Skip to main content
Home › Guides › Protective clothing › Why lab coats are white
Guide · Protective clothing · Lab coats

Bayshore Safety & Industrial Supplies Guide

Why are lab coats white? The reasons people list, black and colored lab coats, when a lab coat is worn and whether OSHA requires one, the three types, what they are made of, disposable lab coats, fit, washing and what one costs

Lab coats are white for practical reasons that have hardened into a tradition: white shows every splash, stain and burn, so contamination is seen and the coat is changed; white cotton and polyester-cotton can be washed hot and bleached, which colored cloth cannot; white reflects heat and light in a bright room; and since the late nineteenth century, when physicians and chemists adopted the white coat to signal cleanliness and the laboratory method, white has been the color that says "laboratory". None of that is a rule. No OSHA standard names a color, black and colored lab coats are sold and worn (veterinary, dental and industrial labs often pick a color to hide stains or code a department), and the disposable lab coats in the band below are white because the polypropylene and film fabrics are made white, not because a standard says so. What the rules do require is the coat itself, where the hazard assessment finds a splash, dust or contact hazard: OSHA’s 1910.132 for any workplace, and 1910.1450, the laboratory standard, which requires the employer’s Chemical Hygiene Plan to set "criteria that the employer will use to determine and implement control measures to reduce employee exposure to hazardous chemicals including … personal protective equipment".

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · Liberty Safety product pages, spec sheets and category pages (libertysafety.com, read Nov 11 2026); 29 CFR 1910.132 Personal protective equipment, general requirements (eCFR, saved Nov 9 2026); 29 CFR 1910.1450 Occupational exposure to hazardous chemicals in laboratories (eCFR, saved Nov 11 2026)
Liberty Safety ProGard 19311 Lab Coat, SMS, Serged Seams, White, 7 SizesLiberty Safety ProGard 19311 Lab Coat, SMS, Serged Seams, White, 7 SizesLiberty Safety prints SMS, 50 g, serged seams, knit collar and cuffs, three pockets, front snaps; 25 per case

The ten reasons, sorted. The "10 reasons lab coats are white" lists that circulate are a mix of three real reasons and seven restatements of them. The real ones: (1) white shows contamination, so a splash or a spill is seen and the coat comes off; (2) white cloth can be washed hot and bleached, which kills what is on it and lifts stains that colored cloth would hide and keep; (3) white reflects heat and light, which matters under lamps and in a warm lab. The restatements: it looks clean, it signals professionalism, it is the uniform patients and students recognize, it is traditional, it is neutral, it is cheap to make (undyed), and it is easy to see across a room. Add the history: the white coat came in with the laboratory and the germ theory in the 1800s, when physicians who had worn black (the color of the clergy and of formal dress) switched to white to mark medicine as a science. That is the whole list.

What the regulations require, and do not. OSHA’s 1910.132(a) requires protective clothing "wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants"; (d) requires the hazard assessment that decides it; and the laboratory standard, 1910.1450, requires a written Chemical Hygiene Plan with "criteria … to determine and implement control measures … including engineering controls, the use of personal protective equipment and hygiene practices". A lab coat is one of those control measures where a splash or contact hazard exists. No paragraph names the coat’s color, length, fabric or closure; the employer’s plan does, from the hazard.

The three types of lab coat, and the fabrics

The fabric figures are Liberty Safety’s; the reusable coats are from the other lines we carry.

Reusable woven lab coats (cotton, polyester-cotton)The classic white coat: knee length, long sleeves, buttons or snaps, pockets, launderable hundreds of times. Cotton for comfort and for work near flame (polyester melts); polyester-cotton for wrinkle resistance and stain release. The coat for a teaching lab, a clinic or a quality lab that launders.
Disposable lab coats (polypropylene, SMS, microporous film)The coat for visitors, contract staff, food plants, pharmacies, clean areas and any lab that does not want to launder a contaminated coat. Liberty Safety’s PolyGard 15300 is 28 g spunbonded polypropylene (light, breathable, dry particles); the ProGard 19311 and 19300 are 50 g SMS (spunbond-meltblown-spunbond, a better particle and light-splash barrier); the PermaGard 18300 and 18301 are 63 g microporous film over polypropylene ("MPF over SBPP"), the liquid-splash fabric. All white, serged seams, snap front, sized S to 5XL by style.
Specialty coats: FR, chemical, barrier and clean-roomFlame-resistant lab coats for work near flame or arc (an FR rating on the label, never a plain polyester coat); chemical-splash coats of laminated film for the chemical hazard a Tychem-class fabric is tested for; fluid-resistant barrier coats for blood and body fluids (ASTM F1670 and F1671); and clean-room frocks of low-linting polyester. Each is picked by the hazard, and the coverall guides linked below explain the fabric tests.
Black and colored lab coatsSold and worn, mostly in woven reusable fabrics: black and navy in dental, veterinary and some engineering labs to hide stains and coffee, colors to code departments or student years. A colored coat is no less protective; it is less able to show contamination, which is the trade. Disposable coats are white or blue because the fabrics are made in those colors.

