Bayshore Safety & Industrial Supplies Guide
What are cotton gloves used for? Inspection gloves, canvas and jersey work gloves, string knits, hot mill and chore gloves, whether cotton gloves help dry hands, where to buy 100 percent cotton gloves, and what each weight means
Cotton gloves are the light-duty end of hand protection: a breathable, washable, reusable glove for work where the hazard is dirt, splinters, light abrasion, warm parts and handling marks rather than cuts, chemicals or crush. Liberty Safety describes its cotton line as "a breathable, flexible alternative to heavier-duty hand protection" for "low-hazard environments where comfort and dexterity matter most", and the line runs from a thin white inspection glove that keeps fingerprints off a part to a 36 oz hot mill glove that handles hot castings. The weight in ounces, the pattern (inspector, jersey, canvas, string knit, double palm, hot mill, chore, terry) and the cuff tell you which job each one is for. None of them carries an ANSI cut, chemical or impact rating, and that is the point: they are the glove for the jobs that do not need one.
Liberty Safety 4512 Cotton Gloves, 12 oz, Natural WhiteLiberty Safety prints 12 oz cotton/polyester canvas, clute pattern, straight thumb, knit wrist; sold by the dozenWhat a cotton glove is, and is not. OSHA’s hand protection rule, 29 CFR 1910.138, requires gloves where hands are exposed to "skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes", and asks the employer to pick the glove on "an evaluation of the performance characteristics of the hand protection relative to the task(s)". A cotton glove has no published performance characteristic against any of those hazards except, in the heavier hot mill and terry styles, moderate heat. So it is the glove for the work the hazard assessment finds to be light: handling clean parts, packing, warehouse picking, inspection, yard work, running a hot-mill line where a cast part is warm but not glowing. Cal/OSHA’s section 3384 even carves this out: hand protection for cuts, lacerations and abrasions "shall not be required when the employer’s personal protective equipment hazard assessment … determines that the risk of such injury to the employee’s hands is infrequent and superficial". That is the cotton glove’s territory.
Why the ounces matter. Cotton gloves are sold by fabric weight: the ounce figure is the weight of the cloth per square yard. Liberty Safety’s line runs 7 oz (a light jersey), 8, 9 and 10 oz (standard jersey and canvas), 12 oz (heavy canvas), 18 to 24 oz (double palm), 20 to 36 oz (hot mill) and 18 to 24 oz terry. Heavier cloth lasts longer, pads more and insulates more against warm parts; lighter cloth is cooler and more dexterous. The glove you buy by the dozen for a packing line is a 7 to 10 oz jersey; the one for a foundry’s cooling rack is a 30 oz hot mill.
The cotton glove patterns, in Liberty Safety’s words
Each pattern name is the manufacturer’s; the figures are from its product pages and spec sheets.
The questions, one by one
Each answer is from the manufacturer’s own product statements or the regulations named in the byline.
Do cotton gloves help dry hands?
The question comes from a skin-care routine, not a jobsite: a thin cotton glove worn overnight over a hand cream, so the cream stays on the skin instead of the pillow. Whether that helps a particular person’s skin is a question for a dermatologist, and nothing on a glove label answers it. What a safety supplier can tell you is which glove people buy for it: a thin, white, 100 percent cotton inspection glove (Liberty Safety’s 4401Q, 4411 or 4421Q, "100% cotton, two-piece reversible"), which is soft, breathable and washable, in men’s and ladies’ sizes by the dozen. At work the same glove is worn under a chemical or leather glove as a sweat liner, which is the other reason people ask.
What do cotton gloves protect against?
Dirt, splinters, light abrasion, handling marks, and (in the hot mill and terry weights) warm surfaces. Liberty Safety’s category page puts it as "low-hazard environments where comfort and dexterity matter most" with "moderate heat resistance" in "certain styles". They do not protect against cuts, chemicals, punctures, crush or electrical contact, and they soak up oil and water rather than shedding it. For any of those hazards the OSHA rule points to a glove with a published performance characteristic for it.
Are cotton gloves good for hands?
They are the most breathable work glove there is, which is why they are the usual liner and the usual glove for long shifts of light handling: cotton wicks sweat, does not trap heat the way a coated or rubber glove does, and washes. The trade-offs are that cotton holds water once wet, wears through fast on rough material, and offers no rated protection. Workers whose hands react to rubber or coatings often wear a cotton liner under the rated glove for that reason.
