Skip to main content
Home › Guides › Head › Hard hat manufacturers and model names
Guide · Head · Who makes hard hats, the model names, and where they are sold

Bayshore Safety & Industrial Supplies Guide

Which companies make hard hats and safety helmets, and what is a Dax, a V-Gard, a BOLT or an SHK-1? The manufacturers and model names, where hard hats are sold, what MIPS and Koroyd are, and how to read a label

The industrial head protection on this site comes from MSA (V-Gard, TopGard, Skullgard), JSP (EVO, ALTA), PIP (Traverse, Dynamic), Honeywell’s Fibre-Metal and North (Roughneck, E1 and E2, Zone, SE2), Bullard (C30 and C33 Classic), Kask (Zenith), DEWALT (DPG22), Radians (Granite, Titanium), Milwaukee (BOLT), LIFT Safety (DAX), Liberty Safety (DuraShell), Portwest (PS53, PS54, PS73, PW67) and Studson (SHK-1); 3M, Pyramex, Klein, Ergodyne and Petzl also make them. A model name tells you the shell family; the Z89.1 label inside tells you the type and class, and that label, not the brand, is what OSHA’s rule reads. Nothing on this page ranks one manufacturer above another: there is no safest brand, because the rating is per model and the right model is the one the hazard assessment calls for.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · the product names and standards lines of the hard hats and helmets on this site, as each manufacturer prints them (MSA, JSP, PIP, Fibre-Metal, North, Bullard, Kask, DEWALT, Radians, Milwaukee, LIFT Safety, Liberty Safety, Portwest, Studson); the Studson SHK-1 pages (studson.com); ANSI/ISEA Z89.1-2014 (R2019) marking requirements as the manufacturers state them; OSHA Safety and Health Information Bulletin on safety helmets (March 6 2024, advisory); 29 CFR 1910.135(b); Liberty Safety product pages and spec sheets (libertysafety.com, read Nov 11 2026)
Studson SHK-1 Full Brim Vented Type II Hard Hat, Class C, 15 ColorsStudson SHK-1 Full Brim Vented Type II Hard Hat, Class C, 15 ColorsStudson lists the SHK-1 Full Brim Vented as Z89.1-2014 Type I and Type II, Class C, with the model name molded into the shell

Why brand questions get label answers. The questions in this cluster ask for a ranking (top five, number one, safest, the most comfortable padding) that no honest page can give, because hard hats are rated model by model against the same standard and a manufacturer’s cheapest cap hat and its Type II helmet carry different labels. What a page can do is say who the manufacturers are, what their model names mean, what the label tells you that the name does not, where hard hats are sold and what each kind of store carries, and what the technology words on the boxes (MIPS, Koroyd, Twiceme, Fidlock) refer to. That is this page, with every model named below on a row with its rating as the manufacturer prints it.

Manufacturers, models and labels, question by question

Model names and ratings are as each manufacturer prints them on the product pages on this site; we describe other manufacturers’ products only as existing.

