Skip to main content
Home › Guides › Hand protection › Rubber gloves for cleaning
Guide · Hand protection · Rubber and chemical gloves

Bayshore Safety & Industrial Supplies Guide

What are the different types of rubber gloves, and which gloves for cleaning, dishes and bleach? Latex, nitrile, neoprene and PVC, reusable vs disposable, washing and reusing rubber gloves, static, disposal, resin, paint thinner and PVC glue

Rubber gloves come in four materials and two constructions, and the pairing decides the job. The materials: natural rubber latex (stretchy, grippy, the yellow dish glove, degraded by oils and solvents), nitrile (synthetic, no latex proteins, resists oils, fuels, many solvents and punctures), neoprene (synthetic, broad resistance to acids, caustics and oils, flexible in cold) and PVC (vinyl; resists acids, caustics, water and many oils, stiffer, the long gauntlet). The constructions: unsupported (a dipped rubber skin with no fabric, often flock-lined, thin and dexterous: the 18 mil household latex glove, the 28 mil latex/neoprene, the 30 mil neoprene) and supported (a knit or jersey liner dipped in the rubber: the heavy PVC and nitrile gauntlets that take abrasion). For dishes and ordinary cleaning a flock-lined 18 mil latex or a nitrile household glove is the glove; for bleach, drain cleaner and caustic cleaners a nitrile, neoprene or PVC glove with a long cuff; for oil, grease, fuel and paint thinner nitrile; for resin and epoxy nitrile, disposable and changed often; for PVC glue (which is a solvent cement) a nitrile or PVC glove and ventilation. OSHA’s 1910.138 requires gloves wherever hands meet "skin absorption of harmful substances" or "chemical burns", chosen on the glove’s performance against that chemical, and the manufacturer’s chemical chart is the document that states it.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · Liberty Safety product pages, spec sheets and category pages (libertysafety.com, read Nov 11 2026); 29 CFR 1910.138 Hand protection (eCFR, saved Nov 9 2026); ANSI/ISEA 105 chemical permeation and degradation wording as our rule page states it; Armor Guys product pages, spec sheets, catalog C.009 and workbook C.010 (armorguys.com, read Nov 12 2026)
Liberty Safety 9460SP Chemical Resistant Gloves, Nitrile, Jersey Lined, BlueLiberty Safety 9460SP Chemical Resistant Gloves, Nitrile, Jersey Lined, BlueLiberty Safety prints fully coated nitrile, jersey lined, 2-1/2 inch plasticized safety cuff; sold by the dozen

How a chemical glove is rated, in one paragraph. ANSI/ISEA 105 rates chemical protection two ways, as our rule page states it: permeation, the time in minutes for the chemical to pass through the material at the molecular level (ASTM F739 breakthrough time), and degradation, the change in the material (swelling, softening, cracking) after contact. A manufacturer’s chemical resistance chart lists both for each glove material against each chemical, and the chart is the only source that answers "will this glove hold up to that chemical": latex is excellent against water and detergents and poor against oils and most solvents; nitrile is good against oils, fuels and many solvents and poor against ketones (acetone) and some chlorinated solvents; neoprene is broad against acids, caustics and oils; PVC is good against acids, caustics and alcohols and poor against most solvents. The chemical-resistance-chart guide linked below shows how to read one, and the solvent-by-solvent guides name the glove for isopropyl alcohol, acetone, bleach, muriatic acid, caustic soda and gasoline.

Where the Food Code comes in. A reusable rubber glove used for dishwashing in a restaurant is a utensil-contact item, and the "FDA conformance for repeated use with food" that Liberty Safety prints on its 2570SP and 2876SP latex/neoprene gloves is the statement that it is made of materials listed for that use; the food-handling glove guide linked below covers single-use gloves for food itself.

The rubber gloves, type by type

Each construction statement is Liberty Safety’s; the chemical behavior is as the manufacturers’ charts state it.

