GX-Force configurations by gas set
GX-Force LEL (5)
GX-Force O2 (6)
GX-Force H2S (4)
GX-Force CO (3)
GX-Force LEL/O2 (6)
GX-Force LEL/H2S (4)
GX-Force LEL/CO (5)
GX-Force O2/H2S (5)
GX-Force O2/CO (4)
GX-Force LEL/O2/H2S (5)
GX-Force LEL/O2/CO (H2-compensated sensor) (1)
GX-Force LEL/O2/CO (6)
GX-Force O2/H2S/CO (1)
GX-Force LEL/O2/H2S/CO (18)
Source: RKI Instruments product data file, Sept 2026 (configuration per part number); prices from the store.
GX-Force specifications
| Item | RKI Instruments data |
|---|
| Sample method | Pump (sample draw); Internal sample pump, nominal 0.5 L/min, 100 ft sample range, hydrophobic filter |
| Power source | Rechargeable lithium-ion battery, USB Type-C; approx. 30 hours continuous operation (25 °C, fully charged, no alarm, no backlight) |
| Display | LCD digital (7-segment + 14-segment + icons) with backlight |
| Alarms | Gas alarm: lamp flashing, continuous modulating buzzer, gas concentration display flashing, vibration; self-resetting or latching. Fault alarm: system, clock or sensor abnormality, battery voltage drop, calibration failure, pump abnormality, low flow rate |
| Alarm display | Lamp flashing, continuous modulating buzzer (approx. 90 dB at 30 cm), gas concentration display flashing, vibration |
| Response time | CH4 within 30 seconds, HC within 40 seconds (LEL); O2 within 20 seconds; CO and H2S within 30 seconds (T90) |
| Operating temperature and humidity | -20 to +50 °C (-4 to +122 °F), no sudden changes; 0 to 95% RH non-condensing |
| Case | IP67 equivalent |
| Dimensions | approx. 2.52 in W x 6.81 in H x 1.85 in D (excluding protrusions) |
| Weight | approx. 9.87 oz |
| Datalogging | Maximum 3,600 items, 5-minute interval (adjustable); USB 2.0 Type-C connection |
| Standard accessories | USB Type-C cable, belt clip, rubber nozzle (per configuration: AC adapter, 12 VDC car adapter, hose and probe) |
| Optional accessories | Carrying case, calibration kit, SDM-Force calibration station |
| Approvals | Intrinsically safe construction: IECEx Ex da ia IIC T4 Ga / Ex ia IIC T4 Ga; ATEX II1G Ex da ia IIC T4 Ga / II1G Ex ia IIC T4 Ga; c QPS us Class I, Div 1, Groups A, B, C, D, Ex da ia IIC T4 Ga (with NCR-6309 LEL sensor) / Ex ia IIC T4 Ga (without); Class I, Zone 0 AEx da ia IIC T4 Ga / AEx ia IIC T4 Ga |
| Warranty | Three years material and workmanship |
Source: RKI Instruments product page https://www.rkiinstruments.com/product/gx-force-portable-4-gas-monitor/, fetched Nov 8 2026 (common specifications).
GX-Force detectable gases
| Gas | Sensor | Measuring range (increment) | Accuracy | Preset alarms |
|---|
| LEL | Catalytic combustion (CH4 or HC) | 0 - 100% LEL (1% LEL) | Not stated on the RKI page | 1st 10% LEL; 2nd 25% LEL; 3rd 50% LEL; OVER 100% LEL |
| O2 | Electrochemical | 0.0 - 40.0 vol% (0.1 vol%) | Not stated on the RKI page | L 19.5 vol%; LL 18.0 vol%; H 23.5 vol%; OVER 40.0 vol% |
| CO | Electrochemical | 0 - 2,000 ppm (1 ppm) | Not stated on the RKI page | 1st 25 ppm; 2nd 50 ppm; 3rd 1,200 ppm; TWA 25 ppm; STEL 200 ppm; OVER 2,000 ppm |
| CO (H2-compensated sensor) | Electrochemical, H2-compensated | 0 - 2,000 ppm (1 ppm) | Not stated on the RKI page | 1st 25 ppm; 2nd 50 ppm; 3rd 1,200 ppm; TWA 25 ppm; STEL 200 ppm; OVER 2,000 ppm |
| H2S | Electrochemical | 0.0 - 200.0 ppm (0.1 ppm) | Not stated on the RKI page | 1st 5.0 ppm; 2nd 30.0 ppm; 3rd 100.0 ppm; TWA 1.0 ppm; STEL 5.0 ppm; OVER 200.0 ppm |
Source: RKI Instruments product page https://www.rkiinstruments.com/product/gx-force-portable-4-gas-monitor/, fetched Nov 8 2026 (detectable gases table). Preset alarms are RKI factory settings, user adjustable.
