Skip to main content
Home › Guides › Hand protection › What gloves are made of
Guide · Hand protection · OSHA 3151 · NIOSH 97-135 · 21 CFR 177.2600 · FDA glove labeling

Bayshore Safety & Industrial Supplies Guide

What are rubber gloves made of? Natural rubber latex, nitrile, neoprene, PVC, polyurethane, butyl and laminate film, whether nitrile is rubber or plastic, and what happens to a nitrile glove after use

A “rubber glove” is made of one of about eight polymers, and OSHA’s PPE booklet names them: the rubbers (natural latex, butyl, neoprene, nitrile and fluorocarbon) and the plastics (polyvinyl chloride, polyvinyl alcohol and polyethylene), blended or laminated for performance. Natural rubber latex is the sap of the rubber tree, and it is the only glove material that carries the plant proteins NIOSH identifies as the cause of latex allergy. Nitrile is a synthetic rubber, acrylonitrile-butadiene (NBR), so a nitrile glove is rubber and not plastic, and it contains no natural rubber latex; what nitrile shares with latex is the accelerators (thiurams, carbamates) used to cure both, which NIOSH names as the cause of the delayed skin reaction some people get from any rubber glove. Neoprene and butyl are synthetic rubbers too; PVC (vinyl) is a plastic softened with plasticizers; polyurethane is the thin coating on many knit work gloves; polyethylene is the film of a poly glove and, with EVOH, the laminate of the widest-range chemical gloves. “Which chemical is used in hand gloves” therefore has a list for an answer, not one chemical: the polymer, the curing agents, pigments, and in a powdered glove cornstarch. The FDA requires a medical glove’s package to identify the materials used to make it, which is how a latex-free glove is identified, and 21 CFR 177.2600 is the rule a food-contact rubber glove is formulated to. After use, an ordinary nitrile glove is a cross-linked rubber that household recycling does not take; two MCR Safety nitrile products on this site are described by MCR Safety as biodegradable (the 5380 NitriShield glove with MAX-Bio Technology and the biodegradable foam coating on UltraTech 96092), and no manufacturer here publishes a microplastics figure. Where the glove touched blood or a hazardous chemical, the disposal rule is the one for that material.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · OSHA Publication 3151-12R 2004, Personal Protective Equipment, hand and arm protection (the four glove groups; the rubbers and plastics used for chemical gloves); NIOSH Alert, Preventing Allergic Reactions to Natural Rubber Latex in the Workplace, DHHS (NIOSH) 97-135 (latex proteins; accelerators), as the latex allergy guide on this site quotes it; FDA, Medical Gloves (July 2024: package labeling must identify the materials; PVC, nitrile and polyurethane as latex-free materials); 21 CFR 177.2600 (rubber articles intended for repeated use); 29 CFR 1910.137 and 1910.1030; the MCR Safety 5380 NitriShield and UltraTech 96092 pages (biodegradable nitrile with MAX-Bio Technology; biodegradable nitrile foam coating; mcrsafety.com, Nov 6 2026); the G-Tek ECO Series and Portwest Eco pages (recycled PET and bio-based yarns); the material, thickness and Standards lines on the PIP, MCR Safety, Portwest and Radians glove pages on this site; Liberty Safety product pages and spec sheets (libertysafety.com, read Nov 11 2026)
Assurance 50-N110G Chemical Resistant Gloves, Nitrile Coated, UnlinedAssurance 50-N110G Chemical Resistant Gloves, Nitrile Coated, UnlinedNitrile is a synthetic rubber, acrylonitrile-butadiene; PIP’s 11 mil nitrile chemical glove, with the permeation table that follows from the material (PIP data)

Why the material is the first line on a glove page. Everything else about a chemical or disposable glove follows from the polymer: what it resists, how it fits, whether it can cause an allergy, how it is sold and how it is thrown away. OSHA’s booklet sorts protective gloves into four groups (leather, canvas or metal mesh; fabric and coated fabric; chemical- and liquid-resistant; insulating rubber), and the chemical group is where the polymer list lives, with the booklet’s own one-line descriptions: butyl protects against peroxide, strong acids and bases, alcohols, aldehydes, ketones, esters and nitro compounds and does not perform well with aliphatic and aromatic hydrocarbons and halogenated solvents; natural latex has outstanding tensile strength, elasticity and temperature resistance, protects against most water solutions of acids, alkalis, salts and ketones, and has caused allergic reactions in some individuals; neoprene protects against hydraulic fluids, gasoline, alcohols, organic acids and alkalis and generally has chemical and wear resistance superior to natural rubber; nitrile is a copolymer that protects against chlorinated solvents such as trichloroethylene and perchloroethylene and stands up to oils, greases, acids, caustics and alcohols but is generally not used with strong oxidizing agents, aromatic solvents, ketones and acetates. The booklet adds the rule of thumb that the thicker the material the greater the chemical resistance, at a cost in grip and dexterity. The second half of the material question is the skin. NIOSH’s latex alert distinguishes the immediate (type I) allergy to natural rubber latex proteins from allergic contact dermatitis (type IV), a delayed reaction to the chemicals added during manufacturing, chiefly the accelerators, and from irritant dermatitis caused by sweat, friction and glove powder. Only the first is specific to latex; the second can happen with nitrile, neoprene or vinyl; the third with any glove. That is why FDA requires the materials to be named on a medical glove’s label, why “latex-free” is a material statement and not a hypoallergenic one, and why the manufacturers on this site print “no natural rubber latex” rather than “hypoallergenic” on their nitrile gloves.

