Skip to main content
Home › Guides › Eye and face › Safety glasses all day
Guide · Eye and face · Marks, standards and wear

Bayshore Safety & Industrial Supplies Guide

Is it okay to wear safety glasses all day? Which ANSI standard covers eye protection, Z87 vs Z87.1 vs Z87+ vs Z87-2, whether polycarbonate lenses count, how to know a lens is safety glass, the downsides, the three types of goggles, and yellow lenses

Yes. Safety glasses are made to be worn all day: the standard that covers them, ANSI/ISEA Z87.1, tests the lenses for optical quality (refractive power, prism, haze) as well as impact, so a lens that carries the mark does not strain the eye the way a cheap distorted lens does, and the polycarbonate lenses in the glasses below weigh about an ounce a pair. The things that make all-day wear miserable are scratches, fog, a frame that pinches, and a tint worn indoors, and each has a fix (anti-scratch and anti-fog coatings, adjustable temples and a rubber nosepiece, a clear lens inside). The marks on the frame tell you what you have: Z87 is the basic-impact mark, Z87+ the high-impact mark, Z87.1 the number of the standard itself, and Z87-2 the mark on a prescription frame; "Z87.2" is a misreading of that last one. Polycarbonate alone does not make a safety lens; the Z87 mark does, because it means the finished lens and frame passed the tests. OSHA’s 1910.133 is the rule that requires eye protection and names Z87.1 as the standard it must meet.

Bayshore Safety. Industrial safety and PPE supplier since 2017. · Current as of November 2026 · Liberty Safety product pages, spec sheets, category pages and About page (libertysafety.com, read Nov 11 2026); 29 CFR 1910.133 Eye and face protection and 1926.102 Eye and face protection (eCFR, saved Nov 9 2026); Cal/OSHA Title 8 section 3382 Eye and Face Protection (dir.ca.gov, saved Nov 9 2026); ANSI/ISEA Z87.1 as our rule page and the manufacturers state it
Liberty Safety iNOX 1717 Safety Glasses, Semi-Rimless, Z87.1+, 4 TintsLiberty Safety iNOX 1717 Safety Glasses, Semi-Rimless, Z87.1+, 4 TintsLiberty Safety prints Z87.1+, semi-rimless wrap-around polycarbonate lens, anti-scratch and anti-fog coatings, rubber temples and nosepiece; sold by the pair

The marks, decoded. ANSI/ISEA Z87.1 is the standard: "Occupational and Educational Personal Eye and Face Protection Devices", the one 29 CFR 1910.133(b)(1) names (the 2010 edition by number, with later editions accepted under (b)(2) as "at least as effective"). Z87 on a lens or frame is the mark of a device that passed the basic impact tests. Z87+ is the mark of one that passed the high-impact tests, which the manufacturers describe as a 500 gram pointed projectile dropped from 50 inches and a 6.35 mm steel ball fired at 150 feet per second for spectacles (250 for goggles, 300 for face shields), with the lens staying in the frame. Z87-2 is the mark on a prescription frame: it means the frame was tested with lenses of the right thickness and a lab can fill it with prescription lenses to the standard; "Z87.2" in a search is that mark misread. The other letters: D3 splash and droplet, D4 dust, D5 fine dust (goggle marks), W with a number for a welding shade, U with a number for ultraviolet, L for visible light, R for infrared, V for variable tint, S for special purpose, H for a small head size. Liberty Safety’s iNOX and BrandX glasses are printed "Z87.1+"; the rule page linked below has the whole list.

What the rule says. 1910.133(a)(1): each affected employee "uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation"; (a)(2) side protection where there are flying objects; (a)(3) prescription wearers get eye protection that incorporates the prescription or fits over it; (a)(4) the device is "distinctly marked to facilitate identification of the manufacturer"; (a)(5) filter lenses by shade. Cal/OSHA 3382 is California’s version.

Z87 vs Z87.1 vs Z87+ vs Z87-2, and the three goggles

As ANSI/ISEA Z87.1 is stated on our rule page and the manufacturers’ pages.

Z87.1The standard’s number. A product is "made to Z87.1"; the mark on it is Z87 or Z87+. A frame printed Z87.1 is using the standard’s name as the mark, which the standard allows.
Z87 (basic impact)Passed the basic drop-ball test. Adequate where the hazard assessment finds low-energy flying particles; most work eyewear sold today carries the plus instead.
Z87+ (high impact)Passed the high-mass and high-velocity tests. The mark to look for on a jobsite, in a shop and anywhere a tool or a grinder is running. Every Liberty Safety iNOX and BrandX pair in the band is Z87.1+.
Z87-2 (prescription frame)The frame was tested for prescription lenses of the standard’s thickness; a lab fills it. It is not "better than Z87+" and not a separate standard; it is the prescription route, and the prescription guide linked below explains ordering.
Direct-vent gogglesOpen vents in the frame for airflow and anti-fog; impact and large-particle protection (Liberty 1780C, "direct ventilation for breathability"). Not for splash.
Indirect-vent goggles (D3)Hooded vents that let air in and keep liquid out; the chemical-splash goggle (Liberty 1790, "indirect ventilation for added breathability and splash protection", and the foam-lined 1770). The D3 guide linked below.
Non-vented and sealed goggles (D4, D5)No vents, a foam seal; for fine dust, gas and vapor; fog without an anti-fog lens. The goggles guide linked below sorts the marks.

