Bayshore Safety & Industrial Supplies Guide
Do waterproof gloves work? What waterproof means on a work glove, full-dip PVC and nitrile vs membrane liners vs water-resistant leather, whether thermal and neoprene gloves are waterproof, how to make gloves waterproof, and how winter gloves fit
Waterproof gloves work when "waterproof" means a continuous barrier and fails when it means a treated surface. Three constructions exist. A fully dipped PVC, nitrile or latex glove (Liberty Safety’s double-dipped PVC gauntlets, its fully coated nitrile 9460SP and 9430) is a seamless rubber skin over a knit liner and is liquid-proof to the cuff for as long as the skin is intact; it is the glove for wet work, and the insulated version (the 2524, "fully coated, foam insulated, 14 inch gauntlet") is the glove for wet cold. A glove with a waterproof membrane sewn in as a liner (Liberty’s 3656, "premium select shoulder split leather, waterproof lining") keeps water off the hand while the shell soaks, so it is warm and dry inside and heavy outside; it is a winter glove, not a wash-down glove. A leather, knit or "thermal" glove with no barrier is water-resistant at most: leather sheds a splash and then soaks, and a palm-only coating on a knit keeps the palm dry and the back wet. The European EN 511 rating prints the answer as a digit: the third number is water penetration, 1 if no water reached the inside in the immersion test and 0 if it did. No US standard rates it, so the construction on the product page is what to read.
Liberty Safety 2524 Chemical Resistant Gloves, PVC Coated, 14 in, OrangeLiberty Safety prints fully coated PVC, foam insulated, 14 inch gauntlet, orange; sold by the dozenHow water gets into a glove. Through the material (a knit, a woven, an untreated hide), through the seams (every sewn glove has stitch holes), and over the cuff. A dipped glove has no seams and no porous material, so only the cuff is left, which is why wet-work gloves are sold in 12, 14 and 18 inch lengths. A membrane glove closes the material and the seams of the liner but not the shell, so the outside gets heavy and cold while the inside stays dry. A treated leather or a palm coating slows the first route and does nothing for the other two. That is the whole physics of "do waterproof gloves work": the construction decides, and the manufacturer prints the construction.
What OSHA says. 29 CFR 1910.138 lists "harmful temperature extremes" and "skin absorption of harmful substances" among the hazards that require hand protection selected on "an evaluation of the performance characteristics of the hand protection relative to the task(s) to be performed, conditions present, duration of use". Wet cold is a temperature extreme made worse by water, so the performance characteristic to evaluate is the barrier; the cold-stress guide linked below has the NIOSH and OSHA cold-work guidance. Gloves "used solely for protection from weather" are the one hand-protection item the employer-payment rule (1926.95(d)(4) and 1910.132(h)) excepts, which is why a crew’s winter gloves are often the worker’s own and the wet-work PVC gloves the company’s.
The three constructions, and what each one actually does
Each construction statement is the manufacturer’s; the EN 511 digit is as explained in the cold-weather glove guide.
The questions, one by one
Each answer uses the manufacturers’ construction statements and the regulations named in the byline.
Do waterproof gloves work?
A dipped glove and a membrane-lined glove do, each in its own way: the dipped glove keeps all liquid out until the skin is cut or worn, the membrane glove keeps the hand dry while the shell soaks. What does not work is the expectation that a treated leather or a palm-coated knit is waterproof; those are water-resistant and are sold as such when the manufacturer is careful. The test on the page is simple: if the product statement says "dipped", "fully coated" or "waterproof lining", it is a waterproof glove; if it says "water-resistant", "treated" or names only a palm coating, it is not.
Are there any truly waterproof gloves?
Yes: the fully dipped PVC, nitrile and latex gloves are truly waterproof to the cuff, because they are a continuous rubber skin with no seams. The fishing, wash-down and chemical trades have used them for decades for that reason. The catch is that nothing truly waterproof breathes, so the hand sweats inside; the fix is a thin cotton liner glove (Liberty 4401Q or a 13 gauge knit) changed when damp. A membrane glove is truly waterproof on the inside and not on the outside.
How to make gloves waterproof, and how to make non-waterproof gloves waterproof?
