Bayshore Safety & Industrial Supplies Guide
What is retroreflective tape? How the silver tape on a hi-vis vest works, fluorescent fabric vs retroreflective material, the grades of tape and what ANSI/ISEA 107 asks of it, making clothing reflective, glow in the dark, and DOT-C2 tape
Retroreflective tape is the silver (or white, orange or yellow) band on a hi-vis garment that sends light back toward its source instead of scattering it, so a driver whose headlights hit the band sees it bright from the driver’s seat. ML Kishigo’s FAQ puts it this way: retroreflective materials "are designed to return light in the direction of the light’s source, so that they will appear bright to a driver or machine operator when illuminated by a vehicle’s headlights or other source of light", and they "are added to HVSA in specific patterns, to provide visibility in low light, especially at night". The tape is one of the two materials ANSI/ISEA 107 grades a garment on; the other is the fluorescent background fabric that works by day. Two technologies make the tape: glass beads, the common silver band, and microprisms, which Kishigo uses as Oralite prismatic tape on its Storm Stopper Pro rainwear because it "performs exceptionally well under wet conditions, and provides additional durability over silver glass beaded reflective materials". The guide below covers the grades, the widths, what the standard asks of the tape, why you cannot make a Class 2 vest with a roll of tape, and why the tape on a truck or a warehouse floor is a different product.
ML Kishigo RWJ100 Hi Vis Rain Jacket, Class 3 Type R, Lime, Zipper FrontML Kishigo prints Oralite prismatic reflective tape and a Type R Class 3 label on the Storm Stopper Pro rain jacketFluorescent by day, retroreflective by night. Kishigo’s FAQ separates the two materials a hi-vis garment is made of. Fluorescent fabrics "use special pigments to appear brighter than other colors, and enhance daytime visibility, especially in low light such as cloud cover, dusk, dawn"; the standard "specifies minimum performance characteristics for fluorescent yellow-green, orange-red and red background materials". Retroreflective materials do the night job. A third kind, combined-performance material, is fluorescent and retroreflective at once; Kishigo prints "2 in. wide Oralite combined performance prismatic reflective material" on its 1197 and 1198 vests. ANSI/ISEA 107 sets minimum areas of each material by class, requires the bands to give 360-degree visibility, and requires "balance of design, so that the front and back of a garment each has no less than 40% of the minimum required area". The MUTCD 6C.05 adds the color rule for roadways: "the retroreflective material shall be orange, yellow, white, silver, yellow-green, or a fluorescent version of these colors".
The tapes, by what ML Kishigo prints
Each description is the manufacturer’s statement on the product page or spec sheet.
The questions, one by one
Answers from the ML Kishigo pages, the MUTCD and the standard as the byline names them.
What is retroreflective tape, and how is it different from reflective?
A mirror reflects light away at the matching angle; a retroreflector sends it back where it came from. Tape made of glass beads or microprisms does the second, which is why a vest lights up for the driver whose headlights are on it and looks dull to someone standing beside the car. "Reflective tape" in everyday speech means retroreflective tape; the standard and Kishigo use the full word.
What are the grades of reflective tape?
For garments there are two technologies, glass bead and microprismatic, and the standard grades the material by its measured retroreflection (how much light comes back at set angles) and its performance after washing, abrasion, flexing and rain, with a tested minimum for garment use. Kishigo prints which technology it used (silver glass bead on most vests, Oralite prismatic on the Storm Stopper Pro) and the rated washes the garment passed. Grades named for vehicles and signs (engineer grade, high-intensity, diamond grade) are a different product family.
How does reflective fabric work?
Glass-bead tape: each bead is a tiny lens that focuses light onto a mirrored layer behind it, which sends the light back through the bead toward the source. Prismatic tape: rows of microscopic corner-cube prisms bounce the light off three faces and return it. Both are bonded to a fabric or film backing and sewn to the garment in the bands the standard requires.
Do hi-vis vests glow in the dark?
No. Fluorescent fabric needs daylight or ultraviolet light to look bright, and retroreflective tape needs a light source aimed at it; neither stores light the way a glow-in-the-dark pigment does. A vest in an unlit lot with no headlights on it is as dark as any shirt, which is why the MUTCD requires a lit flagger station at night and Cal/OSHA 1599(e) requires the station to be illuminated.
How can I make my clothing reflective?