The materials, one by one

From OSHA’s booklet, NIOSH’s alert and the manufacturers’ product data.

Natural rubber latexThe sap of the rubber tree, coagulated and cured. OSHA: outstanding tensile strength, elasticity and temperature resistance; resists most water solutions of acids, alkalis, salts and ketones; poor with oils and solvents; allergic reactions in some individuals. The only glove material with the latex proteins NIOSH names as the cause of latex allergy. Examination gloves to ASTM D3578; chemical gloves 14 to 44 mil on this site (PIP Assurance 47-L and 48-L series, MCR Safety canners’ gloves).
Nitrile (NBR)Acrylonitrile-butadiene rubber, a synthetic rubber made by copolymerizing acrylonitrile and butadiene. OSHA: protection from chlorinated solvents, oils, greases, acids, caustics and alcohols; not for strong oxidizers, aromatic solvents, ketones and acetates. No natural rubber latex. Examination gloves to ASTM D6319 (3 to 8 mil); chemical gloves 11 to 22 mil; the palm coating on most coated work gloves. Is nitrile rubber or plastic? Rubber: an elastomer, cured with accelerators like latex, which is why it stretches and why NIOSH’s type IV reaction can occur with it.
Neoprene (polychloroprene)A synthetic rubber. OSHA: hydraulic fluids, gasoline, alcohols, organic acids and alkalis; chemical and wear resistance generally superior to natural rubber. MCR Safety’s NeoMax and BlackJack and PIP’s Chemguard+ and ChemGrip are neoprene; the neoprene guide lists their EN ISO 374-1 letters. What is the difference between neoprene and polyisoprene? Both are synthetic rubbers; polyisoprene copies the natural rubber molecule without the proteins and is used for surgical gloves, neoprene is a different polymer used for chemical gloves and wetsuits.
Butyl rubberA synthetic rubber. OSHA: peroxide, rocket fuels, highly corrosive acids, strong bases, alcohols, aldehydes, ketones, esters and nitro compounds; resists oxidation and ozone and stays flexible when cold; does not perform well with aliphatic and aromatic hydrocarbons and halogenated solvents. The PIP Assurance BUT03 and BUT05 gloves, 12 and 20 mil, with 480-minute acetone figures.
PVC (vinyl)Polyvinyl chloride, a plastic made flexible with plasticizers. OSHA lists it among the chemical-glove plastics. Disposable vinyl examination gloves (ASTM D5250) and food-service gloves; supported PVC chemical gloves on a knit liner (PIP ProCoat, XtraTuff; MCR Safety Memphis PVC); PVC-coated knit work gloves and cold-weather gloves. Are PVC gloves the same as nitrile? No: a plastic and a synthetic rubber, with different chemical lists and a different feel.
Polyurethane (PU)A polymer applied as a thin palm coating on knit work gloves for grip and feel; also the material of some latex-free examination gloves, which FDA names with PVC and nitrile. Are polyurethane gloves safe? The coating carries no latex protein; the glove coating guide compares PU with nitrile and latex coatings.
Polyethylene and EVOH laminatePolyethylene is the film of a poly food glove and, as a multilayer laminate with ethylene vinyl alcohol, the material of the North Silver Shield chemical gloves, which list the chlorinated and aromatic solvents the rubbers do not hold. OSHA: materials can be blended or laminated for better performance. Thin (2.7 mil), with no stretch, so it is often worn under another glove.
Fluorocarbon (Viton) and polyvinyl alcoholThe other two polymers on OSHA’s list: fluoroelastomer gloves for aromatic and chlorinated solvents, and PVA gloves for solvents that attack rubbers but that must be kept dry because water dissolves PVA. Neither is listed on this site.