The questions, one by one

Each answer uses the standard’s wording as the manufacturers print it and the regulations named in the byline.

Is it okay to wear safety glasses all day?

Yes, and on most sites it is required all day. A Z87.1 lens is held to optical limits (the standard tests refractive power, astigmatism, prism and haze on plano lenses) precisely so that a worker can wear it for a shift without eye strain; the lens is polycarbonate, lighter than glass, and blocks ultraviolet. The all-day problems are the frame and the lens condition, not the standard: pick a frame with adjustable or rubber temples and a nosepiece that fits (Liberty’s 1710 has "four adjustable temple lengths"), a clear lens indoors and a gray one in sun, anti-fog where you sweat, and replace a scratched lens. Prescription wearers get a Z87-2 pair or an over-the-glass frame so they are not squinting through two lenses.

What ANSI standard covers eye protection, and is ANSI the same as Z87?

ANSI/ISEA Z87.1, "Occupational and Educational Personal Eye and Face Protection Devices", written by the International Safety Equipment Association and approved by ANSI. OSHA’s 1910.133(b) names the 2010, 2003 and 1989 editions and accepts later ones as at least as effective. ANSI is the institute that approves standards (the what-is-ANSI guide linked below); Z87 is the mark the eyewear carries; they are not the same thing, and "ANSI Z87" on a listing means the product claims the mark.

What does it mean if frames are marked with Z87 or Z87-2?

Z87 (or Z87.1) on a frame means the frame passed the standard’s tests with its own lenses: a basic-impact safety frame. Z87-2 means the frame was tested as a prescription frame, with lenses of the thickness the standard sets, so an optical lab can fit prescription lenses to it and the pair stays within the standard. Both marks belong on the frame front or temple with the manufacturer’s mark that 1910.133(a)(4) requires; a frame with neither is a dress frame whatever the lens is made of.

What is the difference between Z87 and Z87.1, and between Z87.1 and Z87+?

Z87.1 is the standard; Z87 is the mark of a device that meets its basic-impact requirements; Z87+ is the mark of one that meets its high-impact requirements. There is no "Z87.1 vs Z87" product difference beyond the manufacturer’s choice of how to print the mark. The plus is the difference that matters on a jobsite, and the Z87 vs Z87+ guide linked below has the test figures.

Is Z87-2 better than Z87+, and what is Z87.2+?

They are not ranked against each other: Z87+ is the high-impact mark, Z87-2 is the prescription-frame mark, and a prescription safety frame can carry both (a Z87-2 frame whose lenses are made to the high-impact level is marked Z87-2+ by the lab). "Z87.2" and "Z87.2+" are the Z87-2 mark with the hyphen misread as a point; there is no Z87.2 standard.

Do polycarbonate lenses count as safety glasses, and what glasses are considered safety glasses?

Not on their own. Polycarbonate is the material nearly all safety lenses are made of, but a dress frame with polycarbonate lenses has not been tested as a system and carries no mark, so under 1910.133 it is not eye protection. Safety glasses are glasses marked Z87 or Z87+ (and Z87-2 with prescription lenses) by their manufacturer, with side protection where flying objects are the hazard. The certification-marks guide linked below has what OSHA accepts.

How do you know if it is safety glass?

Look for the mark: Z87, Z87+ or Z87-2 molded or printed on the lens or the frame, with the manufacturer’s mark or logo beside it (both are required). No mark, no safety glass. For a window or a car, "safety glass" means laminated or tempered glass and is a different subject.

What are the downsides of wearing safety glasses?

Fog, scratches, pressure marks from a tight frame, a lens that distorts because it is scratched or was never made to the optical limits, glare from a clear lens in sun, and the habit of pushing them onto the forehead where they protect nothing. None is a reason not to wear them; each has a fix in the band below: anti-fog coatings and the fogging guide, anti-scratch coatings and the cleaning guide, rubber temples and nosepieces, gray or indoor/outdoor tints, and a lanyard. The one real limit is that glasses do not seal: for splash, fine dust or vapor the hazard assessment calls for goggles.

What are the three main types of goggles, and what are the ANSI standards for goggles?

Direct-vent (airflow through open vents; impact and large particles), indirect-vent (hooded vents; the chemical-splash goggle, marked D3) and non-vented or sealed (fine dust, gas and vapor, marked D4 and D5). All three are covered by the same ANSI/ISEA Z87.1 standard as spectacles, with the goggle-specific marks D3, D4 and D5 and the higher-velocity impact test (250 feet per second for the high-impact mark). The goggles guides linked below cover when each is required.

What is the importance of safety goggles, and what is the correct use for safety goggles?

