Bayshore Safety & Industrial Supplies Guide
How do touchscreen work gloves work, and do they actually work? Conductive fingertips on coated, leather and winter work gloves, as the manufacturers describe them
A phone or tablet screen is capacitive: it reads the small change in its electrical field where a conductor, normally the skin of a fingertip, touches the glass, and an ordinary glove is an insulator that keeps the finger from completing that circuit, which is why the screen ignores a gloved hand. A touchscreen work glove puts a conductor back at the point of contact: a conductive yarn knitted into the fingertips, a conductive patch sewn on the index finger and thumb, or a coating formulated to conduct, so the screen reads the glove as it reads a finger. The manufacturers on this site describe the feature in those terms (PIP: “touchscreen compatible tips on the index and thumb” on its leather winter gloves and “topical touchscreen compatibility” on a coated knit; MCR Safety: a “touchscreen compatible palm and fingertip dip” on the NXG 9673; the four manufacturers mark it on 140 gloves on this site, across coated, leather, winter and disposable lines) and do not publish a test for it, because there is no standard that rates it. Do they actually work? They work when the conductive part is where the finger lands, the glove is dry or the coating is one that conducts when wet, and the screen is a capacitive one; they stop working when the fingertip wears through, when a thick liner lifts the conductor off the glass, and on a screen that rejects a large or soft contact. The material does not change the glove’s protection: a touchscreen cut glove still carries its ANSI/ISEA 105 cut level, an impact glove its ANSI/ISEA 138 level, and a disposable nitrile its thickness, which is why the product bands below are grouped by what the glove protects against, with the touchscreen feature as a second line.
MCR Safety CutPro 92735N Cut Resistant Gloves, ANSI A9, Nitrile CoatedMCR Safety lists this glove as touchscreen compatible at ANSI/ISEA 105 cut A9 (MCR Safety data)Why a glove blocks a screen and how the fix is made. The North Face’s own explanation of its touchscreen gloves is the plainest statement of the mechanism: capacitive screens rely on the skin to act as an electrical conductor; the screen is two layers of conducting glass, and when an electrical conductor such as a finger touches it the electrical field is altered at the point of touch; most glove materials are electrical insulators and cannot complete the circuit; touchscreen gloves solve this with conductive coatings or fabrics. Resistive screens, which register pressure, work with any glove thin enough, but phones and tablets are capacitive. Three constructions put the conductor where the finger lands. A knit glove can have a conductive yarn (a metal-plated or carbon-loaded filament) knitted into the fingertips or the whole liner; PIP calls the whole-glove version “topical touchscreen compatibility” and marks fingertip versions on the index and thumb. A cut-and-sewn leather or winter glove gets a conductive patch sewn to the index finger and thumb; Caiman lists “touchscreen compatible index finger, middle finger and thumb” on its deerskin winter glove and notes the exception for its smallest and largest sizes. A dipped glove can have the coating itself formulated to conduct; MCR Safety describes the NXG 9673 as a nitrile foam coated glove with a touchscreen compatible palm and fingertip dip, and PIP and Radians mark their disposable nitrile gloves touchscreen compatible because a thin nitrile film passes enough of the finger’s field to register. None of these is a rating. ANSI/ISEA 105 and 138 do not test touchscreen function and no manufacturer here publishes a figure for it; the claim is a feature statement, and it degrades the way the rest of the glove does, by wear at the fingertip. The questions “do touchscreen gloves actually work” and “why do touch screens not work with gloves on” are the same question from two sides: the screen needs a conductor, the glove is built to supply one, and it does so until the conductor wears away or is lifted off the glass by a thick liner or a loose fit.
The questions, one by one
From the manufacturers’ statements and the capacitive-screen explanation.
Reading a touchscreen glove page
What the lines on a touchscreen-marked glove page mean.
- Touchscreen: Yes, or “touchscreen compatible”: the manufacturer’s statement that the glove operates a capacitive screen. Some pages name the fingers (index and thumb; index, middle and thumb) or the method (fingertip dip, topical).
- Cut level, impact level, EN 511, thickness: the protection, unchanged by the feature; the guides on each rating explain them.
- Gauge: a 13, 15 or 18 gauge knit is thin enough for the conductive tip to press to the glass; a 7 or 10 gauge knit is thicker and is usually not marked touchscreen.
- Fingertip wear: the conductive element is at the point of most wear; a touchscreen glove that stops registering has usually worn through the tip, and the cut glove care guide covers when a glove is replaced.
- Wet and oily: a wet knit tip can register better or worse depending on the yarn; a foam nitrile dip that is oily usually still registers. The manufacturers publish no data on it.
- Sizes: the Caiman 2396 page excludes its smallest and largest sizes from the touchscreen statement; read the size line.
