Skip to main content
Home › Guides › PPE program and OSHA basics › Liberty Safety questions
Guide · PPE program and OSHA basics · The Liberty Safety line

Bayshore Safety & Industrial Supplies Guide

Liberty Safety questions answered: who makes Liberty Safety gloves and where, the line names (X-Grip, FLX, DayBreaker, DuraSkin, HiVizGard, DuraWear, DuraShell, DuraPlugs, iNOX, PolyGard, PermaGard, ProGard), the size chart, Prop 65 and where to buy

Liberty Safety is a privately held personal protective equipment manufacturer headquartered in City of Industry, California, that "started exclusively as a safety glove manufacturer" in 1987 and now describes itself as "a full-service, head-to-toe provider of personal protective equipment", selling through distributors from four warehouses in California, Ohio, Texas and Georgia. Its products are made to its specifications at factories it names on each product page by country of origin (China, Pakistan, Bangladesh, Indonesia, Ethiopia, Malaysia and Taiwan on the pages we carry), which is the usual arrangement for a US glove brand. The line names are what confuse people, because each is also a word that means something else: X-Grip (cut gloves), FLX (coated knits), DayBreaker (impact gloves), Arctic-Tuff (winter), ECODEX (Air-Urea coated gloves), Lightning Gear (mechanics), DuraSkin and BioSkin (disposables), HiVizGard (hi-vis), DuraWear (rainwear, boots, aprons, hairnets), DuraShell (hard hats), DuraPlugs (ear plugs), iNOX, BrandX and MACK Fender (eyewear), DuraMask (respirators), PolyGard, PermaGard, ProGard and PureGard (disposable apparel by fabric), APA (bouffants) and GardTex (sleeves). We are a stocking distributor of the line; we sell nationwide.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · Liberty Safety product pages, spec sheets, category pages and About page (libertysafety.com, read Nov 11 2026); the California Proposition 65 warning as printed on Liberty Safety’s leather glove pages
Liberty Safety X-Grip PRO F4910 Cut Resistant Gloves, ANSI A4Liberty Safety X-Grip PRO F4910 Cut Resistant Gloves, ANSI A4Liberty Safety prints X-Grip PRO, ANSI/ISEA 105 A4, abrasion 4, puncture 3, EN 388 4X41D, 21 gauge, microfoam nitrile palm; sold by the dozen

Who Liberty Safety is, in its own words. From the company’s About page: "In 1987, our company started exclusively as a safety glove manufacturer. Since then, we have evolved into a full-service, head-to-toe provider of Personal Protective Equipment (PPE)"; "as a value-priced PPE supplier, our product offering is chosen with consistent quality and comfort in mind"; "by leveraging our four warehouse distribution centers (California, Ohio, Texas, and Georgia), we can meet distributors’ product demands"; "we are headquartered in City of Industry, CA". The company sells to distributors, offers "private labeling, custom packaging, drop shipments" to high-volume ones, and has no public where-to-buy page; its quote form routes end users to a "preferred distributor". That is us for the customers who find the line here.

What the ratings on a Liberty page are. Liberty Safety prints the same ratings any US glove manufacturer prints and nothing it has not tested for: ANSI/ISEA 105 cut (A1 to A9), abrasion and puncture levels; ANSI/ISEA 138 impact levels; EN 388 codes; ANSI/ISEA 107 class on hi-vis; Z87.1+ on eyewear; Z89.1 Type and Class on hard hats; NRR on plugs; FDA food-contact statements on disposables; mil thickness; fabric weight in grams on disposable apparel. Each rating on our product pages is copied from the Liberty page or spec sheet for that item, with the source named, and the guides on this site put them beside the other manufacturers’ figures for the same kind of glove. Where Liberty prints no rating (cotton gloves, leather drivers, most winter gloves) our page prints none.

The lines, decoded

Each description is from Liberty Safety’s category and product pages.

