Skip to main content

First Aid Kits

ANSI/ISEA Z308.1 Class A and Class B kits for vehicles, job sites and plants, contractor kits, personal kits, bloodborne pathogen kits and SmartCompliance cabinets from First Aid Only. Each listing shows the person count and the contents.

In this category

218 products from First Aid Only, PIP, Anchor Brand. Sold by the pack (12).

Brands in this category: First Aid Only (192) · PIP (22) · Anchor Brand (4)

What the rules say about first aid kits

OSHA 1910.151 Medical Services and First Aid: what it requires and the equipment it names: 29 CFR 1910.151 requires every general industry employer to ensure the ready availability of medical personnel for advice and consultation, to have a person or persons adequately trained to render first aid where there is no infirmary, clinic or hospital in near proximity used for treating injured employees, to keep adequate first aid supplies readily available, and to provide suitable facilities for quick drenching or flushing of the eyes and body within the work area wherever eyes or body may be exposed to injurious corrosive materials. ANSI/ISEA Z308.1 Minimum Requirements for Workplace First Aid Kits: what it requires and the equipment it names: ANSI/ISEA Z308.1 is the American National Standard for Minimum Requirements for Workplace First Aid Kits and Supplies. OSHA does not incorporate it as a rule; 29 CFR 1910.151(b) requires adequate first aid supplies to be readily available, and non-mandatory Appendix A says the contents listed in Z308.1 are adequate for small worksites, so a Z308.1 kit is the way most employers show they meet the paragraph. Every rule page lists the equipment the rule names with the products we carry for it; the safety rules index has them all.

Guides for first aid kits

How many first aid kits does a workplace need, and where? · First aid kits for vehicles and crews: what 1926.50 requires on a jobsite · OSHA first aid kit requirements: what 1910.151 and ANSI Z308.1 require · Type I, II, III and IV first aid kits: the container ratings · What should be in a workplace first aid kit? The Z308.1 minimum fill · ANSI Z308.1 Class A vs Class B first aid kits: what is in each

First Aid Kits questions

What are the OSHA compliance updates for 2026? The cited list is the one yearly publication on this page; the fiscal year 2026 preliminary list came out in October 2026 and the final count follows. Rule changes in force in 2026 are covered in the fall protection and PPE guides linked below (the construction PPE fit rule from January 2025, the fall protection dates), not on this list. More in the guide: What are the most common OSHA violations? The 10 most frequently cited standards, and the PPE behind four of them

What should a workplace first aid kit include? At minimum the ANSI Z308.1-2021 Class A fill in the table above: bandages, gauze, tape, antiseptic, burn treatment, cold pack, eye wash, gloves, CPR barrier, foil blanket and a guide. Class B has more of each plus a tourniquet, a splint and a 4-inch roller bandage. More in the guide: OSHA first aid kit requirements: what 1910.151 and ANSI Z308.1 require

What are the OSHA requirements for fall protection inspection? Construction: personal fall arrest systems inspected prior to each use for wear, damage and other deterioration, defective components removed from service (1926.502(d)(21)). General industry: inspected before initial use during each workshift for mildew, wear, damage and other deterioration (1910.140(c)(18)). Anything that has arrested a fall comes out of service until a competent person clears it ((d)(19); (c)(17)). OSHA sets no written-record or annual requirement; ANSI Z359.2 and the manufacturers do. More in the guide: How often must a harness be inspected, and what to look for

What is a first aid kit? As the manufacturer lists it: electrolyte tablets or drink mix, instant cold packs, cooling towels, and often a thermometer and a guide card. The kits in the band show each manufacturer’s contents on the product page. More in the guide: Heat exhaustion vs heat stroke: the signs and what to do

What's in a class B first aid kit? Class B holds more of each item and adds a 4 x 24 inch splint, a tourniquet and a 4-inch roller bandage. Class A is the baseline for common injuries; Class B is for higher-risk or larger workplaces. More in the guide: ANSI Z308.1 Class A vs Class B first aid kits: what is in each

What is in a first aid kit? As the manufacturer lists it: electrolyte tablets or drink mix, instant cold packs, cooling towels, and often a thermometer and a guide card. The kits in the band show each manufacturer’s contents on the product page. More in the guide: Heat exhaustion vs heat stroke: the signs and what to do

First Aid Only series

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.