What are cotton gloves called?
By their pattern and job: inspection gloves (or inspector gloves, parade gloves, film-handling gloves), jersey gloves (brown jersey), canvas gloves, string knit gloves (poly/cotton knits), double palm gloves, hot mill gloves (mill gloves), chore gloves, terry gloves, and liner gloves when worn under another glove. "White cotton gloves" in a search usually means the inspection glove.
What are jersey gloves good for, and why are they called jersey gloves?
Jersey is the knit fabric they are cut from (the same weft-knit cloth as a jersey shirt), and the gloves are the light general-purpose work glove: packing, warehouse, yard, landscaping, driving, material handling where the material is not sharp. Liberty Safety cuts its jersey gloves in the clute pattern with a knit wrist in 7 to 13 oz; MCR Safety prints "good for laundering" on its brown jersey gloves, which is the other reason crews buy them, since they go through the wash.
Are jersey gloves warm?
A plain jersey glove is a single layer of knit cotton and is not a winter glove; it takes the chill off a cold morning and no more. The warm versions are the chore gloves with a two-layer fleece quilted palm and back (Liberty 4203Q, 4211, 4214) and the fleece-lined jersey (4308Q, "red fleece lined"); for real cold the manufacturers rate insulated gloves, and the cold-weather guide linked below explains the EN 511 figures.
What is the difference between 7 oz, 10 oz, 12 oz and 24 oz gloves?
The ounce figure is the cloth weight per square yard, so a 24 oz glove is more than three times the cloth of a 7 oz glove. 7 to 10 oz is light to standard jersey and canvas (dexterity, cool hands, short life on rough work); 12 oz is heavy canvas; 18 to 24 oz is double palm (a second layer on the palm only); 20 to 36 oz is hot mill, where the weight is the insulation against warm parts. Pick the weight by the roughness and heat of the material, not by the price.
What is a hot mill glove, and how hot can it handle?
A hot mill glove is a heavy cotton canvas glove, 20 to 36 oz, sewn nap-out so the fluffy face is toward the heat, with a band top or gauntlet cuff and usually a knuckle strap; the burlap-lined styles add a layer. The name comes from steel and textile mills. Liberty Safety does not print a temperature rating on them, and no cotton glove carries an ANSI/ISEA 105 heat level, so treat them as gloves for warm parts and short contact (castings on a cooling rack, trays, dies) and not for flame, molten metal or a rated contact-heat job; the heat-resistant glove guide linked below covers the rated gloves.
What are string knit gloves, and what does 7 gauge mean?
A string knit is a seamless glove knitted in one piece, like a sock, with an elastic knit wrist; gauge is the number of needles per inch on the knitting machine, so 7 gauge is a coarse, thick knit and 13 gauge a fine, thin one (the gauge guide linked below has the scale). Liberty Safety’s 7 gauge cotton/polyester knits are the warehouse and material-handling standard; the PVC-dotted versions add grip; the 13 gauge cotton and nylon knits are inspection and liner gloves.
Where can I get 100 percent cotton gloves?
From us, by the dozen (we sell nationwide): Liberty Safety’s 4401Q, 4411, 4421Q, 4621 and 4622 inspection gloves are printed "100% cotton" and come in men’s and ladies’ sizes, and the 4537C is a 100 percent cotton 13 gauge knit. Most jersey, canvas and hot mill gloves are a cotton/polyester blend, which is printed on the page; check the shell field if the job requires pure cotton (some finishing and photographic work does).
Are cotton gloves reusable, and can you wash them?
Yes on both counts; that is their advantage over disposables. Cotton gloves are sold as reusable work gloves and go through a normal wash; MCR Safety prints "good for laundering" on its jersey gloves, and Liberty Safety’s category page lists "reusability" as a feature of the line. Hot water and a dryer shrink cotton somewhat, so a crew that launders its gloves buys a size up or washes warm and air-dries. The work-glove cleaning guide linked below has the routine.
Why do people wear white cotton gloves?
