells, and dish soap is not a detergent they name.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Outfitting a crew for winter?Call (925) 215-7337 or email us the work and the weather and we will quote insulated outerwear, liners, gloves and heated gear with the manufacturer’s figures listed.
Hi-vis selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.