X-Grip, X-Grip PRO, X-Grip LTECut-resistant knit gloves: HPPE and engineered-yarn shells, 13 to 21 gauge, polyurethane, nitrile, microfoam and sandy nitrile palms, ANSI A2 to A6, EN 388 codes printed. PRO is the premium shell and coating, LTE the economy version. ZETTACUT is the A7 to A9 end.
FLX and FLX LTECoated seamless gloves: 13 gauge polyester or nylon with an "ultra-thin polyurethane" or nitrile palm (FLX), 10 and 13 gauge cotton/polyester or nylon with a textured latex palm (FLX LTE). The general-purpose coated work glove, EN 388 printed, by the dozen.
DayBreakerImpact gloves with thermoplastic rubber (TPR) back-of-hand protection, ANSI/ISEA 138 levels 1 and 2 printed, many with an A2 to A7 cut level; Liberty’s category page cites a 42 percent share of acute hand injuries from impact.
Arctic-Tuff, DuraSkin, BioSkin, Lightning Gear, ECODEXArctic-Tuff: 7 gauge acrylic thermal knits with latex or nitrile palms for cold. DuraSkin: industrial-grade disposable nitrile, latex, vinyl and polyethylene by the box; BioSkin: examination grade. Lightning Gear: mechanics gloves with a synthetic leather palm. ECODEX: cut gloves with Liberty’s "Air-Urea" coating, sold on a lower environmental footprint.
HiVizGard and the Tech SeriesHi-vis vests, shirts, jackets, pants and rain gear with the ANSI/ISEA 107 class printed (Class 2, Class 3, Class E) and non-ANSI accessories; "black-bottom designs that help garments stay cleaner longer"; the Tech Series adds prismatic tape, mesh linings and heavier fabrics.
DuraWear, DuraShell, DuraPlugs, DuraMaskDuraWear: PVC and PU rainwear, boots, aprons, sleeves, hairnets and beard covers, cooling towels, knee pads and back belts. DuraShell: HDPE hard hats (Type I, Class G, E, C) and bump caps. DuraPlugs: foam ear plugs, NRR 25 and 32. DuraMask: disposable respirators.
iNOX, BrandX, MACK FenderEyewear: iNOX is the value line ("a cost-effective solution"), BrandX the premium line ("unmatched durability and clarity"), MACK Fender the sun-style line; all printed Z87.1+.
PolyGard, PermaGard, ProGard, PureGard, APA, GardTexDisposable apparel by fabric: PolyGard is spunbonded polypropylene (dry particles), ProGard is SMS (particles and light splash), PermaGard is microporous film over polypropylene (liquid splash), PureGard is polyethylene film over polypropylene; APA is the bouffant-cap brand; GardTex the cut-resistant sleeves. The coverall fabric guide linked below has what each fabric is tested for.

The questions, one by one

Each answer uses Liberty Safety’s own pages and the product records.

Who makes Liberty Safety gloves, and where are they made?

Liberty Safety (Liberty Glove and Safety, City of Industry, California) designs and specifies them and has them made at factories abroad, as nearly every US glove brand does; the country of origin is printed on each product page and copied to ours: the cotton and jersey gloves in Pakistan and Bangladesh, the string knits in Indonesia, the leather gloves in China, Pakistan and Ethiopia, the coated and cut gloves in China, the disposables in Malaysia, the ear plugs in Taiwan, the hi-vis and rainwear in China. Liberty is a US company and a US brand, not a US factory.

What is PermaGard used for, and is PermaGard good?

Two different products share the name. Liberty Safety’s PermaGard is a disposable apparel fabric, microporous film laminated to spunbonded polypropylene ("MPF over SBPP", 50 to 63 g), made into coveralls, lab coats, aprons, sleeves, hoods, shoe and boot covers for liquid-splash and particulate work, with serged seams; it is the liquid-barrier fabric in Liberty’s range, between the polypropylene PolyGard and SMS ProGard (particles) and a laminated chemical suit. The other PermaGard is a paint-protection coating for vehicles, sold by a different company, which is what most "how long does Permagard last" questions mean. Whether the apparel is good for a job is a question of what it is tested for, which the coverall fabric guide linked below lays out fabric by fabric.

