Bayshore Safety & Industrial Supplies Guide
What size hi-vis vest should you get? How a safety vest fits over a shirt or a jacket, the ML Kishigo chest and length chart by size, sizing up or down, S to 5XL, women’s cuts, how to measure, and fit with a tool belt, harness or hard hat
Get the size whose chest range on the manufacturer’s chart covers your chest measurement taken over whatever you will wear under the vest, and when you sit between two sizes, the larger one. ML Kishigo prints a chest-and-length chart on every spec sheet: on the 1055 Class 2 mesh vest a medium fits a 38 to 40 inch chest at 26 inches long, a large 40 to 44 at 27, an extra-large 44 to 46 at 27, and the run goes to 5X at 58 to 62 inches; the surveyor vest S5004 runs wider at each letter (medium 40 to 42, large 44 to 46) because it is cut to carry gear. Two things matter more than on a shirt. First, a vest is worn over clothes, so a winter crew measures over the sweatshirt or the jacket, which is why the economy vests come in two-size steps (S/M, L/XL, 2X/3X, 4X/5X) and the public safety vests have "4-season adjustability" for wear "even over bulky coats". Second, the class is tested by size: ML Kishigo’s FAQ explains that the standard "allows a reduced area of visible background material for the smallest size garment offered in Type R, Performance Class 2 or 3" (540 square inches against 775), so a vest that fits carries its class and a vest hanging to the knees or straining at the chest is one the standard did not test on that body. The charts and the questions below take it garment by garment.
ML Kishigo 1055 Safety Vest, Class 2 Type R, Orange, 2 Pockets, Zipper FrontML Kishigo labels it ANSI/ISEA 107 Type R Class 2; sizes S to 5X, chest 36 to 62 inches on the spec sheetHow a hi-vis vest should fit. Closed, with the front closure meeting without strain and the retroreflective bands lying flat around the torso; a vest worn open hides the front band and the standard’s "balance of design" (at least 40 percent of the minimum material on the front and on the back) assumes it is closed. The shoulders should sit on the shoulders so the vertical bands run over them, the bottom hem should clear a tool belt rather than bunch over it, and the armholes should let the arms swing without the vest riding up. On a mesh vest that is loose enough to pull over a sweatshirt; on a solid-front surveyor vest it is the size whose pockets you can reach with the vest zipped. ML Kishigo prints the chest range and the garment length for every size on the spec sheet, which is the chart to use; letter sizes differ between its cuts, and a large in the 1055 (40 to 44) is not a large in the S5004 (44 to 46).
Class 2 mesh vest, 1055 and 1056: ML Kishigo spec-sheet size chart (chest in inches, garment length in inches)
| Size | Chest | Length |
|---|---|---|
| S | 36 to 38 | 25 |
| M | 38 to 40 | 26 |
| L | 40 to 44 | 27 |
| XL | 44 to 46 | 27 |
| 2X | 46 to 50 | 28 |
| 3X | 50 to 54 | 29 |
| 4X | 54 to 58 | 29 |
| 5X | 58 to 62 | 30 |
Source: ML Kishigo spec sheet for the 1055, sizes S-5X, read Nov 12 2026
Surveyor vest, S5004: ML Kishigo spec-sheet size chart (chest in inches, garment length in inches)
| Size | Chest | Length |
|---|---|---|
| S | 36 to 38 | 27 |
| M | 40 to 42 | 28.25 |
| L | 44 to 46 | 28.25 |
| XL | 48 to 50 | 28.25 |
| 2X | 52 to 54 | 29.25 |
| 3X | 56 to 58 | 30.25 |
| 4X | 60 to 62 | 30.25 |
| 5X | 64 to 66 | 31.25 |
Source: ML Kishigo spec sheet for the S5004, sizes S-5X, read Nov 12 2026
Class 2 T-shirt, 9110 and 9111: ML Kishigo spec-sheet size chart (chest in inches, garment length in inches)
| Size | Chest | Length |
|---|---|---|
| S | 32 to 34 | 27 |
| M | 34 to 36 | 28 |
| L | 38 to 40 | 29 |
| XL | 42 to 44 | 30 |
| 2X | 46 to 48 | 31 |
| 3X | 50 to 52 | 32 |
| 4X | 54 to 56 | 33 |
| 5X | 58 to 60 | 34 |
Source: ML Kishigo spec sheet for the 9110, sizes S-5X, read Nov 12 2026
Women’s Class 2 vest, 1586: ML Kishigo spec-sheet size chart (chest in inches, garment length in inches)
| Size | Chest | Length |
|---|---|---|
| S | 41 to 43 | 26.25 |
| M | 43 to 45 | 26.25 |
| L | 45 to 47 | 27.25 |
| XL | 48 to 50 | 27.25 |
| 2X | 52 to 54 | 27.25 |
Source: ML Kishigo spec sheet for the 1586, sizes S-2X, read Nov 12 2026
Sizing, cut by cut
What each ML Kishigo cut is sized for, from the spec sheets.
The questions, one by one
Answers from the ML Kishigo spec sheets and FAQ.
What size hi-vis vest should I get?
Measure your chest at its fullest point over the clothes you will wear under the vest, find that number in the chest column of the spec sheet for the style you are buying, and take that size; between two sizes, the larger. On the 1055 that puts a 42 inch chest in a large (40 to 44); on the S5004 surveyor vest the same chest is a medium (40 to 42), because the surveyor cut is wider at every letter. The charts above are the manufacturer’s.