Touchscreen constructions and where each appears on this site
| Construction | How it conducts | Glove types | Manufacturers’ wording | Wear point |
|---|---|---|---|---|
| Conductive fingertips in a knit | Metal-plated or carbon-loaded yarn knitted into the tips | Coated knits, cut gloves, thin winter knits | PIP: “touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves”; MCR Safety: “touchscreen glove that can be used with smartphones” | Fingertips |
| Whole-liner conductive knit | Conductive yarn throughout the shell | Coated knits | PIP: “topical touchscreen compatibility”; MCR Safety: “touchscreen compatible palm and fingertip dip” (NXG 9673) | Palm and tips |
| Sewn conductive patch | Conductive fabric on the index finger and thumb | Leather winter gloves, mechanics gloves | PIP Omaha and Arctic TS: “touchscreen compatible tips on the index and thumb”; Caiman 2396: index, middle and thumb | Patch edges |
| Conductive film | Thin nitrile passes the finger’s field | Disposable nitrile | PIP Ambi-dex and Grippaz, Radians RWG94: “touchscreen compatible” | None; the glove is single-use |
No standard rates touchscreen function; every statement is the manufacturer’s description of a feature.
Source: The product descriptions on this site, as the manufacturers wrote them; The North Face FAQ for the capacitive mechanism.
More questions people ask
What are good touch screen gloves for cold weather?
A lined winter glove whose manufacturer states touchscreen capability. Armor Guys lists touchscreen on its Kyorene Pro 00-849, 00-849WP, 00-869 and 00-869WP winter styles (a 7-gauge poly-acrylic lining, EN 511 X2X, or X21 with the waterproof membrane on the WP styles), and not on its Extraflex winter styles; the band rows carry the figures each page prints.
Answers from the sources named in the byline; Armor Guys figures from the manufacturer’s product pages, spec sheets, catalog C.009 and workbook C.010 read Nov 12 2026.Questions people ask
How do touchscreen gloves work?
They put a conductor at the fingertip (conductive yarn, a sewn conductive patch or a conducting coating) so a capacitive screen, which reads the skin’s conductivity, registers the glove as it would a finger.
Why do touch screens not work with gloves on?
Phone and tablet screens are capacitive and need an electrical conductor at the point of touch; ordinary glove materials are insulators, so the finger’s field never reaches the glass.
What material is used for touch screen gloves?
The glove is any work glove material; the touchscreen element is a metal-plated or carbon-loaded yarn, a conductive fabric patch or a conductive dip. The manufacturers describe the feature rather than the fiber.
Do touchscreen gloves actually work?
Yes while the conductor is intact and pressed to the glass by a close fit; they stop when the fingertip wears through or a thick liner lifts it. No standard tests the feature, so the statement is the manufacturer’s description.
Can I use my iPhone with gloves?
With a glove marked touchscreen compatible, in the fingers the page names (all tips on most knits; index and thumb on the leather winter gloves). A plain glove will not register.
What are some good gloves for working with touchscreens in winter?
The insulated gloves that carry the statement: PIP’s Omaha and Arctic TS leather gloves and Caiman 2396 deerskin glove with touchscreen index finger and thumb, DEWALT’s DPG749, DPG751, DPG752 and DPG758 cold-weather gloves, Radians RWG27-series winter gloves. The EN 511 guide covers their cold ratings.
How do typing gloves work?
Thin knits with conductive fingertips on all fingers, the office version of the same construction; the industrial knits add a cut or abrasion rating.
Do touchscreen gloves lose the feature over time?
The conductive element sits at the fingertip, the point of most wear, so a glove that stops registering has usually worn through there; it is replaced as any worn glove is.
Does a touchscreen glove protect less?
No. The ANSI/ISEA 105 cut level, ANSI/ISEA 138 impact level or EN 511 cold rating is tested on the glove as sold; the conductor is a yarn or patch, not a change to the shell.
Which disposable gloves work with a touchscreen?
PIP’s Ambi-dex and Grippaz and Radians’ RWG94 and RWG96 nitrile gloves are marked touchscreen compatible: the thin film passes enough of the finger’s field to register.
What type of touch screens work with gloves?
Resistive screens, which register pressure, respond to any glove thin enough; capacitive screens (phones, tablets, most kiosks) need a conductive glove or a bare finger.
How do I make my gloves touchscreen compatible?
The manufacturers add the conductor in the knit, the patch or the dip at the factory; The North Face notes that sewing conductive thread into leather damages the glove. A glove bought with the feature is the answer the data supports.
Related guides
What are the four main types of work gloves?Leather, coated knit, cut-resistant and disposableWhat is a glove coating?Nitrile, polyurethane, latex and foam comparedWhat do ANSI cut levels A1 to A9 mean?The ANSI/ISEA 105 scaleCold-weather work glovesWhat the EN 511 ratings meanIs 18 gauge thinner than 13 gauge?What glove gauge meansNitrile vs latex vs vinyl glovesWhat each material resistsWhich gloves for handling extremely cold materials?Contact cold under EN 511 and what temperature calls for glovesThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
