Skip to main content
DBI-SALA®

3M DBI-SALA 2104550 Anchor Plate, Steel, Zinc Plated Steel, Reusable

Item # 2104550 ⚠ Prop 65
$253.00

3M DBI-SALA anchor plate, part number 2104550. 3M lists it as "3M DBI-SALA Steel Plate Anchor 2104550, 1 EA". 3M DBI-SALA Steel Plate Anchors with D-ring fits 3/8 in, as 3M describes it. 3M states a capacity of 310 lb under ANSI and 420 lb under OSHA. 3M lists OSHA 1910.140 and OSHA 1926.502 for it. Sold by the each · 1 anchor plate. Ships in 1–2 business days; most orders arrive in 3–7 business days.

See the 3M page for 3M DBI-SALA Steel Plate Anchor.

3M DBI-SALA 2104550 specifications

Item3M data
Part number2104550
3M stock number7100188847
3M product family3M DBI-SALA Steel Plate Anchor
TypeAnchor Plate
As 3M lists it3M DBI-SALA Steel Plate Anchor 2104550, 1 EA
Capacity (ANSI)310 lb
Capacity (OSHA)420 lb
Anchor Install TypeReusable
MaterialZinc Plated Steel
Sold byEach (1)
Prop 65 warningYes

Source: 3M product page (3M DBI-SALA Steel Plate Anchor). Figures are as the manufacturer publishes them for the part; the family page lists the options across the family and the part number fixes the configuration.

Ratings and standards

StandardWhat it covers
OSHA 1910.140Personal fall protection systems (general industry)
OSHA 1926.502Fall protection systems criteria and practices (construction)

Source: 3M product page (3M DBI-SALA Steel Plate Anchor). Ratings are as published by the manufacturer for this part; they are not a hazard assessment for any site.

Connections and compatibility, as 3M states them

Item3M data
Anchor Install TypeReusable

Source: 3M product page (3M DBI-SALA Steel Plate Anchor). The connection, anchorage and user-count statements are the manufacturer's; the complete system is the one 3M's user instructions describe.

3M DBI-SALA Steel Plate Anchor, as 3M describes it

  • High strength steel construction
  • This safety equipment is designed for use with additional personal protective equipment (PPE)
  • Compatible with various fall arrest systems
  • Set-screw design installs onto 3/8 in. to 1 in. thick (9.5-25.4 mm) plate steel
  • Integral D-ring tie-off point

Source: 3M product page (3M DBI-SALA Steel Plate Anchor). Wording is the manufacturer's; lines that make a claim rather than state a fact are left out.

What you get

One anchor plate. Sold by the each · 1 anchor plate.

3M DBI-SALA 2104550 questions

What is the 3M DBI-SALA anchor plate? 3M lists part 2104550 as "3M DBI-SALA Steel Plate Anchor 2104550, 1 EA". 3M DBI-SALA Steel Plate Anchors with D-ring fits 3/8 in, as 3M describes it.

What standards does 3M list for the anchor plate? 3M lists OSHA 1910.140 and OSHA 1926.502 for part 2104550. The ratings are the manufacturer's for this part, not a hazard assessment for any site.

How much weight can a harness hold? 3M states a capacity of 310 lb under ANSI and 420 lb under OSHA. The ANSI figure is the ANSI/ASSP Z359 user range (tools included); the OSHA figure is the manufacturer rating under 1926.502.

What are the OSHA requirements for anchor points? The anchorage must meet 1926.502(d)(15): 5,000 lb per attached employee, or a 2:1 safety factor under a qualified person. 3M lists OSHA 1910.140 and OSHA 1926.502 for part 2104550 and a capacity of 310 lb.

How is part 2104550 sold? Sold by the each · 1 anchor plate. One unit per order line.

Guides: What is an anchor point, and what must it hold · Temporary, permanent and engineered anchors · Roof anchors by roof type · Beam anchors for fall protection · How do you tie off on a roof · When is fall protection required.

3M DBI-SALA Steel Plate Anchor documents

Source: 3M product page resources and the 3M user instructions; each link opens the 3M document.

Manufacturer item number: 2104550. 3M stock number: 7100188847.

Usually ships in 1–2 business days; delivery in 3–7 business days.

Adding to cart… The item has been added

Sold by Bayshore Safety

Sold by the Each
Specifications
Product TypeAnchor Plate
Model3M DBI-SALA Steel Plate Anchor
3M Part Number2104550
3M Stock Number7100188847
MaterialZinc Plated Steel
ANSI Weight Capacity310 lb
Capacity310 lb
OSHA Weight Capacity420 lb
Install TypeReusable
StandardsOSHA 1910.140; OSHA 1926.502
Pack Quantity1
Prop 65 WarningYes
Shipping & returns

In-stock orders: 1–2 business days to process, then 2–5 business days by UPS Ground (3–7 in all); the ground rate is shown at checkout. Most items can be returned within 30 days in new, resalable condition; respirators, filters and other hygiene items are final sale. Shipping policy · Returns policy

3M DBI-SALA 2104550 Anchor Plate, Steel, Zinc Plated Steel, Reusable$253.00

More DBI-SALA® and other brands in this category

Reviews

No reviews yet. Used this on the job? Tell other crews how it held up.

Write a review ›
How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.