Exposure limits for the gases the GX-Force detects
| Gas | CAS | OSHA PEL | NIOSH REL | NIOSH IDLH |
|---|
| Hydrogen sulfide (H2S) | 7783-06-4 | C 20 ppm 50 ppm [10-minute maximum peak] | C 10 ppm (15 mg/m³) [10-minute] | 100 ppm |
| Carbon monoxide (CO) | 630-08-0 | TWA 50 ppm (55 mg/m³) | TWA 35 ppm (40 mg/m³) C 200 ppm (229 mg/m³) | 1200 ppm |
29 CFR 1910.146(b) defines a hazardous atmosphere to include a flammable gas, vapor or mist in excess of 10 percent of its lower flammable limit (LFL), an atmospheric oxygen concentration below 19.5 percent or above 23.5 percent, and any atmospheric concentration of a substance that could result in employee exposure in excess of its dose or permissible exposure limit.
Source: NIOSH Pocket Guide to Chemical Hazards; 29 CFR 1910.146(b). Published limits, not a recommendation for any task.
GX-Force documents
Source: RKI Instruments GX-Force downloads, RKI Instruments product page https://www.rkiinstruments.com/product/gx-force-portable-4-gas-monitor/, fetched Nov 8 2026.
GX-Force features
- 2 Operating modes - Normal and Leak Check
- Internal sample pump with 100 ft sample range
- 30 hours of operation (Lithium-ion battery)
- USB Type-C charging & data connection
- Easy to grip lightweight design - 2.5 in W x 6.81 in H x 1.85 in D, 9.87 ounces
- Water and dust resistant design, IP67
- Field replaceable sensors & filters
- Impact resistant body
- Intrinsically safe
- Large LCD Auto-backlit display
- 3 Year warranty
Source: RKI Instruments feature list, RKI Instruments product page https://www.rkiinstruments.com/product/gx-force-portable-4-gas-monitor/, fetched Nov 8 2026.
Guides: what a 4-gas monitor measures · bump test vs calibration · how to read a gas monitor alarm · confined space gas testing order · what Class I Div 1 means · sensor life · what LEL means · oxygen deficiency and enrichment · H2S exposure limits · CO exposure limit · every gas monitor by gas, sampling and battery.
RKI Instruments GX-Force Sample-Draw Gas Monitors questions
What is the RKI GX-Force? RKI's smallest personal 1 to 4 gas detector with a built-in sample pump: a 100 ft sampling range, about 30 hours on the Li-ion battery, USB Type-C charging, two operating modes (Normal, and Leak Check, which reads combustibles in ppm) and the same micro sensors as the GX-3R and GX-3R Pro, as RKI describes it.
What gases does the GX-Force detect? Combustible gas (LEL, methane as standard), oxygen (O2), hydrogen sulfide (H2S), carbon monoxide (CO) across the configurations we stock; the RKI page lists the sensor options LEL, O2, CO, CO (H2-compensated sensor), H2S.
Is the GX-Force intrinsically safe? Yes. RKI lists an intrinsically safe construction for the GX-Force: IECEx Ex da ia IIC T4 Ga / Ex ia IIC T4 Ga; ATEX II1G Ex da ia IIC T4 Ga / II1G Ex ia IIC T4 Ga; c QPS us Class I, Div 1, Groups A, B, C, D, Ex da ia IIC T4 Ga (with NCR-6309 LEL sensor) / Ex ia IIC T4 Ga (without); Class I, Zone 0 AEx da ia IIC T4 Ga / AEx ia IIC T4 Ga.
How long does the GX-Force battery last? RKI rates the Li-ion battery at approximately 30 hours at 25 °C with no alarm and no backlight; it charges by USB Type-C.
How far can the GX-Force draw a sample? RKI lists an internal sample pump with a 100 ft sample range at a nominal 0.5 L/min, with a hydrophobic filter; most configurations ship with a 5 to 30 ft hose and probe.
How do you calibrate an RKI GX-Force? With an RKI calibration kit or in the SDM-Force calibration station, both of which RKI lists for the GX-Force; the GX-Force logs calibration and bump test history. The steps are in our guide how to calibrate an RKI GX-Force or GX-3R Pro.