Skip to main content
Home › Guides › Hi-vis › Cleaning a hi-vis vest
Guide · Hi-vis · Care

Bayshore Safety & Industrial Supplies Guide

How do you clean a hi-vis vest? What the ML Kishigo care label says (machine wash cold, no bleach, tumble dry low, no iron), what 25X and 50X rated washes mean, washing a reflective vest without dulling the tape, drying, and when a vest is done

Wash it the way the label says and count the washes. ML Kishigo prints the same care line on nearly every spec sheet, "Machine Wash Cold, No Bleach, Tumble Dry Low, Do Not Dry Clean, Do Not Iron", and beside it a number of washes, 50X on most vests and T-shirts and 25X on jackets, hoodies, rainwear and the Cool Touch shirts, which is the count the fluorescent fabric and the retroreflective tape are tested to; after it the garment may still look fine, but Kishigo no longer stands behind the performance. The FR vests and shirts differ: "Air Dry Only" on all of them and "Machine Wash Warm" on the modacrylic shirts, because heat and bleach are what take an FR fabric’s rating. The four things that ruin a vest faster than the wash count are bleach (it kills the fluorescent pigment), a hot dryer or an iron (they dull or melt the glass-bead and prismatic tape), dry-cleaning solvents, and grease left in the fabric; the routine below avoids all four, and Kishigo’s garment inspection card says when a washed vest is still "acceptable" and when it is "unacceptable" and due for replacement.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026); ML Kishigo High-Visibility FAQ, Flame Resistant FAQ, Garment Inspection and About Us pages (kishigo.com, read Nov 12 2026)
ML Kishigo 1055 Safety Vest, Class 2 Type R, Orange, 2 Pockets, Zipper FrontML Kishigo 1055 Safety Vest, Class 2 Type R, Orange, 2 Pockets, Zipper FrontML Kishigo prints "Machine Wash Cold, No Bleach, Tumble Dry Low, Do Not Dry Clean, Do Not Iron" and 50X on the spec sheet

Why the label reads the way it does. A hi-vis garment is two tested materials, and each has an enemy. The fluorescent polyester is dyed with pigments that "appear brighter than other colors" by converting ultraviolet light; chlorine bleach strips them, hot water fades them, and sunlight does the same slowly over a season, which is why a vest left on a dashboard fades faster than one that is washed. The retroreflective tape is glass beads or microprisms on a backing; heat from a dryer on high or an iron deforms the layer and the band goes gray, and dry-cleaning solvent attacks the adhesive. Detergent and cold water hurt neither, which is why "Machine Wash Cold, No Bleach, Tumble Dry Low" is the whole instruction, and why the rated wash count assumes it was followed.

The routine, step by step

For a polyester mesh or solid hi-vis vest, shirt, jacket or rain garment with the standard Kishigo care label.

  1. Empty the pockets, close the zipper or the hook-and-loop so it does not snag the mesh or the tape, and turn the vest inside out.
  2. Pre-treat grease and oil with a dab of liquid detergent or dish soap worked into the spot; let it sit a few minutes. Skip solvent and skip bleach.
  3. Machine wash cold, gentle cycle, ordinary detergent, with other light-colored work clothes; no fabric softener, which coats the tape and the fluorescent fibers.
  4. Tumble dry low or hang to dry; never high heat. FR garments: air dry only, as the label says.
  5. Do not iron and do not dry clean. A wrinkled mesh vest hangs flat on its own.
  6. Count the wash toward the rated number (25X or 50X), and check the vest against the inspection card: vivid color and bright tape is acceptable, soiling and light fading is marginal, little visibility is unacceptable.
ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026)

What each care-label word means

The ML Kishigo spec-sheet wording and the reason behind it.

Machine Wash ColdCold water keeps the fluorescent pigment and the tape adhesive; the FR modacrylic shirts (F506, F709, F710) say "Machine Wash Warm" because the fabric tolerates it and warm water lifts oil better.
No BleachChlorine bleach strips fluorescent dye and attacks FR treatments; on a vest it is the fastest way to turn lime into a pale yellow that no longer meets the standard.
Tumble Dry LowLow heat leaves the glass-bead and prismatic tape alone; high heat dulls it. The FR garments say "Air Dry Only".
Do Not Dry CleanSolvents attack the tape backing and the pigments.
Do Not IronAn iron on the tape melts or flattens the reflective layer; polyester mesh does not need it.
25X and 50XThe number of washes the garment is tested to for its fluorescent and retroreflective performance. 50X on most vests and T-shirts, 25X on jackets, hoodies, rainwear, FR and Cool Touch shirts.

The questions, one by one

Answers from the ML Kishigo spec sheets, the inspection page and the FR FAQ.

How do you clean a reflective vest?