Who sells FLX brand clothing, and is FLX only sold at one store?

Three different FLX brands exist: Liberty Safety’s FLX coated work gloves (which we sell), an athletic-apparel label sold through one department store chain, and a cryptocurrency token. The glove is the one in the band below; the clothing label is not a safety product and we do not carry it.

What does the Prop 65 warning on Liberty Safety leather gloves mean?

Liberty Safety prints on its leather glove pages: "WARNING: Risk of Cancer from Chromium Exposure. For more information go to www.P65Warnings.ca.gov". Proposition 65 is California’s Safe Drinking Water and Toxic Enforcement Act of 1986, which requires a warning on products sold in California that contain a chemical on the state’s list above a threshold; chromium compounds are on the list, and nearly all work-glove leather is chrome-tanned, so the warning appears on leather gloves from most manufacturers. It is a California notice, not a ban, a recall or a finding that the glove is unsafe to wear; it applies to products sold into California whatever the buyer’s state, which is why the warning is printed everywhere. Our product pages carry the same warning where Liberty prints it.

Is Prop 65 only in California, and why is it everywhere?

The law is California’s and the warning is required for sales into California; because manufacturers do not print two labels, the same warning ships to every state, which is why a buyer in Ohio sees it. It is everywhere because the chemical list is long (over 900 substances) and the threshold is low, so leather, brass, PVC, foam and most electronics carry one. It tells you the state has listed a chemical in the product; it does not tell you how much or whether it matters for the use.

What is the Liberty Safety glove size chart?

Liberty prints sizes on each glove page in letters with the numeric size in parentheses: XS (6), S (7), M (8), L (9), XL (10), 2XL (11), and on some lines 3XL (12); the number is the hand circumference in inches around the knuckles, thumb excluded, which is how the glove-size guide linked below measures it. Cotton and leather gloves often come in Men’s and Ladies’ (a ladies’ glove is about a size 7); hi-vis garments run M to 5XL or 7XL; coveralls M to 6XL with the sizing on the coverall size chart guide. Every size a page carries is listed on our product page for it.

Is Liberty Safety a good brand, and how does it compare with the other lines you carry?

We do not rank manufacturers, and no brand is "the best"; the ratings are what compare. Liberty Safety describes itself as "a value-priced PPE supplier" and its lines sit at the value end of each category with the same published ratings a premium line prints: an X-Grip PRO A4 glove is an A4 glove by the same ANSI/ISEA 105 test as any other manufacturer’s A4, a DuraShell hat is Type I Class G, E, C by the same Z89.1 tests, a DuraSkin 5 mil nitrile is a 5 mil nitrile. Where Liberty differs is breadth (gloves to boots from one catalog), the dozen-and-case price, and the fact that it prints fewer ratings on its commodity gloves (cotton, jersey, leather drivers) than some lines do. The who-makes-work-gloves guide linked below sets the manufacturers side by side.

Where can I buy Liberty Safety products?

From its distributors; Liberty sells to distributors, has no public store and no where-to-buy page, and its quote form asks end users for a "preferred distributor". We stock the line and we sell nationwide by the pair, dozen, box and case; the Liberty Safety brand page linked below lists every item we carry with the live price, and the band below shows one item from each line.

What is the difference between PolyGard, ProGard, PermaGard and PureGard?

The fabric. PolyGard is spunbonded polypropylene, 22 to 46 g, breathable, for dry particles and dirt (coveralls, lab coats, sleeves, shoe covers, bouffants); ProGard is SMS, 50 g, a meltblown layer between two spunbond layers, a better particle barrier with light splash resistance, with an FR-treated version printed "anti-static; meets NFPA 701-2019"; PermaGard is microporous film over polypropylene, 50 to 63 g, the liquid-splash barrier that still passes some vapor; PureGard is a polyethylene film over polypropylene, a solid liquid barrier that does not breathe. All are serged-seam garments; the seam guide linked below explains what serged means for liquids.