Should you size up or down for a safety vest?
Up, when the vest will go over a sweatshirt, a jacket or a harness, and when you are between sizes; the closure overlap takes up slack, and a vest that will not close is useless. Down only on a solid-front surveyor vest you will wear over a T-shirt and load with gear, where a closer fit keeps the pockets in reach. Never so far down that the front bands pull apart.
Do safety vests come in different sizes?
Yes, two ways: single sizes from S or M to 5XL on most ML Kishigo vests, shirts and jackets, and two-size steps (S/M, L/XL, 2X/3X, 4X/5X) on the economy and breakaway vests, where the hook-and-loop closure covers the range. The spec sheet prints the run and the chest for each.
How do I measure for a vest?
A tape around the fullest part of the chest, under the arms, over what you will wear under the vest, held level and snug but not tight; that is the chest number. Length is from the top of the shoulder at the neck to where you want the hem, which the chart gives as garment length. A tool belt wearer wants the hem above the belt.
How should a hi-vis vest fit over a jacket?
Closed, with the bands flat. Measure over the jacket, which usually moves a wearer up one size; the two-size vests and the public safety vests with "4-season adjustability" are made for the swing between a T-shirt in July and a parka in January. Or wear a Class 3 jacket, which is hi-vis itself and needs no vest over it.
Does a vest fit over a safety harness?
The vest goes over the harness so the D-ring and the webbing can be seen and reached, which means sizing over the harness as over a jacket, and the breakaway vests (5-point on the 1805 and 1552B) are the choice where a snag is a hazard. Some crews wear a harness over a Class 3 shirt instead.
Does the size change the class?
The standard tests the garment at each size. ML Kishigo’s FAQ explains that the smallest size of a Type R Class 2 or 3 garment may carry a reduced area of background material (540 square inches against 775 for every other size), "recognizing that wearing oversized garments may compromise safety". A vest that fits carries the class on its label; the standard did not test a vest two sizes too big on a small frame.
Is a women’s vest just a smaller men’s vest?
No: the women’s cut is shorter in the body and shaped, and the 1586 chart runs 41 to 54 inches at S to 2X, which is not a scaled-down men’s run. A woman who finds a men’s small too long and loose in the shoulders is the buyer; one who fits a men’s medium well can wear either.
What size is a "small" vest, and is 40 an XL?
On the ML Kishigo 1055 a small fits a 36 to 38 inch chest; a 40 inch chest is a medium to large on that chart and a medium on the surveyor vest, nowhere near XL (44 to 46). Letter sizes mean nothing without the chart, which is why the spec sheet prints inches.
Should a vest be tucked in?
No. A vest hangs over the shirt and the belt line so the bottom band around the torso stays visible; tucking it hides the band and pulls the front open.
In plain words
- Measure the chest over what you will wear under the vest, read the spec-sheet chart for that style, and take the size that covers it; between sizes, go up.
- Letter sizes differ by cut: a large is 40 to 44 inches on the 1055 mesh vest and 44 to 46 on the S5004 surveyor vest.
- Economy and breakaway vests come in two-size steps; surveyor, heavy-duty and Premium vests, shirts and jackets in single sizes to 5XL; women’s cuts are shaped and shorter.
- A vest that fits carries its class; the standard tests each size, and the smallest size has its own figure.
Questions people ask
What size safety vest should I get if I am between sizes?
The larger one; the closure overlap takes up the slack and the bands stay flat, while a vest that will not close hides the front band.
What chest does a large safety vest fit?
It depends on the cut: 40 to 44 inches on the ML Kishigo 1055 mesh vest, 44 to 46 on the S5004 surveyor vest, per the spec sheets.
Do safety vests come in 5XL?
Yes; most ML Kishigo vests, shirts and jackets run to 5XL, with a 58 to 66 inch chest at 5X depending on the cut.
What is an S/M vest?
A two-size step on the economy and breakaway vests, covering small and medium with a hook-and-loop or zipper closure; L/XL, 2X/3X and 4X/5X follow.
Are there women’s safety vests?
Yes; ML Kishigo makes women’s-cut Class 2 and Class 3 vests, surveyor vests and a soft shell jacket, shorter in the body and shaped.
Should I measure over my jacket?
Yes, if the vest will be worn over it; measure over the heaviest layer the vest will cover.
How long is a safety vest?
ML Kishigo prints the garment length by size: 25 to 30 inches on the 1055 mesh vest, 27 to 31.25 on the S5004 surveyor vest.
Does a vest that is too big still count as Class 2?
The label is tested by size; the standard allows a smaller material area only for the smallest size, and a vest two sizes too big was not tested on that body. Buy the size that fits.
Related guides
What are the levels of safety vests?Class 1, 2, 3 and E, Type R, O and PWhat is a surveyor’s safety vest?Surveyor, breakaway, X-back and black bottom vestsWhere can you buy a safety vest, and how much does one cost?Prices by garment, and what moves themANSI 107 Class 1, 2 and 3What the classes mean, and which one your job needsHi-vis rain gear and cold-weather gearKeeping the class ratingWhat is the average glove size for a woman?Hand measurements and the size chartsCoverall size chartHow to size disposable and work coverallsThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
