Skip to main content
Home › Guides › Hi-vis › Levels of safety vests
Guide · Hi-vis · The classes

Bayshore Safety & Industrial Supplies Guide

What are the levels of safety vests? Class 1, 2, 3 and E and Type R, O and P under ANSI/ISEA 107-2020, what counts as high-visibility clothing (HVSA), what Class 3 reflective clothing is, and class 2 vs class 3 in plain words

The "levels" of a safety vest are the performance classes of ANSI/ISEA 107-2020, the American National Standard for High-Visibility Safety Apparel: Class 1, Class 2 and Class 3, which ML Kishigo’s FAQ describes as depending "on the amount of visible background and retroreflective material", plus Class E for pants and gaiters that cannot be worn alone but raise a Class 2 top to a Class 3 ensemble. Alongside the class sits the type, which says where the garment may be used: Type R for roadway and temporary traffic control, Type O for off-road work with no traffic, Type P for public safety. A vest is labeled with both, and the label is what a site inspector reads: "ANSI/ISEA 107-2020 Type R Class 2" is the daytime roadway minimum under the MUTCD, Class 3 is what the MUTCD says a flagger should wear at night, and a vest with no label, however bright, is Non-ANSI. Every ML Kishigo garment we sell carries the type and class Kishigo prints, and the bands below sort the line by them.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · ML Kishigo High-Visibility FAQ, Flame Resistant FAQ, Garment Inspection and About Us pages (kishigo.com, read Nov 12 2026); ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026); MUTCD 11th Edition (FHWA, December 2023), Part 6, sections 6C.05, 6D.02 and 6D.03 (saved Nov 12 2026); 29 CFR 1926.201 Signaling (eCFR, saved Nov 12 2026); Cal/OSHA Title 8 sections 1598, 1599 and 3380 (dir.ca.gov, saved Nov 12 2026)
ML Kishigo 1513 Safety Vest, Class 2 Type R, Lime, 6 Pockets, Zipper FrontML Kishigo 1513 Safety Vest, Class 2 Type R, Lime, 6 Pockets, Zipper FrontML Kishigo labels it ANSI/ISEA 107 Type R Class 2: Premium Black Series heavy-duty vest, 6 pockets, zipper front, rated 50 washes

What the classes measure. ML Kishigo’s FAQ, which follows ISEA’s own wording, says the standard "classifies HVSA as Performance Class 1, 2 or 3, depending on the amount of visible background and retroreflective material", and describes each: "Performance Class 1 provides the minimum amount of required material to differentiate the wearer visually from non-complex work environments. Performance Class 2 includes additional amounts of high-visibility materials to allow design opportunities to define the human form more effectively. Performance Class 3 offers greater visibility to the wearer in both complex backgrounds and through a full range of body motions". The one figure Kishigo prints is for Class 2: 775 square inches of background material for every size but the smallest, which may use 540. The standard also requires 360-degree visibility and "balance of design, so that the front and back of a garment each has no less than 40% of the minimum required area". The class is a label the manufacturer earns through testing in an ISO 17025 laboratory and a Declaration of Conformity for each model; Kishigo’s FAQ says to ask for it when in doubt.

The levels, one by one

Each definition is ML Kishigo’s FAQ wording or the MUTCD; the examples are the Kishigo garments that carry the label.

Class 1The least material, "to differentiate the wearer visually from non-complex work environments". In 107-2020 Class 1 exists only as Type O (off-road); Kishigo’s B200 shirt and B310 hoodie are Type O Class 1.
Class 2The roadway minimum: 775 square inches of fluorescent background (540 for the smallest size) with retroreflective bands around the torso and over the shoulders. Most of the ML Kishigo vests, surveyor vests, breakaway vests and T-shirts are Type R Class 2.
Class 3The most material and "a full range of body motions", which means sleeves: long-sleeve shirts, jackets, sweatshirts, rain jackets and sleeved vests. The MUTCD says flaggers at night should wear it.
Class EPants, shorts, bibs and gaiters. Kishigo’s FAQ: they "cannot be worn alone to satisfy HVSA PPE requirements, but when worn with a Performance Class 2 or 3 garment, the ensemble classification is Performance Class 3".
Type RRoadway and temporary traffic control. The type the MUTCD and Cal/OSHA 1598 and 1599 are written around.
Type OOff-road: work with no exposure to public traffic, such as yards, warehouses and parking. Class 1 only.
Type PPublic safety: law enforcement, fire and EMS. The former ANSI/ISEA 207 vest, "incorporated into ANSI/ISEA 107 Standard as Type P", with a smaller minimum material area.
Non-ANSINo class. Kishigo’s Enhanced Visibility Series: vests and shirts in blue, pink, red, white or black, or with too little material for a class, for visitors and sites with no struck-by hazard.

The questions, one by one

Answers from the ML Kishigo FAQ, the MUTCD and the regulations named in the byline.

What are the levels of safety vests?

Class 1, Class 2 and Class 3, in that order of material, plus Class E for legwear. People also say "level" for the type (R, O, P), and sometimes for the color; neither is a level. A Class 2 Type R vest is the one most sites mean by "a safety vest", a Class 3 garment is the one with sleeves, and Class 1 is the small off-road vest that cannot be used on a roadway at all.

What is considered high-vis clothing?

In the standard’s words, HVSA: ML Kishigo’s FAQ says it "includes garments such as vests, jackets, pants, shirts, rainwear and coveralls that are designed and constructed to increase visibility of people working in hazardous situations under all light conditions", and that for Kishigo "HVSA refers to apparel and accessories that meet the requirements of ANSI/ISEA 107-2020". A bright shirt with no label is not HVSA under that definition, whatever it looks like.