You cannot make a knit or a sewn leather glove truly waterproof; the stitch holes and the fiber remain. What you can do: wax or oil a leather glove so it sheds water longer (it will still soak in rain and dry stiff); wear a thin nitrile disposable or a dipped overglove over a knit (the overglove is the barrier, the knit the insulation); or buy the construction that is waterproof in the first place, which costs less than ruining a leather glove with the wrong treatment. Spray-on water repellents on fabric gloves give a short-lived surface effect only.
Are thermal gloves waterproof?
Not unless the page says so. "Thermal" describes the insulation (an acrylic thermal knit, a fleece, foam, Thinsulate); it says nothing about water, and most thermal knits are water-resistant at the palm only. Liberty Safety’s Arctic-Tuff gloves are "7 gauge acrylic thermal shell" with a latex or foam-latex palm coating: warm, grippy, and wet on the back in rain. The thermal gloves that are waterproof are the foam-insulated dipped PVC (2524) and the membrane-lined leather (3656), and their pages say so.
Are neoprene gloves waterproof?
A dipped neoprene chemical glove is; a foam neoprene diving or sport glove is not and is not meant to be (it holds a warm layer of water against the skin). For work in cold water the dipped, insulated PVC or neoprene glove is the one; the neoprene guide linked below covers what the chemical glove resists.
How to fit winter gloves, and how to pick winter gloves?
Measure the hand the way the glove size guide linked below describes (tape around the knuckles, thumb excluded; the inch figure is the numeric size, 9 inches is a size 9 or large) and then, for an insulated glove, do not size down: a winter glove works by trapping air in its insulation, and a glove pulled tight compresses the insulation and the blood flow at once, which is the fastest way to cold fingers. The right fit has the fingertips just short of the ends with a thin liner on, the palm free to close, and the cuff over the jacket cuff. Pick by the three EN 511 questions whether the code is printed or not: cold air (wind), cold contact (steel, frozen product), and water; then the grip (a coated palm for wet, leather for dry handling) and the dexterity the task needs (a 13 gauge knit for tools, a mitt-weight chore glove for a shovel).
What are the warmest winter gloves, and which winter gloves are the warmest for men or women?
The warmest glove is the one with the most dry insulation, and the manufacturers rank their own insulations; the warmest-insulation guide linked below has MCR Safety’s ranking. On the Liberty Safety line the deerskin 6958 and cowhide 8544 and 6518-class drivers are "3M Thinsulate lined", the 6227, 6217, 6837 and 7217 are fleece-lined grain leather, the 3656 is a waterproof-lined cowhide, and the F4783HV is a 13 gauge polyester shell over a 10 gauge acrylic thermal lining. Men’s and women’s versions differ in size, not insulation; the average-glove-size guide linked below has the women’s sizing.
What are good waterproof gloves for winter?
For wet cold: the foam-insulated fully coated PVC (Liberty 2524, 14 inch gauntlet) for slush, wash-down and cold water; the membrane-lined leather (3656) for snow and handling wet material; a jersey-lined PVC (2633, 2733, I2434) where the cold is moderate and the wet is constant. For dry cold with occasional damp, an Arctic-Tuff coated knit. Add a liner to any of them and change it at lunch.
Which winter liner gloves, and do glove liners make a difference?
The manufacturers do not rank liners and neither do we; what a liner does is measurable. A thin knit or cotton liner under an outer glove adds a dead-air layer (warmth), takes the sweat so the outer glove’s insulation stays dry (more warmth, less smell), and lets the outer glove come off for a fine task while the hand stays covered. A liner that is too thick for the outer glove compresses the insulation and does the opposite. The glove-liner guide linked below has the liner types.
How do you wash winter gloves?
By the shell: dipped PVC and nitrile gloves rinse and hang; coated knits machine wash warm on gentle and air-dry open; leather is hand-washed cool and air-dried slowly, then conditioned. Insulation dries slowly and clumps in heat, so hang them cuff-up for a day. The work-glove cleaning guide linked below has the routine for each construction.
At what point does OSHA require insulated gloves?