What are DayBreaker, X-Grip and the other names when I search for them?

DayBreaker is Liberty’s impact glove line and also a cartoon character and a party brand; X-Grip is Liberty’s cut glove line and also a phone mount; FLX is a glove line and a clothing label and a token; iNOX is Liberty’s eyewear and the French word for stainless steel; DuraShell is a hard hat and a boat finish. On our site every one of those names is written next to the product word (X-Grip cut-resistant gloves, DuraShell hard hat) so the search engine and the buyer land on the glove and not the cartoon.

In plain words

  • Liberty Safety: a California PPE company founded in 1987 as a glove manufacturer, now head-to-toe, selling through distributors from four US warehouses; products made abroad to its specification, country printed on each page.
  • Gloves: X-Grip (cut), FLX (coated), DayBreaker (impact), Arctic-Tuff (winter), ECODEX, Lightning Gear (mechanics), DuraSkin and BioSkin (disposables), plus leather and cotton. Hi-vis: HiVizGard. Rain, boots, aprons, hairnets: DuraWear. Hard hats: DuraShell. Plugs: DuraPlugs. Eyewear: iNOX, BrandX, MACK Fender. Disposable apparel: PolyGard, ProGard, PermaGard, PureGard, APA.
  • The ratings Liberty prints are the standard ones (105, 138, EN 388, 107, Z87.1, Z89.1, NRR); where it prints none, our page prints none.
  • The Prop 65 chromium warning on leather gloves is a California notice about chrome-tanned leather, not a ban or a safety finding.
  • Sizes: XS (6) to 2XL (11) on gloves, the number being the knuckle circumference in inches.
  • PermaGard here is a microporous-film apparel fabric; the car coating of the same name is another company’s product.
  • Liberty sells through distributors and has no public store; we stock the line and we sell nationwide.
Liberty Safety product pages, spec sheets, category pages and About page (libertysafety.com, read Nov 11 2026); the California Proposition 65 warning as printed on Liberty Safety’s leather glove pages

Questions people ask

Who makes Liberty Safety gloves?

Liberty Safety, City of Industry, California, founded 1987 as a glove manufacturer; made abroad to its specification with the country printed on each page.

Where are Liberty Safety gloves made?

Pakistan, Bangladesh, Indonesia, China, Ethiopia and Malaysia by product; ear plugs in Taiwan. The origin is on each product page.

What is PermaGard used for?

Liberty’s microporous-film disposable apparel (coveralls, lab coats, aprons, sleeves, covers) for liquid splash and particles; the car coating of the same name is another company’s product.

Who sells FLX brand clothing?

Liberty’s FLX is a coated work glove line, which we sell; the FLX clothing label is unrelated.

What does the Prop 65 warning on leather gloves mean?

California requires a warning for listed chemicals; chrome-tanned leather contains chromium compounds. It is a notice, not a ban or a safety finding.

Is Prop 65 only in California?

The law is California’s; manufacturers print one label, so the warning ships to every state.

What is the Liberty Safety glove size chart?

XS (6), S (7), M (8), L (9), XL (10), 2XL (11); the number is the knuckle circumference in inches.

Where can I buy Liberty Safety products?

From its distributors; we stock the line and we sell nationwide.

Is Liberty Safety a good brand?

We do not rank brands; its ratings are the standard tests, and it sits at the value end of each category with a head-to-toe catalog.

What is the difference between PolyGard, ProGard, PermaGard and PureGard?

The fabric: polypropylene, SMS, microporous film over polypropylene, and polyethylene film over polypropylene.

What is X-Grip?

Liberty’s cut-resistant glove line, A2 to A6, with PRO and LTE versions.

What is DayBreaker?

Liberty’s impact glove line with TPR back-of-hand protection and ANSI/ISEA 138 levels printed.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Setting up PPE for a crew?Call (925) 215-7337 or email us the trades and headcount and we will quote hard hats, glasses, plugs, gloves and garments by the case, each with the rating its manufacturer publishes. We sell nationwide.
Hard hat selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.