Which companies make hard hats and safety helmets?In North America the long-standing industrial manufacturers are MSA (Mine Safety Appliances, which is what the MSA on a hard hat means), Bullard, Honeywell’s Fibre-Metal and North lines, 3M, JSP, PIP, Pyramex, Klein and Ergodyne; the Type II safety-helmet makers that came from climbing and sport include Kask, Petzl and Studson; and the tool brands DEWALT (whose helmets are listed on Radians’ site), Milwaukee and Klein sell helmets to their own trades. Radians, Liberty Safety, Portwest and LIFT Safety round out the list we stock. Each one certifies its own models to ANSI/ISEA Z89.1 and prints the result on the label.
What is a Dax hard hat, a V-Gard, a BOLT, a Zenith, an EVO or an SHK-1?Model names. DAX is LIFT Safety’s full brim line (the HDC-21 on this site is a full brim with a carbon-pattern shell). V-Gard is MSA’s cap and full brim hard hat family, TopGard its polycarbonate hat and Skullgard its phenolic high-heat hat. BOLT is Milwaukee’s hard hat and accessory system (the 48-73-1201 full brim vented on this site is listed Type 1 Class C). Zenith is Kask’s industrial helmet (the X2 is listed Type II). EVO is JSP’s hat family and ALTA its Type II climbing-style helmet (the EVO ALTA Ascend, listed Type II Class E). Granite and Titanium are Radians; Roughneck, E1 and E2 are Fibre-Metal; Zone and SE2 are North; C30 and C33 Classic are Bullard; DuraShell is Liberty Safety; DPG22 is DEWALT. SHK-1 is Studson’s Type II helmet, sold as the standard brim and the full brim. The name tells you the family; the label tells you the rating.
What does MSA mean on a hard hat, and what do the other letters mean?MSA is the manufacturer, Mine Safety Appliances. The letters that matter are the ones molded inside the shell: the Z89.1 designation and edition, the Type (I or II) and Class (G, E or C), the head size range and the manufacture date; optional marks are HV for high visibility, LT for low temperature and the reverse-donning arrow. A model name on the outside says nothing about any of that; two V-Gards can be Class E and Class C, and a Zenith X Air is Type I where a Zenith X2 is Type II. Read the inside.
Which helmet has the most comfortable padding, and what is the padding for?Padding does two different jobs and the question mixes them. The impact liner is the protection: a web suspension on a Type I hat, EPS foam or Koroyd on a Type II helmet, and its job is to crush or stretch once. The comfort pads are what touch the head: a brow pad or sweatband, and on Type II helmets a set of fabric pads over the liner. Studson’s are Ionic+ silver-antimicrobial pads that pull out to wash; other manufacturers use foam or terry pads. A worn comfort pad is replaced with the set made for that model; a crushed impact liner means a new helmet. Nothing on this site ranks the padding of one helmet against another.
What is MIPS, and is it on hard hats?MIPS is a brand of low-friction layer fitted inside some sport and some industrial helmets that lets the shell rotate slightly relative to the head in an angled impact. ANSI/ISEA Z89.1 does not test rotational impact, so MIPS is not part of any Type or Class rating; OSHA’s 2024 bulletin notes that some helmets “incorporate advanced energy re-distribution solutions that reduce rotational forces of certain impacts” without naming any. A manufacturer’s own page states which of its models carry it; the helmets on this page are rated by what their Z89.1 label states. Studson’s approach to angled impacts is the Koroyd liner, which it describes as absorbing both direct and angled blows.
What are Koroyd, Twiceme and Fidlock, and which helmets have them?Studson’s SHK-1 carries all three, and the words appear on the box. Koroyd is the welded-tube impact liner used in place of foam; Twiceme is an NFC chip in the shell that stores the wearer’s emergency contacts and medical information for a first responder’s phone; Fidlock is the magnetic chin-strap buckle. The SHK-1 questions guide linked below explains each. Other manufacturers have their own names for liners, buckles and fit dials, and the technology name never changes the Z89.1 rating.
Where are hard hats sold, and what do Walmart, Lowe’s, Home Depot, Tractor Supply or Target carry?Industrial safety distributors (this site is one) carry the full lines: every type and class, the Type II helmets, the replacement suspensions and the accessories made for each model, with the manufacturer’s rating printed on the page. Home centers and hardware stores carry a few Type I cap hats and usually one or two Type II helmets, mostly from the tool brands (Milwaukee, DEWALT, Klein) and one or two safety brands; farm and ranch stores (Tractor Supply) carry a small Type I selection and forestry helmet systems. General merchandise stores (Walmart, Target) sometimes carry a basic Type I hat and face shields; what any one store stocks changes by location, so we describe only our own stock here. Studson sells through its own site and dealers, and we are a stocking dealer for the SHK-1 line.
Who sells Studson hard hats, and does Studson make a full brim?Studson sells direct and through dealers; we stock the full SHK-1 line (standard brim, full brim, carbon finish, HighBar and the ANSI plus CSA dual-certified full brim) and every accessory Studson makes for it, each on its own page with the part number. Yes, Studson makes a full brim; it is the larger of the two SHK-1 shells and the one most of its accessories are built for.
Are Pyramex, Klein, Milwaukee or Studson hard hats any good?They are rated, not graded. A Pyramex, Klein or Milwaukee hat carries the Z89.1 type and class its manufacturer certifies, as the Studson SHK-1 does, and OSHA’s rule reads that label; a hat from any of them with the class the hazard assessment calls for meets the rule, and one without does not. What distinguishes them is what the manufacturer publishes beyond the rating (weight, liner, accessories, warranty, service life), which this site prints for each model and leaves the reader to weigh. Whether a given helmet suits a given job is the employer’s determination, not ours.
How do you replace a suspension or pads on a LIFT, MSA, JSP or Studson hat?With the suspension or pad set made for that model, and no other: suspensions are not universal, because the key slots and the depth settings are molded for the shell they were tested in. Unkey the old suspension from its slots, key the new one in at the same depth setting, and set the band; on a Type II helmet with pads, the pads pull off their hook-and-loop tabs and the new set presses on. The suspension guide linked below walks through it, and the inspection guide lists replacement suspensions by hard hat model.
Where can I get stickers and reflective kits for a hard hat?From the helmet manufacturer, cut for the model: JSP sells CR2 reflective kits for its cap, full brim and ALTA helmets, PIP for the Traverse, Dynamic for the Dyna-Lite, and Studson its Safe Reflection kit for the SHK-1. The manufacturer’s kit is the one that was tested on the shell; the stickers guide linked below covers what the manufacturers say about other stickers.