Household latex, 18 mil, flock linedThe yellow dish glove: an unsupported natural rubber latex glove, 12 inches, "flock lined" (a cotton fuzz inside for sweat and easy on-off), "embossed grip on palm and fingers", in yellow, blue and natural, with an "FDA food contact" statement on the yellow and natural styles. For dishes, mopping, bathrooms, mild cleaners. Not for oils, solvents or anyone with a latex allergy.
Latex/neoprene 28 mil and neoprene 30 mil, flock linedThe heavier household and light-industrial glove: 13 inches, flock lined, embossed grip, with "bacteriostatic and fungistatic additives" and "FDA conformance for repeated use with food" (Liberty 2570SP, 2876SP, 2650SP). Neoprene widens the chemical range to acids, caustics and oils; the glove for commercial dishwashing, bleach-based sanitizing and janitorial chemicals.
Supported nitrile (jersey lined, knit wrist or safety cuff)A jersey liner dipped in nitrile, "heavy weight fully coated" or palm-coated (Liberty 9373SP, 9363SP, 9460SP, 9430, with "Actifresh or Sanitized treated" on the 9430). Oil, grease, fuel, hydraulic fluid, degreasers, paint thinner, cutting oils; abrasion-resistant; the mechanic’s and machine shop’s reusable glove.
Supported PVC gauntlets, 10 to 18 inchesAn interlock or jersey liner "single dipped", "double dipped" or "triple dipped" in PVC, in 10, 12, 14 and 18 inch lengths (Liberty 2131 through 2638). Acids, caustics, detergents, wash-down, fish and food processing, concrete and lime; the long cuff for immersion. Not for most solvents, which soften PVC.
Disposable nitrile, 5 to 8 milSingle-use nitrile for short cleaning tasks, bleach wipe-downs, resin and epoxy work and anything you want to peel off and throw away; the 8 mil 2018W and the 12 inch 2022W are the heavier ones. Changed when contaminated or torn; the when-to-change guide linked below has the rules.
What is not a rubber gloveCotton, leather and coated knit gloves absorb or let through liquids and are not chemical gloves; a nitrile-palm knit has a bare knit back. "Rubber" in the trade means a dipped or molded elastomer glove, latex or synthetic.

The questions, one by one

Each answer uses the manufacturers’ statements and charts and the regulations named in the byline.

What are the different types of rubber gloves?

By material: natural rubber latex, nitrile, neoprene, PVC (vinyl), butyl and Viton for the specialist chemicals (the rubber-glove materials guide linked below covers all six). By construction: unsupported (a rubber skin, flock-lined or unlined, dexterous) and supported (a fabric liner dipped in rubber, tough). By thickness: disposable 3 to 8 mil, household 15 to 30 mil, industrial 30 mil and up. By length: 9 to 12 inch wrist gloves, 12 to 18 inch gauntlets, 22 inch and longer sleeves. By cuff: knit wrist, safety cuff, gauntlet, band top. By lining: unlined, flock, jersey, interlock, foam-insulated. Every Liberty Safety chemical glove page prints each of those.

What type of gloves protect your hands from hazardous chemicals, and what gloves to wear when dealing with chemicals?

A glove whose manufacturer’s chemical chart rates it for that chemical, at the concentration and the contact time of the job. There is no one glove for "chemicals": nitrile for oils, fuels and many solvents, neoprene or PVC for acids and caustics, butyl for ketones and esters, latex for water-based and dilute cleaners. OSHA’s 1910.138(b) says the selection is "based on an evaluation of the performance characteristics of the hand protection relative to the task(s) to be performed, conditions present, duration of use, and the hazards"; the safety data sheet names the hazard and the chart names the glove. The chemical-resistance-chart guide and the chemical-by-chemical guides linked below do the matching.

When should you wear chemical resistant gloves (the OSHA 10 answer)?

Whenever the hazard assessment under 1910.132(d) finds that hands are exposed to "skin absorption of harmful substances" or "chemical burns" (1910.138(a)): handling, mixing, cleaning with, or cleaning up a chemical whose safety data sheet lists a skin hazard. The OSHA 10 course answer is the same: when the SDS or the label calls for them, and in the material the chart rates for the chemical. Cal/OSHA’s section 3384 adds "radioactive materials" to the list.

Is it safe to wash dishes with rubber gloves, and what type of gloves for washing dishes?

