Skip to main content
Home › Guides › Hi-vis › Surveyor vests
Guide · Hi-vis · Vest cuts

Bayshore Safety & Industrial Supplies Guide

What is a surveyor’s safety vest? Surveyor vests vs standard Class 2 vests, breakaway and tear-away vests, X-back vests, black bottom vests, mesh vs solid, zipper vs hook-and-loop, pockets, mic tabs, ID pockets and tool tethering

A surveyor’s safety vest is a Class 2 hi-vis vest cut to carry a surveyor’s gear: a solid polyester front with a mesh back, a zipper, and seven to twelve pockets laid out for the work, with a clear ID holder, pencil divisions, a radio pocket, stake pockets, spray-paint can pockets, a tablet pocket and a hidden back pouch for plans. ML Kishigo’s S5002, the top of its surveyor line, prints "solid polyester front with heavy duty bottom to keep clean appearance, and mesh back", "outside lower front pockets with flaps, left and right stake pockets, left and right elastic spray paint can pockets", "lower inside left and right full width zipper pockets with load bearing straps" and a "hidden back pouch with left and right zipper access"; the S5004 adds a tablet pocket "with load-bearing strap" and a "padded neck for comfort". The class is the same as a plain vest, ANSI/ISEA 107 Type R Class 2, and the cut is what you pay for: $24.49 to $78.87 against $6.49 for a one-pocket mesh vest. Surveyors wear it because the vest is the tool belt; so do inspectors, foremen, engineers and anyone who works from a tablet and a radio. The guide below sets the surveyor cut beside the other cuts people ask about, the breakaway, the X-back, the black bottom and the tool-tethering vest, and says what each one is for.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026); ML Kishigo High-Visibility FAQ, Flame Resistant FAQ, Garment Inspection and About Us pages (kishigo.com, read Nov 12 2026); MUTCD 11th Edition (FHWA, December 2023), Part 6, sections 6C.05, 6D.02 and 6D.03 (saved Nov 12 2026)
ML Kishigo S5004 Surveyor Vest, Class 2 Type R, Lime, 7 Pockets, Zipper FrontML Kishigo S5004 Surveyor Vest, Class 2 Type R, Lime, 7 Pockets, Zipper FrontML Kishigo labels it ANSI/ISEA 107 Type R Class 2; surveyor vest, 7 pockets, tablet pocket, padded neck, zipper front

Mesh or solid, zipper or hook-and-loop. Every cut below carries the same label when the class is the same; the differences are comfort, durability and what the vest has to do. Mesh ("Ultra-Cool 100% polyester mesh" on most Kishigo vests) breathes and is the summer and general-crew choice; solid polyester holds its shape, takes a printed logo and keeps a pen from poking through, which is why surveyor vests are solid in front and mesh behind. A hook-and-loop front (a "4 in. hook and loop front closure" on the economy vests) is cheap, fast and forgiving of size; a "zipper front closure with durable webbing reinforcement" stays closed when the vest is loaded and lasts the rated 50 washes. Pockets are the rest of the price: one left chest pocket on a $7.99 vest, six on the heavy-duty 1513, twelve on the S5002 surveyor vest.

The cuts, in ML Kishigo’s words

Each feature is quoted from the product page; the class is what the label says.

