Fall Protection for Residential Construction
Fall Protection for Residential Construction: the OSHA and Cal/OSHA rule paragraphs condensed and linked, and the Safewaze and FallTech products whose own data names residential construction. We sell nationwide; ships in 1–2 business days; most orders arrive in 3–7 business days.
What the federal rule says
Each entry is condensed from the paragraph cited; the paragraph itself is the rule and the link opens it.
29 CFR 1926.501(b)(13): Residential construction: each employee engaged in residential construction activities 6 feet or more above lower levels shall be protected by guardrail systems, safety net systems or personal fall arrest systems unless the employer can demonstrate that those systems are infeasible or create a greater hazard, in which case the employer shall develop and implement a fall protection plan meeting 1926.502(k).
OSHA Directive STD 03-11-002: Compliance guidance for residential construction (December 16, 2010): rescinded the 1995 interim fall protection guidelines (STD 03-00-001) and requires employers to comply with 1926.501(b)(13) as written, so a fall protection plan is permitted only where the employer demonstrates infeasibility or a greater hazard; the directive defines residential construction as work where the end use is a home and the structure is built with traditional wood-frame methods and materials.
29 CFR 1926.502(k): Fall protection plan: prepared by a qualified person, developed specifically for the site, kept up to date, maintained at the job site, with the identity of the qualified and competent persons documented, a controlled access zone, and a safety monitoring system where no other alternative measure is implemented.
29 CFR 1926.501(b)(10) and (b)(11): Roofing work on low-slope and steep roofs at 6 feet or more, as the paragraphs set out; the residential paragraph (b)(13) governs residential construction activities other than roofing on a steep roof where (b)(11) applies.
29 CFR 1926.501(b)(4): Holes and skylights: covers, guardrails or personal fall arrest systems at 6 feet or more.
29 CFR 1926.502(d)(15): Anchorages used for attachment of personal fall arrest equipment must be independent of any anchorage used to support or suspend platforms and capable of supporting at least 5,000 pounds per employee attached, or be designed, installed and used under the supervision of a qualified person as part of a complete system that maintains a safety factor of at least two.
29 CFR 1926.502(d)(16): A personal fall arrest system must limit the maximum arresting force on an employee to 1,800 pounds when used with a body harness, be rigged so the employee can neither free fall more than 6 feet nor contact any lower level, bring the employee to a complete stop and limit the deceleration distance to 3.5 feet, and have sufficient strength to withstand twice the potential impact energy of a 6-foot free fall.
Source: 29 CFR, Occupational Safety and Health Standards, as published by OSHA (ecfr.gov), read Nov 6 2026.
California (Cal/OSHA)
Each entry is condensed from the paragraph cited; the paragraph itself is the rule and the link opens it.
Title 8 §1731(c): Residential-type roofing activities (roofing and re-roofing on single-family homes, townhouses, duplexes and the structures §1716.2 covers): on slopes 0:12 up to and including 7:12, protection where the fall distance is 6 feet or more; on slopes steeper than 7:12, protection regardless of height; personal fall protection systems, scaffolding, safety nets, guardrails or a fall protection plan with safety monitors and controlled access zones where conventional methods are shown infeasible.
Title 8 §1671.1: Fall protection plan: applies to construction operations where the employer shows conventional fall protection is infeasible or creates a greater hazard, with a presumption that conventional fall protection is feasible; prepared by a qualified person for the specific site, kept at the job site, implemented under a competent person, documenting why guardrails, personal fall arrest systems or safety nets cannot be used.
Title 8 §1670(a): Approved personal fall arrest, personal fall restraint or positioning systems shall be worn by employees whose work exposes them to falling in excess of 7 1/2 feet from the perimeter of a structure, unprotected sides and edges, leading edges, through shaftways and openings, sloped roof surfaces steeper than 7:12, or other sloped surfaces steeper than 40 degrees not otherwise adequately protected. Body belts shall not be used as part of a personal fall arrest system (effective January 1, 1998).