Yes, and in a commercial kitchen a reusable glove used at the sink should be one its manufacturer states is made of materials listed for repeated food contact (Liberty Safety prints "FDA conformance for repeated use with food" on its 2570SP and 2876SP). The dishwashing glove is a flock-lined 18 to 28 mil latex or latex/neoprene, 12 to 13 inches, with an embossed grip; a nitrile household glove for anyone with a latex allergy. Rinse and hang them after use so the inside dries; a glove that stays wet inside grows what you were washing off.

Which gloves for washing clothes, and what are some non-toxic gloves for cleaning?

For laundry and household cleaning the same flock-lined latex or nitrile household glove, long enough to cover the wrist. "Non-toxic" is a consumer word; what a buyer can check is the material (nitrile and neoprene for a latex allergy), a food-contact or repeated-food-use statement if the glove will touch anything eaten, and "powder free" on disposables. No work glove we carry is sold as toxic; the question is which chemical the glove keeps off the skin.

What gloves to use when cleaning with bleach?

Household bleach (sodium hypochlorite, 3 to 8 percent) is handled in nitrile, neoprene or PVC; latex tolerates dilute bleach for a short wipe-down but is degraded by it over time. For a bleach wipe-down a disposable 5 to 6 mil nitrile; for mixing and mopping with bleach a reusable nitrile or neoprene household glove with a 12 to 13 inch cuff; for industrial-strength hypochlorite a supported PVC or neoprene gauntlet and splash goggles. The bleach-and-acids guide linked below has the chart figures.

What gloves for resin, epoxy and PVC glue?

Resin and epoxy: disposable nitrile, 5 to 8 mil, changed as soon as it is smeared, because uncured resin sensitizes skin and a glove that carries it around is worse than none; latex is permeated by many resin hardeners. PVC glue (solvent cement) and paint thinner: the solvents in them (THF, MEK, acetone, mineral spirits) pass through thin nitrile in minutes, so for more than a quick joint use a supported nitrile or, for ketone-heavy cements, a butyl glove, and work with ventilation; the methylene-chloride-and-solvents guide linked below has the breakthrough times by solvent.

Are rubber gloves reusable, and can you put rubber gloves in the laundry?

Household and supported rubber gloves are reusable by design: rinse the outside before taking them off, wash them with soap and water, and hang them open to dry; flock and jersey linings take a while. Do not put a dipped rubber glove through the washing machine or dryer; the agitation and heat crack the rubber and the lining holds water. Disposable gloves are not reused. Retire a reusable glove at the first swelling, stickiness, crack, pinhole or color change; that is the chemical in the material, and no washing removes it.

How do you dispose of rubber gloves?

A glove used with ordinary cleaners goes in the trash. A glove contaminated with a hazardous chemical follows the chemical’s safety data sheet and the facility’s hazardous-waste rules (a glove wet with a solvent or a listed waste is handled as that waste); a glove contaminated with blood goes as regulated waste under 1910.1030. Nitrile and latex are not recycled in ordinary programs; the biodegradable-and-recycling questions are in the rubber-glove materials guide linked below.

Will rubber gloves stop static electricity, and why are rubber gloves yellow?

Rubber is an insulator, so a rubber glove keeps a static charge from passing through the hand to a grounded object; it does not drain the charge from you, so for electronics work the answer is a grounding strap, not a glove, and for electrical shock the answer is a tested rubber insulating glove (the electrical guides linked below), never a cleaning glove. Yellow is a pigment choice that became a convention: it shows soiling, it is seen in a sink, and the first household latex gloves were sold yellow; Liberty Safety sells the same glove in yellow, blue and natural.

How to tell if gloves are chemical resistant?

The page or the glove prints it: a material (nitrile, neoprene, PVC, butyl), a thickness in mil, a length, and, on gloves tested to it, the EN ISO 374 flask pictogram with letter codes for the chemicals passed, or an ANSI/ISEA 105 permeation statement. A glove that prints none of those, or only "rubber" or "latex", is a general-purpose glove and is treated as untested. The manufacturer’s chart is the proof; our chemical-resistance-chart guide explains the letters and the minutes.