Cold machine wash, gentle, ordinary detergent, closed and inside out, no bleach, no softener, low or air dry, no iron, no dry cleaning. The reflective tape is the part most people worry about and the part the routine protects: it is the dryer heat and the iron that dull it, not the wash. ML Kishigo rates the tape and the fabric together for 25 or 50 washes on that routine.

Can you machine wash a safety vest, and can it go in the dryer?

Yes to both, within the label: machine wash cold and tumble dry low on every standard ML Kishigo garment. "Low" is the whole point; a hot dryer is what turns a bright band gray. The FR vests and shirts are the exception, "Air Dry Only".

How do you get stains and grease out of a hi-vis shirt?

Pre-treat with liquid detergent or dish soap rubbed into the spot, wait, then wash cold; repeat before drying, because heat sets what is left. Do not use bleach, acetone, brake cleaner or any solvent on the fabric; they take the pigment or the tape with the stain. A stain that will not lift after two tries on a vest that still reflects is a marginal vest, not a failed one; the inspection card grades visibility, not cleanliness.

How many times can you wash a hi-vis vest?

ML Kishigo prints the answer on each spec sheet: 50X on the 1055, 1513, S5004 and the T-shirts, 25X on the bombers, parkas, hoodies, rainwear, Cool Touch shirts and FR garments. That is the count the performance is tested to; a vest washed more often is still a vest, but the manufacturer no longer vouches for its class.

How do I clean 100 percent polyester mesh?

The same way: cold wash, low dry. Polyester does not shrink, holds its color in cold water and dries fast; mesh snags, which is why the vest goes in closed and inside out, and why a zipper vest outlasts a hook-and-loop one in the wash (the hook side catches the mesh of everything in the load).

Can hi-vis go in the dryer?

On low, yes, per the label; on high, the tape goes dull and the fluorescent fabric fades sooner. Hanging to dry costs nothing and is what the FR garments require anyway.

How do I wash an FR hi-vis vest?

As Kishigo prints it for each style: the FM389, FM410 and F442 vests "Machine Wash Cold, No Bleach, Air Dry Only, Do Not Dry Clean, Do Not Iron"; the F506, F709 and F710 shirts "Machine Wash Warm, No Bleach, Air Dry Only". Kishigo’s FR FAQ: "Every garment that Kishigo sells includes a care label. Follow instructions carefully to maximize the life of your garment." The FR washing guide linked below has the full set of rules for arc-rated clothing.

How long does a safety vest last, and when is it done?

Until it fails the inspection or passes its rated washes, whichever comes first. Kishigo’s inspection card: "acceptable" is "vivid color contrast and high reflectivity"; "marginal" is "good reflectivity although the product has some soiling and light fading"; "unacceptable" is "little visibility and safety for the user". A faded vest with bright tape is marginal; a vest whose tape no longer lights up in headlights is done. The how-long-does-hi-vis-last guide linked below has the signs.

Does washing a vest make it less reflective?

Following the label, not within the rated count; that is what the count means. Bleach, heat, softener and solvent do, and so does abrasion, which is why a vest worn under a harness or a backpack strap wears its tape at the shoulders first.

In plain words

  • Cold wash, no bleach, low or air dry, no iron, no dry cleaning: the ML Kishigo label, word for word.
  • Count the washes: 50 on most vests and T-shirts, 25 on jackets, rainwear, hoodies and FR.
  • Heat and bleach are what ruin a vest, not the wash.
  • Check it against the inspection card: vivid and bright is fine, faded and dull is done.
ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026)

Questions people ask

Can I bleach a yellow safety vest?

No; ML Kishigo prints "No Bleach" on every spec sheet, because chlorine strips the fluorescent pigment and the vest no longer meets its class.

What temperature do you wash hi-vis at?

Cold, per the label on the standard garments; the FR modacrylic shirts say warm.

Can you iron a hi-vis vest?

No; the label says "Do Not Iron", and an iron melts or flattens the reflective tape.

Can you dry clean a safety vest?

No; the label says "Do Not Dry Clean", because the solvents attack the tape and the pigment.

What does 50X mean on a vest?

Rated for 50 washes on the care routine; ML Kishigo prints 50X on most vests and T-shirts and 25X on jackets, rainwear, hoodies and FR.

How do I wash a hi-vis jacket?

The same cold wash and low dry as a vest; the ML Kishigo bombers, parkas and rain jackets are rated 25 washes.

Why did my vest turn pale?

Bleach, hot water, a hot dryer or a season of sun; faded fluorescent fabric is what the inspection card calls marginal, and it is replaced when it reaches unacceptable.

Does fabric softener hurt hi-vis?

Yes; it leaves a coating on the fluorescent fibers and the reflective tape that dulls both, so leave it out of the wash.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need vests, shirts or jackets in a specific class or color?Call (925) 215-7337 or email us the crew size and the class the site asks for. We stock yellow-green and orange in every class and imprint logos on both. We sell nationwide.
Hi-vis selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.