Source: California Code of Regulations, Title 8, as published by Cal/OSHA (dir.ca.gov), read Nov 6 2026.
Safewaze and FallTech products whose own description names residential construction
Each section lists the styles whose manufacturer title, page, category or document names the structure or the use; the ratings are the manufacturer's. Sizes and lengths are chosen on the style page. The series pages carry every part number, the standards written out and the documents. Safewaze first, then FallTech; the line above each FallTech table says which FallTech page or document put it here.
Safewaze roof anchors for wood-frame roofs
Anchors Safewaze titles for wood roofs; the fastener packs (16D nails, sheet metal screws, rivets) are on the series page.
Every part number in the series, with sizes and lengths: Safewaze Roofing Anchors.
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
Safewaze roofer kits
A harness, a rope lifeline with rope grab, a reusable roof anchor and a bag or bucket, as each kit page lists.
Every part number in the series, with sizes and lengths: Safewaze PRO Kits · Safewaze V-Line Kits.
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
Safewaze vertical lifelines and rope grabs
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
Safewaze construction harnesses
Every part number in the series, with sizes and lengths: Safewaze V-Line Harnesses · Safewaze PRO Harnesses.
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
Safewaze shock-absorbing lanyards
Every part number in the series, with sizes and lengths: Safewaze V-Line Lanyards · Safewaze PRO Lanyards.
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
Safewaze concrete and truss anchors
Every part number in the series, with sizes and lengths: Safewaze Concrete Anchors · Safewaze Strap Anchors.
Source: Safewaze product pages and technical data sheets (safewaze.com, fetched Nov 6 2026); the 2025 Safewaze file; the products listed are the Safewaze styles whose own description names the use or the structure, not a selection by Bayshore Safety.
FallTech products naming residential roofing
Why these are here: FallTech products whose own page names residential roofing or wood roof construction (9103JK Roofer's Kit "built for residential and commercial roofing work"; 7444 "residential roofing and wood roof construction"; 7429SSK permanent roof truss anchorage).
| Part number | Item | Version | Price | ||
|---|---|---|---|---|---|
 | 7429SSK | FallTech 7429SSK Roof Anchors, Truss Kit for Permanent Installation | $64.80 | ||
 | 7444 | FallTech 7444 Roof Anchors, Single-use Wood Roof Ridge | 2 versions: Single, Pack of 10 | $10.40 | Choose on the page |
 | 9103JK | FallTech 9103JK Roofer's Kits, 6 ft Pass-trough Anchor | $248.00 |
Every part number in the series: FallTech Roofing Anchorage · FallTech Roofer's Kits.
Source: FallTech product pages (falltech.com, fetched Nov 8 2026), FallTech category and industry pages, instruction manuals and brochures as cited above each table; the products listed are the FallTech styles that FallTech's own pages or documents place in this work, not a selection by Bayshore Safety.
FallTech wood roof and truss anchors
Why these are here: FallTech roofing anchors whose own title names wood (the structure), from the Roofing anchorages category.
Every part number in the series: FallTech Roofing Anchorage.
Source: FallTech product pages (falltech.com, fetched Nov 8 2026), FallTech category and industry pages, instruction manuals and brochures as cited above each table; the products listed are the FallTech styles that FallTech's own pages or documents place in this work, not a selection by Bayshore Safety.
FallTech roofer's kits
Why these are here: FallTech Roofer's Kits and Mini Kits category (falltech.com/fall-protection-products/kits/roofers-kits-and-mini-kits/).
Every part number in the series: FallTech Roofer's Kits.
Source: FallTech product pages (falltech.com, fetched Nov 8 2026), FallTech category and industry pages, instruction manuals and brochures as cited above each table; the products listed are the FallTech styles that FallTech's own pages or documents place in this work, not a selection by Bayshore Safety.