What is the difference between Class 2 and Class 3 high-vis?

Area and coverage. Class 3 has more fluorescent background and more retroreflective material, placed so the wearer is visible "through a full range of body motions", which in practice requires sleeves or Class E pants. Class 2 is enough for the daytime roadway minimum in the MUTCD; Class 3 is what it says a flagger should wear at night. The class 2 vs class 3 guide linked below goes through the figures.

What is Class 3 reflective clothing?

Any garment labeled ANSI/ISEA 107 Performance Class 3: ML Kishigo’s Class 3 long-sleeve shirts, hoodies, bombers, parkas, soft shells, rain jackets and sleeved vests, and a Class 2 vest worn with Class E pants. The word "reflective" in the question is half the story; the class counts the fluorescent background as well as the retroreflective tape.

What is ANSI/ISEA 107-2020, and what did it change?

The current edition. Kishigo’s FAQ describes it as "the specific set of standards and guidelines that covers high-visibility safety apparel" and "a document for the design, performance or materials for high visibility PPE in the United States". The types (R, O, P) came in with the 2015 edition, which also folded the ANSI/ISEA 207 public safety vest in as Type P; the 2020 edition kept the types and the three classes, and ML Kishigo prints both editions together on its product pages ("ANSI/ISEA 107-2015 / ANSI/ISEA 107-2020 Type R | Class 2") for garments it labels to both.

What is Type R vs Type O vs Type P?

Where the garment may be worn: Type R on roadways and in temporary traffic control, Type O off-road where there is no public traffic, Type P for public safety responders who need identification panels and a tactical cut. The MUTCD requires Type R Class 2 or 3 in a work zone and lets law enforcement and responders wear Type P (ANSI/ISEA 207) instead; the Type R vs O vs P guide linked below has the detail.

Which level do I need for my job?

On a roadway or in a temporary traffic control zone: Type R Class 2 by day, Class 3 for flaggers at night (MUTCD 6C.05), and in California any employee on foot exposed to vehicular traffic (Cal/OSHA 1598(c)). In a yard, plant or warehouse with vehicle traffic: what the employer’s hazard assessment under 1910.132(d) selects, usually Class 2. Off-road with no traffic: Type O Class 1 is allowed. Public safety: Type P. The OSHA guide linked below has the rules in order.

Is a Class 2 vest with Class E pants the same as a Class 3 jacket?

For the label, yes: Kishigo’s FAQ says the ensemble "is Performance Class 3", and "no other combination of HVSA changes a classification". For the work, the jacket covers the arms and the ensemble covers the legs; a night flagger who signals with his arms is better seen in sleeves, which is why the sleeved garment is the usual choice.

What is an appropriate warehouse hi-vis level?

Whatever the hazard assessment finds, and the usual answer is Type R Class 2 where forklifts and trucks move among people, or Type O Class 1 where there is no public traffic. ML Kishigo lists "Warehouse / Logistics" among the industries for its Class 2 mesh vests and its Type O Class 1 shirt and hoodie.

In plain words

  • Class 1, 2 and 3 are the levels: more fluorescent and reflective material at each step. Class E is pants that lift a Class 2 top to Class 3.
  • Type R is roadway, Type O is off-road, Type P is public safety. The label carries both.
  • The roadway minimum is Type R Class 2 by day; the MUTCD says flaggers at night should wear Class 3.
  • A vest with no ANSI/ISEA 107 label has no level, whatever its color. ML Kishigo labels those Non-ANSI.
ML Kishigo High-Visibility FAQ, Flame Resistant FAQ, Garment Inspection and About Us pages (kishigo.com, read Nov 12 2026); MUTCD 11th Edition (FHWA, December 2023), Part 6, sections 6C.05, 6D.02 and 6D.03 (saved Nov 12 2026)

Questions people ask

How many classes of safety vest are there?

Three performance classes, 1, 2 and 3, plus Class E for pants and gaiters, under ANSI/ISEA 107-2020; the type (R, O or P) is a separate mark on the same label.

What class of vest is required on a road?

Type R Class 2 or 3 for everyone within the right-of-way in a temporary traffic control zone, under MUTCD 6C.05; flaggers at night should wear Class 3.

What is a Class E vest?

There is none; Class E is pants, shorts, bibs and gaiters, which count only when worn with a Class 2 or 3 top, making the ensemble Class 3.

Is Class 3 better than Class 2?

It carries more material and covers the arms, so it is required where the standard and the MUTCD ask for it; where Class 2 is the requirement, both satisfy it.

What does Type R mean on a vest?

Roadway: the garment may be worn in temporary traffic control and anywhere public traffic is the hazard; Type O is off-road only and Type P is public safety.

What is a Non-ANSI vest?

A garment with no ANSI/ISEA 107 class, usually because its color or area does not meet the standard; ML Kishigo sells them as its Enhanced Visibility Series for visitors and non-traffic sites.

Does ANSI/ISEA 107-2020 replace 107-2015?

It is the current edition, with the same three classes and three types; ML Kishigo prints both editions on the product page for garments it labels to both.

Where is the class printed?

On the sewn-in label, which must show the type and performance class, and on the manufacturer’s Declaration of Conformity for the model, which Kishigo’s FAQ says to ask for.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need vests, shirts or jackets in a specific class or color?Call (925) 215-7337 or email us the crew size and the class the site asks for. We stock yellow-green and orange in every class and imprint logos on both. We sell nationwide.
Hi-vis selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.