Bayshore Safety & Industrial Supplies Guide
What are work pants and jackets made of? Polycotton, cotton, duck, twill, ripstop, stretch and the oz figure on the label, from the manufacturer’s data
Work pants, shirts, jackets and coveralls are made of a handful of fabrics, and the manufacturer names each one with two figures: the fiber content and the weight. The most common is polycotton, 65 percent polyester and 35 percent cotton (Portwest’s Kingsmill), in 6 to 9 oz weights: the polyester gives abrasion resistance, fast drying and shape, the cotton comfort, and the blend takes a 140°F wash. 100 percent cotton in 7 to 10 oz is the traditional work fabric: cooler and softer, slower to dry, more shrinkage, and the base for most treated FR workwear. Duck is a heavy, tightly woven plain-weave cotton canvas, usually 10 to 12 oz, the fabric of the classic chore coat and bib; twill is the diagonal-rib weave most work pants are woven in; ripstop is any of these with heavier reinforcing yarns woven in a grid every few millimeters so a tear stops at the grid. Stretch workwear adds 2 to 8 percent elastane (spandex) to cotton or polyester; fleece and softshell are knitted or bonded polyester for warmth; nylon and polyester Oxford, PVC- or PU-coated, are the shells of insulated and rain jackets. The oz figure is the fabric’s weight per square yard: 7 oz is a light work pant for summer, 9 oz the all-year standard, 12 oz the heavy duck of a winter bib. Portwest prints the fiber content, the weight and the wash care on every garment page, and the band below groups its workwear by fabric.
Portwest AS12 Women's ESD Work Pants, Polyester/Cotton 6 ozKingsmill polycotton, 65/35 at the weight Portwest states; the fabric most work pants and coveralls are cut from (Portwest data)Why the fabric line matters more than the garment name. Two pairs of work pants with the same pockets and the same cut wear differently because of what they are woven from and how much of it there is. The fiber decides how the fabric behaves: polyester resists abrasion and holds color and shape, dries fast and melts in flame; cotton breathes, absorbs sweat, shrinks and burns unless treated; a blend takes some of each, which is why 65/35 polycotton is the default for uniforms and daily work pants. The weave decides how it tears and how stiff it is: a plain weave (duck, canvas) is the firmest and heaviest, a twill drapes and resists wrinkles and is what most pants are, and ripstop stops a snag from running by weaving in a grid of heavier yarns. The weight, in ounces per square yard (1 oz/yd² is about 34 g/m²), decides warmth and durability against comfort: a 6 oz polycotton is a summer pant, a 9 oz a year-round one, a 12 oz duck a heavy winter bib. Stretch fibers change fit, not protection; a 2 percent elastane in cotton lets the knee bend without pulling, 7 percent in polyester makes a slim pant that moves. None of these fabrics is PPE by itself: a work pant protects against weather and wear, and where the hazard assessment finds flame, arc, traffic or chemicals the garment needs the rated version (FR, hi-vis, chemical), which Portwest lists separately with its standards.
The fabrics, as the labels name them
Fiber content and weight from Portwest’s product pages, with what each is for.
How to read the fabric line on a work garment
- Fiber content first: the percentages add to 100 and the first fiber is the majority. 65/35 is polyester-led (abrasion, drying, shape), 60/40 cotton-led (softer, cooler), 100 percent cotton the traditional choice; recycled polyester behaves like virgin polyester.
- Weight second: ounces per square yard on US labels, grams per square meter in Europe (multiply oz by 33.9). 4.5 to 6 oz is a shirt or summer pant, 7 oz the standard work pant and coverall, 9 oz a heavy pant or sweatshirt, 10 to 12 oz duck and insulated outer fabrics.
- Weave where it is named: twill for pants, duck or canvas for chore coats and bibs, ripstop for tear-stop pants and shells, Oxford for jacket shells. Where no weave is named the fabric is usually a twill or a plain weave; the weight tells you more than the weave name.
