Skip to main content
Home › Guides › Hand protection › What construction gloves cost
Guide · Hand protection · Buying by the dozen

Bayshore Safety & Industrial Supplies Guide

How much do construction gloves cost? What a pair of coated knit, cut-resistant, impact and winter work gloves costs at our current prices, sold by the dozen, cost per wear, who pays under OSHA 1910.132(h), and gloves for cement

Work gloves are sold by the dozen pairs, and the price that matters is the pair: at our current prices an Armor Guys general-purpose coated knit with no cut level printed is $1.34 to $3.41 a pair ($16.06 to $40.98 a dozen), a cut-resistant A2 to A3 knit is $2.34 to $11.34 a pair, an A4 is $4.71 to $18.15 a pair ($56.49 to $217.85 a dozen), an A5 or A6 is $5.80 to $14.20, an A7 to A9 is $13.14 to $22.52, an ANSI/ISEA 138 impact glove is $8.65 to $29.81 and a lined winter glove is $5.18 to $20.65 a pair. Armor Guys prints the packaging rule in its workbook: "Gloves are packaged and sold by the dozen" and "pricing per product remains the same for all sizes", so a 2XL costs what a medium costs. The figure that moves the price is the cut level, then the impact back, then the lining; the coating and the gauge move it less. Under 29 CFR 1910.132(h) the employer pays for the gloves the hazard assessment requires, so the cost is the crew’s cost per wear, not the worker’s.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · Our prices on this site, read Nov 12 2026; Armor Guys Product Knowledge Workbook C.010, page 13, "Packaging, pricing and value added services" (armorguys.com/downloads/resources/C.010-V1-Product-Knowledge-Workbook-PQ.pdf, read Nov 12 2026); Armor Guys product pages and spec sheets for the styles shown (armorguys.com, read Nov 12 2026); 29 CFR 1910.132 Personal protective equipment, general requirements (eCFR, saved Nov 12 2026)
Armor Guys 12-400 Basetek Plus Cut Resistant Gloves, ANSI A4, Foam Nitrile PalmArmor Guys 12-400 Basetek Plus Cut Resistant Gloves, ANSI A4, Foam Nitrile PalmThe Armor Guys Basetek Plus 12-400 is an 18-gauge A4 knit with a micro-foam nitrile palm and a touchscreen fingertip at $56.49 a dozen, $4.71 a pair

Why the dozen. Every work glove manufacturer in the band packs by the dozen pairs, and Armor Guys says so in its workbook; the price on each product page here is the dozen price, and the band rows carry it that way, with the pair price in the text. The reason is wear: a coated knit on a framing crew lasts days, not months, and a job buys gloves the way it buys blades. That is also why "how much does a pair cost" is the wrong question for a crew and "what does a week cost" is the right one. Armor Guys’ own product FAQ puts it the same way: "Track cost per wear during a sample trial rather than comparing only unit price."

What moves the price. Within the Armor Guys line the same 18-gauge micro-foam nitrile glove runs from $2.34 a pair at A1 to A3, to $18.15 at A4, to the top of the A7 to A9 range at $22.52: the yarn that earns the cut level is the cost. An impact back adds the next step, a 7-gauge poly-acrylic lining the next, and a waterproof membrane the one after that; a hi-vis color, a dotted palm or a knuckle coat adds a little. A polyurethane palm and a micro-foam nitrile palm at the same cut level are priced the same on most Armor Guys styles. The graphene Kyorene styles sit above the Basetek and Extraflex styles at the same cut level, which is the line’s own structure, not ours.

The questions in short

Prices are our current prices, per dozen pairs, read Nov 12 2026; the long answers follow.