Surveyor vestSolid front, mesh back, zipper, seven to twelve pockets: clear ID holder, 2-tier pencil pocket, radio pocket, stake and spray-paint can pockets, tablet pocket, full-length inside pockets with load-bearing straps, hidden back pouch. S5002 (12 pockets), S5004 (7), S5008Z, S5021 and S5022 (women’s), the color-contrast S5042 to S5046, the fluorescent red S5704.
Breakaway (tear-away) vest"5-point breakaway sides, shoulders and front closure" on the 1805 and 1552B, "4-point breakaway" on the public safety vests: the vest pulls apart if it snags on a vehicle, a conveyor or a machine. Class 2 (1805, 1174, 1176, 1166BA) or Class 3 (1552B). For towing, rail, flagging beside traffic and anywhere a snag could drag a worker.
X-back vestThe two back bands cross in an X instead of running parallel: "X back configuration" on the 1576 and 1577 (Class 2, also labeled CSA Z96) and on the 1805 and 1806 breakaway vests. The X reads as a person from behind at night and sits better over a harness.
Black bottom vestFluorescent on top, black "to keep a clean appearance" below: the Premium Black Series 1513, 1515, 1516, 1509, 1529 and the 9162 shirt. Still Class 2 or 3, because the standard counts the fluorescent and retroreflective area, not the color of the rest.
Tool tethering vestThe 1820 prints "7 anchor points certified to tether 25 lbs each with a maximum tether length of 54 in. in accordance with Meets ANSI/ISEA 121-2018"; the 1580 and 1581 print "reinforced D-ring access on back" for a harness. For work at height and over people.
Economy vestMesh, one pocket, hook-and-loop, two-size steps: the 1193, 1571 and 1572. The vest a crew buys by the case for visitors and day labor.
Heavy-duty vestMesh with reinforced zipper, six pockets including a "heavy duty gusseted radio/utility pocket" and two "cargo pockets with adjustable flaps and grommets": the 1513 and 1514. The everyday vest for a foreman.
Public safety vestType P, solid front, mesh shoulders and back, two 1 in. bands, 4- or 5-point breakaway, badge and name-tag holders: the 4001BZ, 4003BV, 4007BZ and the 8055BZ with its "Police Legend". The public-safety guide linked below covers them.

The questions, one by one

Answers from the ML Kishigo product pages named in the byline.

What is a surveyor’s safety vest?

A Class 2 vest with a solid front, a mesh back, a zipper and the pockets a surveyor needs: ID, pencils, radio, stakes, paint cans, tablet, plans. The S5002 has twelve pockets, the S5004 seven; both are ANSI/ISEA 107 Type R Class 2 like a plain vest, and both are rated 50 washes. It is the vest for anyone who works out of a vest rather than a belt.

What do land surveyors wear?

The surveyor vest over a shirt, with the instrument case on a strap; the solid front keeps the stakes, the flagging tape and the paint cans in reach and the mesh back keeps them cool. In a work zone the vest has to be Class 2 by day, and on a highway at night the MUTCD says a flagger should be in Class 3, which for a surveyor usually means a Class 3 shirt under the vest or a Class 3 jacket over it.

What is a breakaway or tear-away vest, and who needs one?

A vest whose shoulders, sides and front are held by hook-and-loop so it pulls apart if it catches: "5-point breakaway sides, shoulders and front closure" on the ML Kishigo 1805 and 1552B. Towing, rail, warehouses with conveyors, flagging beside moving traffic and any work where a vest snagged on a vehicle could drag the wearer. The breakaway points are also the sizing, which is why the 1805 comes in two-size steps.

What is an X-back vest?

A vest whose two vertical back bands cross in an X rather than running parallel over the shoulders. Kishigo prints "X back configuration" on the 1576 and 1577; the pattern outlines the shoulders and the spine at night and sits flatter under a harness or a backpack strap. The class is unchanged.

What is a black bottom vest, and is it still Class 2?

A vest with the fluorescent material and the tape on the upper body and a black lower band "to keep a clean appearance" where the vest meets the belt and the dirt. ML Kishigo labels its Premium Black Series Type R Class 2 (1513, 1515, 1516, 1509, 1529) and makes Class 3 versions of the shirts and jackets; the standard counts the fluorescent and retroreflective area and does not care what color the rest is.

Mesh or solid?

Mesh for heat and for a vest worn all day in summer; solid for a printed logo, for pockets that carry pens and tools, and for a vest that has to look clean. Most ML Kishigo surveyor vests are solid in front and mesh in back for that reason; most economy and heavy-duty vests are all mesh.