FallTech construction harnesses
Why these are here: harnesses whose FallTech title says Construction.
35 FallTech styles qualify; the first 16 are listed and every part number is on the series pages: FallTech Journeyman Flex Steel · FallTech Journeyman Flex Aluminum · FallTech Arc Flash · FallTech Contractor · FallTech Contractor Plus · FallTech Tradesman Pro · FallTech Advanced ComforTech Gel · FallTech FT-Arc Flash · FallTech FT-One · FallTech FT-One Fit · FallTech FT-Iron.
Source: FallTech product pages (falltech.com, fetched Nov 8 2026), FallTech category and industry pages, instruction manuals and brochures as cited above each table; the products listed are the FallTech styles that FallTech's own pages or documents place in this work, not a selection by Bayshore Safety.
Manufacturer sizing and fall clearance documents
Safewaze: Harness Fitting and Sizing (PDF) · Fall Clearance Chart (PDF). FallTech: Harness Sizing Chart, men 2026 (PDF) · Harness Sizing Chart, women 2026 (PDF) · Calculating Fall Clearance poster (PDF) · SRL quick guide (PDF). Each manufacturer's document applies to its own products; the figures on a style page come from that style's data sheet.
Guides: residential construction · OSHA roof rules · anchor points and the 5,000 lb rule · when fall protection is required · OSHA 1926 Subpart M explained · every fall protection item by type and standard.
Fall Protection for Residential Construction questions
Does OSHA require a fall protection plan? Not as the first choice. 29 CFR 1926.501(b)(13) requires guardrails, safety nets or a personal fall arrest system at 6 feet in residential construction; a written fall protection plan under 1926.502(k) is permitted only where the employer demonstrates those systems are infeasible or create a greater hazard, and OSHA Directive STD 03-11-002 (2010) withdrew the earlier guidelines that let framers use alternative measures without that showing. Cal/OSHA §1671.1 writes in a presumption that conventional fall protection is feasible.
What must a fall protection plan include? 29 CFR 1926.502(k): prepared by a qualified person for the specific site, kept current and at the site, documenting why conventional systems cannot be used at each location, the alternative measures taken, a controlled access zone, a safety monitoring system where no other measure is implemented, and the names of employees designated to work in the zones; California's §1671.1 lists the same elements.
At what height is fall protection required for residential construction? 6 feet above a lower level under 29 CFR 1926.501(b)(13), by guardrails, safety nets or a personal fall arrest system; a fall protection plan is allowed only where the employer demonstrates those are infeasible or create a greater hazard (OSHA Directive STD 03-11-002). California: §1731(c) for residential-type roofing at 6 feet on slopes up to 7:12, and §1670(a) at 7 1/2 feet for other residential construction work.
What are the OSHA regulations for setting trusses? Truss and rafter setting is residential construction under 1926.501(b)(13): 6 feet, with conventional fall protection unless infeasibility is demonstrated and a 1926.502(k) plan used; STD 03-11-002 withdrew the earlier guidelines that let framers use alternative measures without that showing.
What is a truss anchor? A roof anchor fastened to a truss or rafter. Safewaze titles 021-4042 Wood Truss/Attic Anchor and, for the roof deck, its reusable, knock-down, peak, ridge and permanent anchors; FallTech titles 7429SSK a truss anchor kit for permanent installation and describes 7444 for residential roofing and wood roof construction. The nails or screws are listed on each page and the strength rule is 1926.502(d)(15). FallTech's lanyard and web SRL manuals state those products are not suitable for residential roofing, which is why none is listed on this page.
The ratings, test results and standards shown here are the manufacturers' published values, reproduced as published. Nothing on this page is a recommendation by Bayshore Safety that any product is suitable for a particular task, hazard or workplace. Selecting safety products and protective equipment is the responsibility of the end user and the employer, based on their own hazard assessment and the regulations that apply to their work. Confirm every value on the manufacturer's own documentation before use.