- Finish and construction: a peach finish is a brushed surface, a shower-proof or stain-resistant finish is a coating that wears with washing, a PVC or PU coating is the waterproof layer of a shell, anti-pill is a fleece treatment. Knee-pad pockets, triple stitching and bartacks are construction, not fabric.
- Wash care follows the fiber: Portwest’s polycotton and cotton coveralls and pants wash at 140°F / 60°C and tumble dry; stretch, fleece, softshell and nylon garments wash at 86 to 104°F (30 to 40°C) and are not tumble dried hot; nothing on these pages is bleached. The care label on the garment governs.
- None of it is a rating. Fiber and weight describe comfort and durability; flame resistance (ASTM F1506, NFPA 2112), hi-vis class (ANSI/ISEA 107), UPF and ESD (EN 1149, EN 61340) are separate tests printed in the Standards line, and a polycotton work pant with none of them is workwear, not PPE.
Questions people ask
What fabric are workwear jackets made of?
Cotton duck or cotton/polyester for chore and work jackets (Portwest’s UPJ10 is 60/40 cotton-polyester at 7 oz with a shower-proof finish, its DC801 100 percent cotton at 10 oz), polyester fleece and bonded softshell for warmth layers, and nylon or coated polyester shells (20D and 40D nylon, polyester Oxford, PVC- or PU-coated polyester) for insulated and rain jackets. The fiber content and weight are on each garment page.
What is the difference between duck and twill?
Both are usually cotton; duck is a heavy, tight plain weave (canvas) in 10 to 12 oz, stiff and hard-wearing, the fabric of bibs and chore coats; twill is a diagonal-rib weave, lighter and softer for the same fiber, the weave of most work pants and shirts. Ripstop is either with a grid of reinforcing yarns woven in.
What does 7 oz or 9 oz mean on work pants?
The weight of the fabric per square yard. 6 to 7 oz is a light, cooler pant or coverall (Portwest’s Kingsmill polycotton in 6 and 7 oz), 9 oz the heavier all-year standard (Titanmill Plus, Kingsmill cotton 9 oz), 10 to 12 oz the duck weights of insulated bibs and chore coats. Heavier lasts longer and is warmer; lighter breathes.
Is polycotton or 100% cotton better for work pants?
They trade off, and the labels tell you how: 65/35 polycotton resists abrasion, dries fast, holds its shape and washes at 140°F; 100 percent cotton is cooler and softer, absorbs sweat, shrinks more and is the fiber that can be FR-treated. Both are workwear, not PPE, unless the Standards line carries a rating.
How do you clean insulated coveralls and work jackets?
By the care label on the garment. Portwest’s cotton and polycotton coveralls and pants wash at 140°F / 60°C and tumble dry; its insulated cotton bib and jacket, stretch pants, fleece, softshell and nylon garments wash at 86 to 104°F (30 to 40°C) with no hot tumble; nothing is bleached. FR and hi-vis garments add their own rules (no softener; the wash count for the tape).
What are female work pants called, and are they a different fabric?
Women’s work pants, cut on a women’s block (Portwest’s PW380 and CD887 are labeled Women’s Work Pants), in the same fabrics as the men’s styles: Titanmill Plus Flex polycotton with 2 percent elastane at 7 oz, Kingsmill Polyester Flex with 7 percent elastane at 6 oz. The sizing chart is the difference, not the cloth.
Are uniforms and work pants considered PPE?
No. OSHA’s payment rule names everyday clothing (long-sleeve shirts, long pants, normal work boots) as something the employer need not provide, because it protects against weather and wear, not a workplace hazard. The rated versions are PPE: FR pants (ASTM F1506 or NFPA 2112), hi-vis pants (ANSI/ISEA 107 Class E), chemical and arc-rated garments, each with the standard in its Standards line.
Related guides
Coveralls vs overalls vs bib overallsThe differenceCoverall size chartHow to size work and disposable coverallsWhat are fire-resistant clothes made of?Treated cotton, inherent blends and the testsWhat does UPF 50+ mean on work clothing?And how it differs from SPFWhat is enhanced visibility clothing?And why it is not Class 1, 2 or 3Cold stressWhat OSHA and NIOSH recommendThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