Goggles seal to the face where glasses do not, so they are the eye protection for liquid splash, fine dust, and work where particles come from every direction (grinding overhead, chipping, blowing out). The correct use: the strap over the head and the frame seated against the face all round, vents matched to the hazard (indirect for liquids, none for vapor), an anti-fog lens or a foam-lined frame where they fog, and over prescription glasses when the frame allows it. 1910.133(a)(1) lists the hazards (liquid chemicals, acids, caustics, gases, vapors) that call for a sealed goggle rather than glasses.

Why are safety goggles yellow?

Amber and yellow lenses raise contrast in low light and haze by filtering blue; shooters, forklift drivers in dim warehouses and night crews pick them for that. They are a tint, not a protection class, and they darken nothing; the lens-tint guide linked below explains clear, gray, amber, indoor/outdoor and mirror tints and the Z87.1 marks that go with each. Liberty Safety’s 1715RT comes in amber among its seven tints.

Can I buy safety glasses with an HSA, and who sells safety glasses?

Prescription safety glasses are prescription eyewear and are usually an eligible expense under a health savings or flexible spending account; plain non-prescription safety glasses usually are not, and the plan administrator decides, not the seller. Safety glasses are sold by safety suppliers, optical shops (prescription), hardware stores and marketplaces; we sell them by the pair and the dozen (we sell nationwide), and every pair in the band below carries the live price and the mark the manufacturer prints.

In plain words

  • Yes, wear them all day; Z87.1 lenses are tested for optical quality as well as impact. Fix the fog, the scratches and the fit instead of taking them off.
  • The standard is ANSI/ISEA Z87.1, named by OSHA 1910.133. Z87 is the basic-impact mark, Z87+ high impact, Z87-2 a prescription frame. There is no Z87.2.
  • Polycarbonate alone is not a safety lens; the mark is. Look for Z87 or Z87+ and the manufacturer’s mark on the frame.
  • Three goggles: direct vent (impact), indirect vent (splash, D3), sealed (dust and vapor, D4 and D5). All under Z87.1.
  • Yellow lenses are a contrast tint, not a protection class.
  • Prescription safety glasses are usually HSA-eligible; plain ones usually not; the plan decides.
  • Every Liberty Safety iNOX and BrandX pair below is printed Z87.1+. We sell nationwide.
ANSI/ISEA Z87.1 as our rule page and the manufacturers state it; 29 CFR 1910.133 Eye and face protection and 1926.102 Eye and face protection (eCFR, saved Nov 9 2026); Liberty Safety product pages, spec sheets, category pages and About page (libertysafety.com, read Nov 11 2026)

Questions people ask

Is it okay to wear safety glasses all day?

Yes; Z87.1 lenses are held to optical limits for all-day wear. Fix fog, scratches and fit rather than removing them.

What ANSI standard covers eye protection?

ANSI/ISEA Z87.1, named by OSHA 1910.133(b); later editions are accepted as at least as effective.

What does Z87 or Z87-2 on a frame mean?

Z87: the frame passed the basic-impact tests. Z87-2: a prescription frame tested for prescription lenses of the standard’s thickness.

What is the difference between Z87 and Z87.1?

Z87.1 is the standard; Z87 is the mark on a product that meets it. Z87+ is the high-impact mark.

Is Z87-2 better than Z87+?

They are different marks: prescription frame vs high impact. A prescription pair can be both (Z87-2+). There is no Z87.2.

Do polycarbonate lenses count as safety glasses?

Only when the finished pair is marked Z87 or Z87+; the material alone does not.

How do you know if it is safety glass?

The Z87, Z87+ or Z87-2 mark with the manufacturer’s mark on the lens or frame.

What are the downsides of wearing safety glasses?

Fog, scratches, pressure, glare and pushing them up; each has a fix. Glasses do not seal, so splash and dust call for goggles.

What are the three main types of goggles?

Direct vent (impact), indirect vent (splash, D3) and sealed (dust and vapor, D4, D5), all under Z87.1.

Why are safety goggles yellow?

Amber lenses raise contrast in low light; it is a tint, not a protection class.

Can I buy safety glasses with an HSA?

Prescription safety glasses usually qualify as prescription eyewear; plain ones usually do not; the plan administrator decides.

Which Liberty Safety glasses are Z87+?

Every iNOX and BrandX pair in the band is printed Z87.1+; the 1715RT is printed Z87.1.

The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.

Outfitting a crew with eye protection?Call (925) 215-7337 or email us the work and the quantities and we will quote glasses, goggles and face shields by the dozen with the manufacturer’s marks listed. We sell nationwide.
Eye protection selector

© 2026 Bayshore Safety & Industrial Supplies, Inc. All rights reserved. This guide may not be copied or republished without written permission.

How to buyCard, purchase order or invoice terms; quotes on request; agencies and institutions welcome.
Live Service & SupportReal people who know the products, Monday to Friday 7:30am to 4pm Pacific. 925-215-7337
We DeliverWe ship nationwide. Parcel and LTL freight to job sites and businesses across the U.S.