Zipper or hook-and-loop?

Hook-and-loop is cheaper, forgiving of size and what the breakaway vests use for their tear-away points; a zipper stays closed under load, does not wear out in the wash and is what the surveyor and heavy-duty vests use ("reinforced zipper front closure with durable webbing"). A public safety vest uses hook-and-loop at the breakaway points and a zipper in front.

What is a heavy utility vest, and what is a utility vest for?

In hi-vis, the heavy-duty and surveyor vests: a Class 2 vest with reinforced closures and six to twelve pockets so the vest carries the radio, the tablet, the pens and the tape measure. The ML Kishigo 1513 ("heavy duty gusseted radio/utility pocket", cargo pockets with grommets) is the heavy-duty vest; the S5002 is the utility vest for a surveyor.

Do safety vests have pockets, and what is a mic tab?

From one to twelve. A mic tab is a loop on the chest ("left chest mic tab" on most Kishigo vests, "left and right mic tabs" on the surveyor vests) that holds a radio microphone clip; lapel grommets hold a badge reel; a clear ID holder shows a credential; a 2-tier, 4-division pencil pocket keeps pens and markers sorted. The product page lists each one.

What is a tool tethering vest?

A vest with rated anchor points for tool lanyards so a dropped tool stops short of the people below. The ML Kishigo 1820 prints "7 anchor points certified to tether 25 lbs each with a maximum tether length of 54 in." to ANSI/ISEA 121-2018; the tool-tethering guide linked below explains the standard.

In plain words

  • A surveyor vest is a Class 2 vest with a solid front, a mesh back, a zipper and seven to twelve pockets for the gear; the class is the same as a plain vest, the cut is the price.
  • Breakaway vests pull apart if they snag; X-back vests cross the bands behind; black bottom vests put black where the dirt is; tool tethering vests have rated anchor points.
  • Mesh breathes, solid takes a logo and pens; hook-and-loop is cheap and forgiving, a zipper stays closed under load.
  • ML Kishigo prints every pocket, tab and closure on the product page; the label carries the class.
ML Kishigo product pages and spec sheets for the styles shown (kishigo.com, read Nov 12 2026)

Questions people ask

Is a surveyor vest Class 2 or Class 3?

Class 2 (ANSI/ISEA 107 Type R) on every ML Kishigo surveyor vest; a Class 3 shirt or jacket with it makes the night outfit.

How many pockets does a surveyor vest have?

Seven on the S5004 and S5008Z, eight on the women’s S5021 and S5022, twelve on the S5002, as ML Kishigo prints them.

What is a tear-away safety vest?

A breakaway vest: hook-and-loop at the shoulders, sides and front so the vest pulls apart if it snags; 5-point on the ML Kishigo 1805 and 1552B.

Why do some vests have an X on the back?

The X-back pattern crosses the two vertical bands; it outlines the body from behind and lies flat under a harness. The class does not change.

Are black bottom vests ANSI rated?

Yes; ML Kishigo labels its Premium Black Series Type R Class 2 or 3 because the fluorescent and reflective area on the upper body meets the standard.

Which vest for a tow truck driver?

A breakaway vest, Class 2 by day and Class 3 at night on the roadway; ML Kishigo lists "Towing" among the industries for its 1552B Class 3 breakaway.

What is a clear ID pocket for?

A credential or site badge, visible without removing it; the surveyor vests and the 1805 breakaway carry one on the chest.

Do you sell surveyor vests in women’s sizes?

Yes; the ML Kishigo S5021 (lime) and S5022 (orange) are women’s-cut surveyor vests with eight pockets.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need vests, shirts or jackets in a specific class or color?Call (925) 215-7337 or email us the crew size and the class the site asks for. We stock yellow-green and orange in every class and imprint logos on both. We sell nationwide.
Hi-vis selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.