Brands and models in plain words

  • Model names (V-Gard, DAX, BOLT, Zenith, EVO, Roughneck, DPG22, SHK-1) name a shell family; the Z89.1 label inside gives the rating.
  • MSA on a hat means Mine Safety Appliances, the manufacturer.
  • There is no safest brand: ratings are per model, and the hazard assessment picks the type and class.
  • MIPS is a rotational layer in some helmets; Z89.1 does not test for it. Koroyd is Studson’s crushable tube liner.
  • Impact liner protects once; comfort pads are replaced with the set made for the model.
  • Distributors carry full lines and parts; home centers carry a few hats; farm stores a few more; Studson sells direct and through dealers like us.
  • Suspensions and pads are model-specific, never universal.
Manufacturer product names and standards lines on this site; Studson pages; OSHA SHIB March 6 2024.

Questions people ask

What are the top 5 helmet brands?

We do not rank them. The industrial manufacturers include MSA, Bullard, Honeywell (Fibre-Metal and North), 3M, JSP, PIP, Pyramex, Kask, Petzl, Studson, Radians, DEWALT, Milwaukee and Klein; each rates its models to Z89.1, and the label decides.

Which is the No. 1 helmet brand?

There is no number one: hard hats are rated per model against one standard, and the right one is the model whose type and class match the hazard assessment.

What is a Dax hard hat?

LIFT Safety’s full brim model line; the one on this site is a full brim with a carbon-pattern shell, rated as its label states.

What does MSA mean on a hard hat?

Mine Safety Appliances, the manufacturer of the V-Gard, TopGard and Skullgard lines.

Which helmet has the most comfortable padding?

Padding is either the impact liner (suspension, foam or Koroyd) or the comfort pads; Studson’s comfort pads are washable Ionic+ sets. We do not rank them.

Does Tractor Supply or Walmart sell hard hats?

Farm and general stores typically carry a basic Type I hat or two; stock varies by location. Safety distributors carry the full type and class range with parts.

Who sells Studson hard hats?

Studson sells direct and through dealers; we are a stocking dealer for the SHK-1 line and its accessories.

Does Studson make a full brim hard hat?

Yes, the SHK-1 Full Brim, vented or non-vented, plus the HighBar and ANSI plus CSA dual-cert versions.

Are Pyramex hard hats good?

They carry the Z89.1 type and class Pyramex certifies, like every rated hat; the label and the hazard assessment decide, not the brand.

Are Klein hard hats Type 2?

Some Klein models are listed Type II and some Type I; the label inside each one says which.

What is MIPS?

A low-friction rotational layer in some helmets. Z89.1 does not test rotation, so it is not part of any type or class.

How to replace a LIFT hard hat suspension?

Only with the suspension made for that model: unkey the old one from the slots, key the new one at the same depth, and set the band. Suspensions are not universal.

What accessories are available for the Milwaukee BOLT hard hat?

Milwaukee’s BOLT system includes its own earmuffs, face shields and lamp mounts; the BOLT earmuff and shields on this site are listed by part number, and only the accessories a manufacturer lists for a helmet keep its rating.

Where can I get high quality stickers for a hard hat?

From the helmet manufacturer, cut for the model (JSP CR2 kits, PIP, Dynamic, Studson’s Safe Reflection kit); the stickers guide covers other stickers.

What does V-Gard mean, and what does MSA stand for?

V-Gard is MSA’s hard hat line, named for the V ridge molded into the cap; MSA states it has sold well over 100 million V-Gard helmets. MSA began as Mine Safety Appliances Company in 1914 and is now MSA Safety, "The Safety Company", as its history page states.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need hard hats or safety helmets for a crew?Call (925) 215-7337 or email us the trades and headcount and we will quote by the case with the Z89.1 type and class each manufacturer publishes.
Hard hat selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.