How much do construction gloves cost?$1.34 to $3.41 a pair for a coated knit with no cut level, $4.71 to $18.15 for an A4 cut-resistant glove, $8.65 to $29.81 for an impact glove, $5.18 to $20.65 for a winter glove, all sold by the dozen.
Who pays for them?The employer, under 29 CFR 1910.132(h), for the gloves the hazard assessment requires; ordinary gloves worn solely against the weather are an exception in (h)(4)(iii), as is replacement of gloves lost or damaged on purpose.
What are good workman’s gloves?The ones with the figures the job needs printed on them and a fit the crew keeps on: a cut level for edges, an impact level for crush, a lining for cold, a grip coating for wet or oil.
What are the strongest work gloves?"Strongest" is not a figure. The printed ones are cut A1 to A9, abrasion 0 to 6, puncture 1 to 5 and impact 1 to 3; the top of each scale is the answer for that hazard.
Gloves for handling cement?A liquid-proof glove with a cuff for wet concrete and mortar, which is caustic; the concrete group in the band lists them, and the trade guide linked below covers it.
Is a cheaper glove cheaper?Only per pair. Per wear, a glove that lasts the week at twice the price costs less than one that lasts two days.
Does size change the price?Not at Armor Guys: "pricing per product remains the same for all sizes" is printed in the workbook, and our dozen price is one price per style.
Can I buy one pair?Most styles here are sold by the dozen; the Perfotek 07-002 is sold by the pair. Call or email for case pricing on a crew order.

The questions, one by one

Each answer uses our current prices and the Armor Guys workbook, FAQ and product pages, and the OSHA text, named in the byline.

How much do construction gloves cost, by type?

At our current prices for the Armor Guys line, sold by the dozen pairs: general-purpose coated knits with no cut level printed, the Duty and Extraflex 04-00x styles, $1.34 to $3.41 a pair; cut-resistant A1 to A3, $2.34 to $11.34 a pair; A4, where most sheet metal, demolition and glass work starts, $4.71 to $18.15 a pair; A5 and A6, $5.80 to $14.20; A7 to A9 for steel processing and recycling, $13.14 to $22.52; ANSI/ISEA 138 impact gloves, $8.65 to $29.81; lined winter gloves with an EN 511 code, $5.18 to $20.65. The other manufacturers in the comparison group price in the same bands for the same figures; the band shows their dozen prices as listed.

What are good workman’s gloves, and which work gloves are on the market?

The trade splits work gloves into leather, coated knit, cut-resistant knit, impact, winter and disposable, and the types guide linked below walks each. For a general construction crew the day-to-day glove is a coated knit: a nylon or polyester shell at 13 or 15 gauge with a nitrile, foam nitrile, polyurethane or latex palm, no cut level, cheap enough to replace when the palm wears. The step up is the same glove on a cut-rated shell, A2 to A4, for anyone handling sheet metal, strapping, glass, rebar ties or demolition. Impact gloves go on the hands that get crushed, pipe, concrete forms, rigging. The glove is "good" when the figure matches the hazard and the crew keeps it on; Armor Guys’ FAQ lists the signs of a glove that comes off, fingertip bunching, slipping, pressure points, fatigue.

What are the strongest work gloves available?

There is no "strength" test for gloves, so the word has to be unpacked into the figures manufacturers print. Against a blade, cut level A9 (6,000 grams and up on the TDM-100 test); Armor Guys prints A9 on the Kyorene Pro 00-890 and 00-897 and the Perfotek 07-002. Against rubbing through, abrasion level 6 (20,000 revolutions); Armor Guys prints 6 on the Extraflex Plus 14-400 and 14-420 and the Kyorene Pro winter styles among others. Against a point, puncture level 5 (150 newtons); the Extraflex Plus 14-400, 14-420, 14-500 and 14-520 print it. Against a blow to the knuckles, ANSI/ISEA 138 level 3, the top; the Armor Guys impact styles print level 1 and level 2. No one glove tops every scale, and the ones near the top of several are the most expensive in the band.

Which gloves for handling cement, concrete and mortar?

Wet cement is alkaline and burns skin on contact, and it wets through a knit, so the glove is a liquid-proof one with a cuff, not a cut glove: supported nitrile, PVC or neoprene, as the concrete group in the band and the trade guide linked below show. Armor Guys’ liquid-proof style is the Chemiflex 05-003, a flock-lined 15 mil nitrile with EN ISO 374-1 and 374-5 markings as printed, listed for chemical processing and printing; for form work and rebar after the pour, a coated knit or a cut-rated A4 with a nitrile palm, which keeps oil and water off the hand but does not seal it.

Who pays for work gloves under OSHA?