The questions, one by one

Each answer is from the regulations and the manufacturer’s statements named in the byline.

What are the 10 reasons why lab coats are white?

Three real reasons and their restatements: white shows contamination (so a splash is seen and the coat is changed); white can be washed hot and bleached; white reflects heat and light; it looks clean; it signals the laboratory and the profession; it is recognizable to patients and students; it is traditional since the 1800s; it is neutral; it is cheap (undyed); and it is easy to see. The first three are the ones that matter in a safety program; the rest are why the tradition has held.

Are there black lab coats, and what does a black lab coat mean?

Yes; black, navy, gray and colored lab coats are made in the woven reusable fabrics and worn in dental and veterinary practices, engineering and materials labs, and anywhere stains are the daily problem. A black coat means only that the wearer or the employer chose it: there is no rule or rank attached, though some schools and labs use color to mark a department or a year. A black coat hides contamination instead of showing it, which is the reason chemical and biological labs stay with white.

When should lab coats be worn in a laboratory, and are lab coat requirements OSHA?

Whenever the hazard assessment finds a splash, spill, dust or contact hazard to the body or the clothes under it, which in a working chemistry, biology or clinical lab is whenever hazardous materials are handled. OSHA does not have a lab-coat paragraph; it has 1910.132 (protective clothing where hazards require it, selected by a documented hazard assessment) and, for laboratories, 1910.1450, which requires the Chemical Hygiene Plan to set the criteria for control measures "including … personal protective equipment". The lab’s plan is what says "coat on in the lab, coat off at the door". Cal/OSHA’s section 3380 reads the same way for California.

What are the three types of lab coats?

Reusable woven coats (cotton or polyester-cotton, laundered), disposable nonwoven coats (polypropylene, SMS or microporous film, worn and discarded), and specialty coats rated for a hazard (flame-resistant, chemical-splash, fluid-barrier, clean-room). People also sort them by cut: the traditional knee-length coat, the shorter consultation jacket, and the wrap or howie coat with a side closure.

What material are lab coats made of?

Reusable: 100 percent cotton (comfortable, launders hot, does not melt), polyester-cotton blends (wrinkle- and stain-resistant), and FR-treated or inherently FR fabrics for flame. Disposable: spunbonded polypropylene (Liberty Safety PolyGard, 28 g), SMS (ProGard, 50 g) and microporous film laminated to polypropylene (PermaGard, 63 g, "MPF over SBPP"), the same fabrics as the disposable coveralls; the coverall fabric guide linked below has what each one is tested for.

How much do lab coats usually cost, and what is the price of a lab coat?

Disposable coats cost by the case: on our rows today Liberty Safety’s PolyGard 15300 polypropylene is $33.99 for 30 (about $1.13 a coat), the ProGard 19311 SMS $55.99 for 25 ($2.24), the ProGard 19300 $89.99 for 30 ($3.00), and the PermaGard 18300 and 18301 microporous film $69.99 and $75.49 for 30 ($2.33 to $2.52). Reusable woven coats run roughly $15 to $50 each at supply prices and more with embroidery; an FR or chemical coat is more again. The live price is on each row below.

Can I wear a lab coat in public?

The safety answer is no: a coat worn in the lab is PPE that may carry what the lab handles, and the standard hygiene rule in every Chemical Hygiene Plan is that it stays in the lab, with a clean one for the office and the cafeteria. OSHA’s 1910.1450 Appendix A (the National Research Council guidance OSHA reproduces) is the usual source of that rule. As clothing it is legal to wear anywhere; as PPE it belongs where the hazard is.

What can I use instead of a lab coat?

For the protection the hazard assessment calls for: a disposable coverall (more coverage), a chemical apron over sleeves (for a splash hazard at the front), a smock or shop coat (for dust and dirt, not chemicals), or a fluid-barrier gown (for blood and body fluids). For a school lab with no hazard beyond stains, any long-sleeved cotton overgarment does the job of a coat. Nothing replaces an FR coat where flame is the hazard.

How often should lab coats be washed, and how do you get chemical stains out?

Reusable coats: as often as they are soiled, at least weekly in a working lab, and immediately after any splash; the employer launders a contaminated coat (taking it home is the practice every plan bans). Disposable coats are not washed; they are discarded when soiled or at the end of the shift or task. A chemical stain that does not come out in a hot wash with an oxygen bleach is a coat that has absorbed the chemical, and the coat is replaced.

What is my lab coat size, what length should a lab coat be, and how is it meant to fit?

