Scaffold erectors and dismantlers work at height all day: ANSI Z359 harnesses with dorsal and side D-rings, twin-leg lanyards for 100% tie-off while climbing, self-retracting lifelines, anchor straps and tool lanyards (ANSI/ISEA 121) so nothing drops on the crew below. Add impact and cut-resistant gloves for couplers and planks, Class 2 hi-vis, hard hats with chin straps, knee pads and cones and barricade tape for the drop zone.
Finders for this trade
Each finder lists every product we carry in that family with the ratings as the manufacturer publishes them, and starts with a "what is the job" pick.
- Fall Protection by Category
- Head Protection by Type and Class
- Gloves by Cut Level and Coating
- Hi-Vis Clothing by Class
Guides
Plain-words answers with the standard cited, and the products that carry the rating under each.
- Safety helmet vs hard hat: what the chin strap and Type II change
- Type I vs Type II hard hats: what the types mean
- How to put on a safety harness and check the fit
- Do you need a harness on a scissor lift or boom lift?
- OSHA safety harness requirements: what 1926.502(d) says
- How often must a harness be inspected, and what to look for
- Fall protection on ladders: what 1910.23 and 1926.1053 require
- Fall protection on scaffolds: when it is required and what kind
Shop
Fall Protection Harnesses Lanyards Self-Retracting Lifelines Tool Lanyards Hand Protection Hi-Vis Apparel Head Protection Ergonomic Protection Traffic Safety
Ordering
Card, purchase order or invoice terms; agencies and institutions welcome. Email a list of item numbers and quantities to cs@bayshoresafety.com, see how to buy, or call (925) 215-7337, Monday to Friday 7:30 am to 4:00 pm Pacific. We sell nationwide.