Because white shows dirt and the thin cotton leaves no mark: curators, film handlers, jewelers, inspectors, parade and honor guards, waiters at formal service and anyone handling a finished surface wear them so the hands do not mark the object and the glove shows when it is soiled. The same glove is the inspection glove in a plant.
Do cotton gloves absorb lotion, and do they protect against chemicals?
Cotton absorbs whatever touches it, lotion included, which is why the overnight routine uses it and why it is the wrong glove for any liquid you do not want on your skin: a cotton glove soaked in a solvent holds the solvent against the hand. OSHA’s 1910.138 lists "skin absorption of harmful substances" and "chemical burns" as hazards that require hand protection selected for them, and that means a glove with chemical data, never cotton.
In plain words
- Cotton gloves are for light work: dirt, splinters, handling marks, warm parts. They carry no cut, chemical, impact or electrical rating.
- The ounce number is cloth weight: 7 to 10 oz jersey and canvas for general handling, 12 oz heavy canvas, 18 to 24 oz double palm for rough material, 20 to 36 oz hot mill for warm parts.
- Inspection gloves are the thin white 100 percent cotton (or nylon) gloves; the same glove is the sweat liner under a rated glove.
- String knits are seamless; 7 gauge is coarse and thick, 13 gauge fine and thin. PVC dots add grip.
- Chore gloves and fleece-lined jersey are the warm cotton gloves; real cold needs an insulated, rated glove.
- They are reusable and washable; wash warm and air-dry to limit shrinking.
- Sold by the dozen. We sell nationwide.
Questions people ask
What are cotton gloves used for?
Light work: inspection and handling of clean parts, packing, warehouse, yard work, and (in hot mill and terry weights) warm parts. They carry no cut, chemical or impact rating.
Do cotton gloves help dry hands?
People wear a thin cotton inspection glove overnight over hand cream; whether it helps is a question for a dermatologist. The glove itself is a soft, washable 100 percent cotton inspection glove.
What do cotton gloves protect against?
Dirt, splinters, light abrasion and handling marks; hot mill and terry weights handle warm surfaces. Not cuts, chemicals, punctures or crush.
What are cotton gloves called?
Inspection gloves, jersey gloves, canvas gloves, string knits, double palm, hot mill, chore and terry gloves, by pattern.
What is a hot mill glove?
A 20 to 36 oz nap-out cotton canvas glove with a band top or gauntlet cuff for warm castings, trays and dies; no ANSI heat level is printed on it.
What does 7 gauge mean on a string knit?
Seven needles per inch: a coarse, thick knit. 13 gauge is fine and thin.
Are jersey gloves warm?
A plain jersey glove is not a winter glove; chore gloves with a fleece quilted palm and the fleece-lined jersey are the warm cotton styles.
Why are they called jersey gloves?
They are cut from jersey, the weft-knit cotton cloth of a jersey shirt.
Where can I get 100 percent cotton gloves?
From us, by the dozen: Liberty Safety’s inspection gloves are printed 100% cotton; most jersey and canvas gloves are a cotton/polyester blend.
Are cotton gloves reusable?
Yes; they are sold as reusable, washable work gloves. Wash warm and air-dry to limit shrinking.
Why do people wear white cotton gloves?
To keep hands from marking a finished surface and to show soil: inspectors, curators, film handlers, honor guards and formal service.
Do cotton gloves protect against chemicals?
No; cotton absorbs liquids and holds them against the skin. OSHA 1910.138 calls for a glove selected for the chemical.
What is a double palm glove?
A canvas or jersey glove with a second layer sewn over the palm, 18 to 24 oz, for rough material.
Does OSHA require gloves for light handling?
Only where the hazard assessment finds a hazard in 1910.138(a); Cal/OSHA 3384 does not require cut and abrasion gloves where the risk is infrequent and superficial.
Related guides
What are the four main types of work gloves?Leather, coated knit, cut-resistant and disposableIs 18 gauge thinner than 13 gauge?What glove gauge meansHeat-resistant glovesThe ANSI/ISEA 105 heat and flame levelsCold-weather work glovesWhat the EN 511 ratings meanHow do you clean work gloves, and how often should you replace them?Coated, cotton, leather and gardening glovesHard hats for cold weatherWinter liners and what they do to fitOSHA hand protection requirementsWhat 1910.138 saysThe ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.
© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.