The other things in a glove, and the after-use questions

The ingredients that are not the polymer, and the recycling, biodegradation and disposal questions, answered from what the sources state.

  • Accelerators: the chemicals (thiurams, carbamates, mercaptobenzothiazole) that cure a rubber glove, natural or synthetic. NIOSH names them as the cause of allergic contact dermatitis, the delayed rash, which is why “accelerator-free” nitrile exists. The latex allergy guide covers the three reactions.
  • Pigments: blue, black, orange, green and purple are colorants, not materials. The food and mechanics guides explain why kitchens use blue and shops use black.
  • Powder: cornstarch, used to ease donning; banned on medical gloves by FDA since 2017 and replaced by chlorination or a polymer inner coating. Still sold on some industrial vinyl.
  • Plasticizers: the esters that make PVC flexible; they can migrate into oils and are the reason food-contact vinyl is formulated to 21 CFR Part 177.
  • Is nitrile considered latex? No. “Latex” on a glove label means natural rubber latex; FDA requires the materials to be identified on the package, and a nitrile glove is labeled as containing no natural rubber latex. What is the difference between latex and latex-free? The presence of natural rubber latex proteins.
  • Can nitrile gloves be recycled? Ordinary nitrile is a cross-linked rubber that curbside programs do not take. No manufacturer on this site states a recycling route for used disposable gloves; the recycled content some gloves carry (G-Tek ECO Series shells of recycled plastic yarn, Portwest Eco gloves of recycled PET, MCR Safety UltraTech 96091 and 96092 recycled polyester shells) is in the knit liner, not the nitrile.
  • Do nitrile gloves biodegrade? Standard nitrile is not described as biodegradable by any manufacturer here. MCR Safety describes two products as biodegradable: the 5380 NitriShield 8 mil nitrile glove “made with MAX-Bio Technology” and the “biodegradable nitrile foam coating” on the UltraTech 96092; it publishes no rate or test method on the product pages on this site.
  • Do nitrile gloves give off microplastics? No manufacturer on this site publishes a figure, and the standards the gloves are tested to (ASTM D6319, EN ISO 374) do not measure it; the question has no data answer here.
  • How do you dispose of nitrile gloves? As the contamination requires: gloves with blood or other potentially infectious materials are regulated waste under 29 CFR 1910.1030; gloves soaked with a hazardous chemical follow the waste rules for that chemical; clean gloves are ordinary refuse.
NIOSH Alert 97-135 as quoted in the latex allergy guide; FDA Medical Gloves page; 21 CFR 177.2600; 29 CFR 1910.1030(d)(4)(iii); the MCR Safety 5380 and 96092 and the G-Tek ECO Series and Portwest Eco product pages on this site.
The glove polymers side by side, from OSHA’s descriptions and the product data
MaterialRubber or plasticNatural rubber latex proteinWhat OSHA says it resistsWhat OSHA says it does notOn this site
Natural rubber latexRubber (natural)YesWater solutions of acids, alkalis, salts, ketones; abrasionOils, solvents; allergic reactions in some peoplePIP Assurance 47-L, 48-L; Ambi-dex 2550; Radians RWG91; MCR Safety canners’ gloves
Nitrile (NBR)Rubber (synthetic)NoChlorinated solvents, oils, greases, acids, caustics, alcoholsStrong oxidizers, aromatic solvents, ketones, acetatesPIP Assurance 50-N, Ambi-dex; MCR Safety Nitri-Chem, NitriShield; Radians RWG94; Portwest A810, A930
NeopreneRubber (synthetic)NoHydraulic fluids, gasoline, alcohols, organic acids, alkalisNot stated in the booklet; the EN letters on the pages give the gapsPIP Chemguard+, ChemGrip, Assurance 52-; MCR Safety NeoMax, BlackJack
ButylRubber (synthetic)NoPeroxide, strong acids and bases, alcohols, aldehydes, ketones, esters, nitro compoundsAliphatic and aromatic hydrocarbons, halogenated solventsPIP Assurance BUT03, BUT05
PVC (vinyl)PlasticNoListed among the chemical-glove plastics; water-based chemicals per the manufacturersOils and solvents that pull out plasticizerPIP Ambi-dex 64-V, ProCoat, XtraTuff; MCR Safety SensaTouch, Memphis PVC
PolyurethanePolymer coatingNoGrip coating; latex-free exam glove material per FDANo chemical claim on the coated knitsPIP, MCR Safety, Portwest, Radians PU-coated knits
Polyethylene / EVOH laminatePlastic filmNoLaminated for performance; the Silver Shield listThin, no stretchNorth Silver Shield SSG, SSB, SSS
Fluorocarbon (Viton), PVARubber / plasticNoAromatic and chlorinated solvents (Viton); solvents (PVA, dry only)PVA dissolves in waterNot listed

OSHA’s descriptions rate the polymer family; the breakthrough time for a specific chemical is on the glove’s own table.