OSHA has no temperature trigger. 1910.138 requires hand protection where hands are exposed to "harmful temperature extremes", selected on the task, the conditions and the duration; the cold-stress guidance OSHA and NIOSH publish (the cold-stress guide linked below) describes when cold becomes a hazard, and the employer’s hazard assessment under 1910.132(d) decides the glove. Gloves worn solely against the weather are excepted from the employer-payment rule; gloves required by the assessment are not.
In plain words
- Waterproof means a continuous barrier: a fully dipped PVC, nitrile or latex glove (liquid-proof to the cuff) or a membrane lining (dry inside, wet outside).
- Leather, palm-coated knits and "thermal" gloves are water-resistant at most. The page says "dipped", "fully coated" or "waterproof lining" when it is waterproof.
- EN 511’s third digit is water penetration: 1 passed, 0 did not, X not tested.
- You cannot make a knit or sewn glove waterproof; wear a dipped overglove or buy the dipped construction.
- Fit an insulated glove loose enough that the insulation is not crushed: fingertips just short, palm free, cuff over the jacket.
- A thin liner adds warmth, takes the sweat and lets the outer glove come off for a fine task.
- OSHA has no temperature trigger; the hazard assessment decides, and weather-only gloves are excepted from the payment rule.
More questions people ask
Are waterproof gloves actually waterproof?
Only the ones tested for it, and the EN 511 code says which. The third position is water penetration, 0 or 1: Armor Guys’ catalog reads it "1 = no water penetration". Its 00-849WP and 00-869WP Kyorene Pro winter gloves carry X21 and a waterproof statement; its other winter styles carry X2X, meaning the water test was not performed, and a micro-foam nitrile palm on its own is not a waterproof claim.
Answers from the sources named in the byline; Armor Guys figures from the manufacturer’s product pages, spec sheets, catalog C.009 and workbook C.010 read Nov 12 2026.Questions people ask
Do waterproof gloves work?
Dipped PVC, nitrile and latex gloves and membrane-lined gloves do; treated leather and palm-coated knits are only water-resistant.
Are there any truly waterproof gloves?
Fully dipped gloves are waterproof to the cuff; they do not breathe, so wear a thin liner.
How do you make gloves waterproof?
You cannot make a knit or sewn glove waterproof; wax leather to shed water longer, wear a dipped overglove, or buy a dipped glove.
Are thermal gloves waterproof?
Only if the page says so; thermal describes the insulation. Arctic-Tuff knits are warm with a latex palm, not waterproof.
Are neoprene gloves waterproof?
A dipped neoprene chemical glove is; a foam neoprene sport glove is not.
How should winter gloves fit?
Loose enough not to crush the insulation: fingertips just short with a liner on, palm free, cuff over the jacket.
What does the EN 511 water digit mean?
The third digit: 1 means no water reached the inside in the immersion test, 0 means it did, X not tested.
What are good waterproof gloves for winter?
Foam-insulated fully coated PVC for slush and cold water; membrane-lined leather for snow; jersey-lined PVC for moderate cold and constant wet.
Do glove liners make a difference?
Yes: a thin liner adds a dead-air layer, takes the sweat, and lets the outer glove come off for a fine task.
How do you wash winter gloves?
Dipped gloves rinse and hang; coated knits wash warm and air-dry; leather is hand-washed and conditioned; dry insulation slowly.
At what point does OSHA require insulated gloves?
No temperature trigger; 1910.138 covers harmful temperature extremes and the hazard assessment decides.
Which Liberty Safety gloves are waterproof?
The dipped PVC gauntlets, the fully coated nitrile 9460SP and 9430, the foam-insulated PVC 2524, and the waterproof-lined cowhide 3656.
Related guides
Cold-weather work glovesWhat the EN 511 ratings meanWhat is the warmest insulation for work gloves?Fleece, foam, acrylic, wool and ThinsulateHard hats for cold weatherWinter liners and what they do to fitCold stressWhat the rules and NIOSH sayHow to measure your hand for glove sizeTape at the knuckles, thumb excludedWhat is the average glove size for a woman?Hand measurements and the size chartsWhen should you use neoprene gloves?What neoprene resistsHow do you clean work gloves, and how often should you replace them?Coated, cotton, leather and gardening glovesWhich gloves for handling extremely cold materials?Contact cold under EN 511 and what temperature calls for glovesThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