Sew-on and iron-on retroreflective trim exists, and it will make a jacket show up in headlights. What it will not do is make the jacket a Class 2 or Class 3 garment: the class depends on tested materials in the areas and placements the standard sets, on a fluorescent background fabric, and on a label and a Declaration of Conformity from the manufacturer. Where a class is required, buy the labeled garment; where it is not (a walk at night), the trim is fine.
Can reflective tape be used on concrete or a floor?
Garment tape cannot; it is a sewn fabric with no adhesive. Floor-marking and anti-slip reflective tapes are a different product, made for the surface, and a concrete floor needs the one made for it. The tape on a hi-vis vest is for the vest.
What are the DOT regulations for reflective tape on trucks and trailers?
A vehicle rule, not a garment one: the federal motor vehicle safety standard on lighting requires conspicuity tape on trailers and truck tractors of certain sizes, in red and white, and the tape is marked DOT-C2 (or C3, C4) with the manufacturer’s name. It is a different product from garment tape, graded for a vehicle’s life outdoors, and we do not sell it; ask a truck-equipment supplier. Putting it on a car is a question for the state vehicle code.
What is DOT-C2 reflective tape?
The marking on conspicuity tape that meets the federal vehicle lighting standard; "C2" is the 2 in. width class, with C3 and C4 for narrower strips used in combination. It is vehicle tape and has nothing to do with the ANSI/ISEA 107 label on a vest.
What is the strongest, or brightest, reflective tape?
Prismatic tape returns more light than glass-bead tape at the angles the standard tests, which is why Kishigo chose Oralite prismatic for its rain gear and prints that it "performs exceptionally well under wet conditions". For a garment the question is whether the material passed the standard’s test, which any labeled Class 2 or 3 garment’s tape has; a brighter tape on an unlabeled jacket does not make it hi-vis.
Can I iron, wash or clean reflective fabric?
Wash as the care label says (Kishigo prints "Machine Wash Cold, No Bleach, Tumble Dry Low, Do Not Dry Clean, Do Not Iron"); an iron on the tape dulls or melts the bead or prism layer. The cleaning guide linked below has the routine, and the rated washes on the spec sheet are the number of washes the tape is tested to.
In plain words
- Retroreflective tape sends headlights back toward the driver; fluorescent fabric is the daytime half. A hi-vis garment needs both, in the areas ANSI/ISEA 107 sets.
- Two technologies: glass bead (the silver band) and prismatic (Oralite on the Kishigo Storm Stopper Pro). Both are tested for garment use and rated for washes.
- Nothing glows in the dark; a vest needs light on it, which is why night flagger stations are lit.
- Tape sewn onto a jacket makes it visible, not Class 2; DOT conspicuity tape and floor tape are different products.
Questions people ask
What does retroreflective mean?
That light is returned toward its source rather than scattered; a driver whose headlights strike the tape sees it bright. ML Kishigo’s FAQ uses the same definition.
What is reflective tape on a vest made of?
Glass beads over a mirrored layer, or microscopic prisms (Oralite prismatic on the Kishigo Storm Stopper Pro), bonded to a fabric backing and sewn in bands.
How wide is the tape on a safety vest?
2 in. on most ML Kishigo vests; the public safety vests use two 1 in. bands. The standard sets minimum areas and widths by class.
Does reflective tape wear out?
Yes, with washing and abrasion; ML Kishigo rates each garment for 25 or 50 washes and its inspection card grades a vest unacceptable when the tape no longer reflects.
Can I add reflective tape to make a vest Class 3?
No; the class comes from tested materials in the standard’s areas and a manufacturer’s label and Declaration of Conformity, not from added trim.
What color can the tape be?
Under MUTCD 6C.05, orange, yellow, white, silver, yellow-green or a fluorescent version of these; silver is the common one, orange on some Kishigo styles.
Is DOT-C2 tape the same as vest tape?
No; DOT-C2 is the vehicle conspicuity tape the federal lighting standard requires on trailers, a different product we do not sell.
What is combined-performance material?
A strip that is fluorescent and retroreflective at once, counted toward both areas; ML Kishigo prints it on the 1197 and 1198 vests.
Related guides
What is hi-vis?How retroreflective material worksHow long does hi-vis clothing last?And when it should be replacedHow do you clean a hi-vis vest?The care label and the rated washesWhat are the levels of safety vests?Class 1, 2, 3 and E, Type R, O and PWho wears orange hi-vis, and what do the colors mean?Orange, yellow-green, blue, pink, red, white, blackHi-vis for flaggers and roadway workWhat the MUTCD requiresANSI/ISEA 107 High-Visibility Safety ApparelThe rule pageThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