Source: OSHA Publication 3151-12R 2004, hand and arm protection; the material and Standards lines on the product pages on this site.

Questions people ask

What are rubber gloves made of?

One of the polymers OSHA’s booklet lists: natural rubber latex, nitrile, neoprene, butyl or fluorocarbon (the rubbers), or PVC, polyvinyl alcohol or polyethylene (the plastics), blended or laminated. The material line on the product page says which.

Which chemical is used in hand gloves?

Not one chemical: the polymer (natural rubber, acrylonitrile-butadiene, polychloroprene, butyl, PVC, polyurethane or polyethylene), the accelerators that cure a rubber glove, pigments, plasticizers in PVC, and cornstarch in a powdered glove.

What are the ingredients in nitrile gloves?

Acrylonitrile-butadiene synthetic rubber, cured with accelerators (thiurams, carbamates and related chemicals, per NIOSH), with pigments and a chlorinated or polymer-coated inner surface in place of powder. No natural rubber latex.

Is nitrile a rubber or plastic, and are nitrile gloves plastic?

Rubber. Nitrile is a synthetic elastomer, which is why it stretches and recovers; vinyl (PVC) is the plastic disposable glove. OSHA’s booklet calls nitrile a copolymer and lists it with the rubbers.

Is nitrile considered latex?

No. Latex on a label means natural rubber latex; nitrile contains none, and FDA requires the materials to be identified on a medical glove’s package. A delayed rash from a nitrile glove is a reaction to accelerators, not to latex.

What is the difference between latex and latex-free gloves?

Natural rubber latex proteins, which cause the immediate (type I) allergy NIOSH describes. Latex-free gloves (nitrile, vinyl, neoprene, polyurethane) have none; they can still cause the delayed contact dermatitis from accelerators.

Are PVC gloves the same as nitrile gloves?

No. PVC is a plasticized plastic; nitrile is a synthetic rubber. They resist different chemicals, fit differently, and PVC disposables have lower puncture and tear resistance.

What is the difference between neoprene and polyisoprene?

Both are synthetic rubbers without latex protein. Polyisoprene is the synthetic copy of natural rubber used for surgical gloves; neoprene (polychloroprene) is a different polymer used for chemical gloves, and OSHA lists what it resists.

What is special about nitrile gloves?

In OSHA’s words: protection from chlorinated solvents, oils, greases, acids, caustics and alcohols, and a glove that stands up to heavy use; in the manufacturers’ data, the highest puncture resistance of the disposable materials and no latex protein.

Are polyurethane gloves safe?

Polyurethane carries no natural rubber latex; FDA names it with PVC and nitrile as a latex-free material. On work gloves it is a thin palm coating with no chemical claim.

Can nitrile gloves be recycled?

Not through ordinary recycling; nitrile is a cross-linked rubber. No manufacturer on this site states a route for used gloves. Recycled content, where a glove has it, is in the knit liner (G-Tek ECO Series, Portwest Eco, MCR Safety UltraTech).

Do nitrile gloves biodegrade?

Standard nitrile is not described as biodegradable by any manufacturer here. MCR Safety describes the 5380 NitriShield (MAX-Bio Technology) and the UltraTech 96092 foam coating as biodegradable and publishes no rate on the product pages.

Do nitrile gloves give off microplastics?

No manufacturer on this site publishes a figure and the glove standards do not measure it; the honest answer is that there is no data on these pages.

How do you dispose of nitrile gloves?

By what is on them: regulated waste under 1910.1030 for blood and other potentially infectious materials, the hazardous-waste rule for a chemical they are soaked with, and ordinary refuse when clean.

Which disposable gloves are non-toxic?

All three materials are formulated for skin contact, and food-contact versions are formulated to 21 CFR Part 177; the reactions people have are the latex allergy (latex only) and the accelerator and irritant dermatitis NIOSH describes. There is no “toxic” glove material among them.

What are dip gloves?

Gloves made by dipping a hand-shaped former into liquid polymer: every disposable and most chemical gloves are dipped, and a coated knit is a knit liner dipped at the palm (palm dip), three-quarters or fully. The glove coating guide covers the dips.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need gloves matched to a crew’s work?Call (925) 215-7337 or email us the task, the hazard and the sizes and we will quote by the dozen with the manufacturer’s ratings listed.
Work glove selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.