What is a substitute for rubber gloves, and how do you get rubber gloves on easily?

For a latex allergy, nitrile or neoprene; for dexterity, a thinner disposable nitrile; for heat, a terry or hot-mill glove; for cuts, a cut-resistant knit; for water with no chemical, a dipped PVC. There is no substitute for a chemical glove where the chemical is the hazard. To get them on: dry hands, a flock-lined glove, or a thin cotton liner under an unlined one; a pinch of talc inside a reusable glove, and for disposables the powder-free versions are made with a chlorinated or polymer inner surface so they slide on dry.

In plain words

  • Four materials: latex (dishes, water, dilute cleaners), nitrile (oils, fuels, many solvents), neoprene (acids, caustics, oils), PVC (acids, caustics, wash-down). Two constructions: unsupported (thin, dexterous) and supported (fabric liner, tough).
  • Dishes and household cleaning: flock-lined 18 to 28 mil latex or nitrile. Bleach: nitrile, neoprene or PVC. Oil and paint thinner: nitrile. Resin: disposable nitrile, changed often. PVC glue: supported nitrile or butyl and ventilation.
  • The manufacturer’s chemical chart (permeation minutes and degradation) is the only proof a glove resists a chemical. OSHA 1910.138 requires the glove to be chosen on it.
  • Reusable gloves are rinsed, washed and hung; never machine-washed. Retire them at the first swelling, crack or color change.
  • Rubber stops static passing through you but does not drain it; it is not an electrical glove.
  • Yellow is a convention from the first household gloves; the same glove comes in blue and natural.
  • Dispose of contaminated gloves by the chemical’s SDS and the facility’s waste rules. We sell nationwide by the dozen and the box.
Liberty Safety product pages, spec sheets and category pages (libertysafety.com, read Nov 11 2026); 29 CFR 1910.138 Hand protection (eCFR, saved Nov 9 2026); ANSI/ISEA 105 chemical permeation and degradation wording as our rule page states it

Questions people ask

What are the different types of rubber gloves?

By material (latex, nitrile, neoprene, PVC, butyl), construction (unsupported or supported), thickness, length, cuff and lining.

What gloves protect your hands from hazardous chemicals?

The glove the manufacturer’s chemical chart rates for that chemical: nitrile for oils and solvents, neoprene or PVC for acids and caustics, butyl for ketones.

Is it safe to wash dishes with rubber gloves?

Yes; in a commercial kitchen use a glove its manufacturer states conforms to repeated food use, such as Liberty Safety’s 2570SP and 2876SP.

What gloves for cleaning with bleach?

Nitrile, neoprene or PVC; disposable nitrile for a wipe-down, a long-cuff reusable glove for mixing and mopping.

What gloves for resin and epoxy?

Disposable nitrile changed as soon as it is smeared; latex is permeated by many hardeners.

What gloves for paint thinner and PVC glue?

Supported nitrile for short work; butyl for ketone-heavy cements; ventilation either way.

Are rubber gloves reusable?

Household and supported gloves are; rinse, wash with soap and water, hang to dry. Disposables are not.

Can you put rubber gloves in the laundry?

No; machine agitation and heat crack the rubber. Wash by hand and hang.

How do you dispose of rubber gloves?

Ordinary cleaners: trash. Hazardous chemicals: per the SDS and the facility’s waste rules. Blood: regulated waste under 1910.1030.

Will rubber gloves stop static electricity?

They keep a charge from passing through the hand but do not drain it; they are not electrical insulating gloves.

Why are rubber gloves yellow?

A pigment convention from the first household latex gloves; the same glove comes in blue and natural.

How do you tell if gloves are chemical resistant?

The page prints the material, mil, length and an EN ISO 374 or ANSI/ISEA 105 permeation statement; the manufacturer’s chart is the proof.

What are non-toxic gloves for cleaning?

A consumer word; check the material (nitrile or neoprene for latex allergy), a food-contact statement, and powder free.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Need gloves matched to a chemical or a cleaning job?Call (925) 215-7337 or email us the safety data sheet and the task and we will quote chemical gloves by the dozen with the manufacturer’s data listed. We sell nationwide.
Chemical glove category

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.