Lab coats are sized by chest like a jacket: measure around the fullest part of the chest over the clothes you wear under it and take the size whose range covers it, up a size for a thick sweater. A traditional coat reaches the knee (the 38 to 42 inch coat); a consultation jacket the hip. Sleeves to the wrist with the arms down, so the cuff meets the glove; a knit cuff (Liberty Safety’s ProGard 19311) keeps the sleeve from riding up into the work. Disposable coats are sized S to 5XL and run full; the coverall size chart guide linked below has the measurements.

Why do lab coats have holes in the sides?

The side vents or slits on a traditional coat are pass-throughs to the trouser pockets under the coat, and the gap at the hem lets the wearer sit and climb stairs. Disposable coats skip them: a slit is an opening for a splash.

Do nurses use lab coats, and what is a lab gown?

Nurses wear scrubs; the lab coat in a clinic is the physician’s, the pharmacist’s and the lab technician’s, and a nurse puts one on for the same reason anyone does, over the uniform in a lab or a clean area. A lab gown (an isolation or barrier gown) ties at the back, covers more and is fluid-resistant; it is the garment for blood and body-fluid work under 1910.1030, and the bloodborne-pathogen garment guide linked below covers the F1670 and F1671 ratings.

Is a lab coat PPE, and is lab coat one word or two?

A lab coat worn against a workplace hazard is personal protective equipment under 1910.132 (protective clothing is named in paragraph (a)), and the employer provides it and pays for it under 1910.132(h); a coat worn as a uniform with no hazard behind it is clothing. Two words: lab coat (laboratory coat); the trade also writes labcoat on labels and in part names.

In plain words

  • White shows contamination, washes hot and bleaches, reflects heat, and has meant "laboratory" since the 1800s. No rule requires the color.
  • OSHA 1910.132 requires protective clothing where the hazard assessment finds a hazard; 1910.1450 requires the lab’s Chemical Hygiene Plan to set the PPE criteria. Neither names a color, length or fabric.
  • Three types: reusable woven (cotton, poly-cotton), disposable nonwoven (polypropylene, SMS, microporous film), and specialty (FR, chemical, fluid barrier, clean room).
  • Black and colored coats exist and protect the same; they hide contamination instead of showing it.
  • Disposable coats cost about $1.13 to $3.00 each by the case on our rows today; reusable coats $15 to $50 at supply prices.
  • A lab coat stays in the lab; a contaminated coat is laundered by the employer or discarded.
  • Sized by chest, knee length, sleeves to the wrist. We sell nationwide by the case.
29 CFR 1910.132 Personal protective equipment, general requirements (eCFR, saved Nov 9 2026); 29 CFR 1910.1450 Occupational exposure to hazardous chemicals in laboratories (eCFR, saved Nov 11 2026); Liberty Safety product pages, spec sheets and category pages (libertysafety.com, read Nov 11 2026)

Questions people ask

Why are lab coats white?

White shows contamination, washes hot and bleaches, reflects heat and light, and has signaled the laboratory since the 1800s. No standard requires the color.

Are there black lab coats?

Yes, in woven reusable fabrics, worn where stains are the daily problem; they protect the same and hide contamination instead of showing it.

Does OSHA require a lab coat?

OSHA 1910.132 requires protective clothing where the hazard assessment finds a hazard, and 1910.1450 requires the lab’s Chemical Hygiene Plan to set the PPE; no paragraph names the coat.

When should a lab coat be worn?

Whenever hazardous materials are handled, per the lab’s plan; coat on in the lab, off at the door.

What are the three types of lab coats?

Reusable woven, disposable nonwoven, and specialty rated coats (FR, chemical, fluid barrier, clean room).

What are lab coats made of?

Cotton or polyester-cotton (reusable); spunbonded polypropylene, SMS or microporous film (disposable); FR or laminated fabrics (specialty).

How much does a lab coat cost?

Disposable about $1.13 to $3.00 each by the case on our rows; reusable $15 to $50 at supply prices; FR and chemical coats more.

Can I wear a lab coat in public?

Not one worn in the lab; it may carry what the lab handles. A clean coat for the office is the usual rule.

How often should lab coats be washed?

As soiled, at least weekly in a working lab, and at once after a splash; disposables are discarded.

How should a lab coat fit?

By chest size, knee length, sleeves to the wrist so the cuff meets the glove.

What can I use instead of a lab coat?

A disposable coverall, a chemical apron with sleeves, a shop coat for dust, or a barrier gown for body fluids, by the hazard.

Is a lab coat PPE?

When worn against a workplace hazard, yes, under 1910.132, and the employer provides it.

Why do lab coats have holes in the sides?

Pass-throughs to the trouser pockets and room to sit; disposable coats omit them.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Ordering protective clothing for a crew or a plant?Call (925) 215-7337 or email us the crew size, the work and the sizes and we will quote coveralls, lab coats, aprons, bouffants and covers by the case. We sell nationwide.
Disposable garment selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.