29 CFR 1910.132(h)(1) requires the employer to provide, at no cost to employees, the protective equipment used to meet the standard, which includes the gloves the hand protection rule 1910.138 and the hazard assessment call for. The exceptions in 1910.132(h) are non-specialty safety-toe footwear and prescription safety eyewear the employee may wear off site, everyday clothing, replacement of equipment the employee has lost or intentionally damaged, and, in (h)(4)(iii), ordinary items "used solely for protection from weather, such as winter coats, jackets, gloves, parkas", so a plain winter glove worn only against the cold is the employer’s call, while a cut-rated or impact-rated winter glove the assessment requires is the employer’s cost. The who-pays guide linked below covers the detail; the point for a glove budget is that the cost is the crew’s, so per-wear cost is the number to track.

How do you work out cost per wear?

Divide the pair price by the shifts a pair lasts on the task. Armor Guys’ product FAQ says wear life "depends on abrasion, cut exposure, coating contact, laundering, and replacement policy" and tells buyers to track cost per wear during a trial; its care page says laundering depends on the liner and coating of the specific style. A sample trial of a dozen on one crew for a week, with the replacements counted, gives the number; a glove that costs twice as much and lasts three times as long wins, and one that comes off the hand for detailed work costs more than its price.

Does the price change with size, color or touchscreen?

Size, no: Armor Guys prints that pricing is the same for all sizes, and our dozen price is one price per style. Color, a little: the hi-vis versions of a style are priced close to the plain ones. Touchscreen fingertips are part of the knit on the styles that have them and are not a separate charge. The real steps are the cut level, the impact back, the lining and the membrane, in that order.

In plain words

  • Work gloves are sold by the dozen pairs; at our current prices an Armor Guys coated knit is $1.34 to $3.41 a pair, an A4 cut-resistant glove $4.71 to $18.15, an impact glove $8.65 to $29.81, a winter glove $5.18 to $20.65.
  • The cut level sets the price, then the impact back, then the lining and a waterproof membrane. Size does not change it.
  • The employer pays for required gloves under OSHA 1910.132(h); the number to watch is cost per wear, not the pair price.
  • "Strongest" is four printed figures: cut A9, abrasion 6, puncture 5, impact level 3. No one glove tops them all.
  • Wet cement calls for a liquid-proof glove with a cuff, not a cut glove.
Our prices on this site, read Nov 12 2026; Armor Guys Product Knowledge Workbook C.010, page 13, "Packaging, pricing and value added services" (armorguys.com/downloads/resources/C.010-V1-Product-Knowledge-Workbook-PQ.pdf, read Nov 12 2026)

Questions people ask

How much do construction gloves cost?

At our current prices, $1.34 to $3.41 a pair for a coated knit with no cut level, $4.71 to $18.15 for an A4 cut-resistant glove, $8.65 to $29.81 for an impact glove and $5.18 to $20.65 for a winter glove, sold by the dozen.

Why are work gloves sold by the dozen?

Every manufacturer packs them that way; Armor Guys prints "Gloves are packaged and sold by the dozen" in its workbook, because crews use them up.

Does glove size change the price?

No; Armor Guys prints that pricing is the same for all sizes, and our dozen price is one price per style.

Who pays for work gloves?

The employer, under 29 CFR 1910.132(h), for gloves the hazard assessment requires; ordinary gloves worn solely against the weather are an exception in (h)(4)(iii).

What is the strongest work glove?

There is no strength figure; the printed scales are cut A1 to A9, abrasion 0 to 6, puncture 1 to 5 and ANSI/ISEA 138 impact 1 to 3.

What gloves for cement?

A liquid-proof glove with a cuff (supported nitrile, PVC or neoprene); wet cement is caustic and soaks through a knit.

What is cost per wear?

The pair price divided by the shifts the pair lasts on the task; Armor Guys’ FAQ tells buyers to track it in a trial rather than the unit price.

Can I buy a single pair?

Most styles are sold by the dozen; the Armor Guys Perfotek 07-002 is sold by the pair.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need gloves matched to a crew’s work?Call (925) 215-7337 or email us the task, the hazard and the sizes and we will quote by the dozen or the case with the manufacturer’s ratings listed. We sell nationwide.
Work glove selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.